Laserfiche WebLink
*,,SANTA <br />NA <br />tL{\]T{C <br />&BIDNC <br />ffit\cf <br />Plannlng & Bullding Agency <br />Bullding S.f.ty Divl3lon <br />20 Clvlc Centor Plazs <br />P.O. Box 1988 (M-19) <br />Santr Ana, CA 92702 <br />(714) 647-s800 <br />www.santa-ana.org <br />RESIDENTIAL <br />PHOTOVOLTA!C <br />CHECKLIST <br />--soL-o1 cBc 2013 <br />solar Photovottatc (Pv) checktist ror Dotached SINGLE FAMILy RESTDENCES Onty <br />lnstructlons: The licens€d contractor of record shall complete all sections, answer the len questions and <br />sign the certification section below. A copy <br />minimum 11" x 17" size. lf answorlno NOt <br />of TWO sets of plans, of <br />shall be required. <br />Proiect Address:1202 N. MCLEAN, SANTA ANA, CA 92703 <br />contractor company Hame: SOUTHWEST SUN SOLAR, INC <br />contractorLicenseNumber: 1004667 <br />of this form shall bo attachsd to each <br />o anv of the questlons, Dlan check <br />Ars the followlng appllcablo to the proposod proJect? <br />Will the PV systam layout provide th6 required thre€-foot wide clear accsss palhways <br />per Section 605.11 of th6 Califomia Fire Code, and is this shown on the roof ptan? <br />Will tho PV system be installsd on a roof having only one roofing layer with no <br />ovedays? <br />Will ths PV anay be flush mounted to the existing roof so that lhe plane of the <br />modulas (panels) are parallel to ths plane of the rooP <br />Will lho PV system weigh maximum 4 pounds per square feet or less? <br />Will the PV system b€ instrallod whare the modules do not overhang any roof edges <br />(such as eaves, gablad ends, ridges and hips)? <br />Will th6 PV system bs installed with a spac€ of 2- minimum to 10" maximum between <br />the underside of modules and the surfac€ of tho roof? <br />Will the PV system bs installed without using any bellast system or counter-weight <br />syslem? <br />Will the anchors be installod with a maximum horizontal anchor spacing of 6 feet <br />and is this maximum horizontal spacing shown on the plans? <br />Will the minimum 5/16' lag screws b6 installod with a minimum ot 2-112 inch <br />emb€dmBnt into roof raners (with prs-drilled holes) and is this minimum embedment <br />shown on the plans? <br />Are ALL the structural pages of the plans WET stamped and signsd by a Califomia <br />licensed professional engineer? (including project specific site plan, pV layout, <br />YES NO <br />1. 6tr <br />2. 6l El <br />3. ED <br />10. <br />ao <br />trtr <br />gtr <br />Etr <br />Etr <br />4. <br />5. <br />6. <br />7 <br />I <br />9 <br />trtr <br />Bltr <br />anchorage spacing, anchorage details and manufacture/s PV support information <br />I cerlify under penalty of pedury under lhe laws ol lhe State of California <br />pdnlNsmg TRANG CONG PHAM <br />Phone Number: 714 592 3g0g <br />Signature <br />Date: <br />Emait Address: pERMIT@SOUTHWESTSUNSOLAR.COM <br />R€v:8/1712015 <br />the is true: