Laserfiche WebLink
SANTA <br />ANA <br />Plannlng E Buildlng Agency <br />Bulldlng Safety Olvision <br />20 Clvic Centor Plaza <br />P.O. Bor 1988 (M-10) <br />Santa Ana, Ce92702 <br />(714) 647-5800 <br />w{w.aanta-ana.org <br />RESIDENTIAL <br />PHOTOVOLTAIC <br />CHECKLIST <br />soL{1 csc 2013 <br />Solar Photovoltalc (PV) Checkllst for Detached SINGLE FAMILY RESIDENCES Only <br />lnstructlons: Th€ licensed contractor of record shall complete all sections, answer the ten quesuons and <br />sign the certification section below. A copy of this form shall be attached to each of TWO sets of plans, of <br />minimum 11" x 17" size. <br />Prolect Address:2510 Jacaranda St, Santa Ana, CA 92705, US <br />Contiactor Company Name . Solar City <br />888104Gontractor Llcense Numbsr: <br />1 <br />YES NO <br />EI tr <br />Are the followlng appllcable to the proposed proiect? <br />Will the PV system layout provide the rsquired three-foot wid€ clear access pathways <br />per Section 605.11 of the California Fire Code, and is this shown on the roof plan? <br />Will the PV system b€ installed on a roof having only one rooling layer with no <br />overlays? <br />Will the PV array be flush mounted to the existing roof so that the plane of the <br />modules (panels) are parallel to the plane of the roof? <br />Will the PV system weigh maximum 4 pounds per square feet or less? <br />Will the PV system be installed where the modules do not overhang any roof edges <br />(such as eaves, gabled ends, ridges and hips)? <br />Will the PV system be installed with a space of 2" minimum to 10" maximum between <br />the underside of modules and the surface of the roof? <br />Will the PV system be installed without using any ballast syst€m or counter-weight <br />system? <br />Will the anchors be installed with a maximum horizontal anchor spacing of 6 feet <br />and is this maximum horizontal spacing shown on the plans? <br />Will th€ minimum 5/16" lag screws be installed with a minimum of 2-112 inch <br />embedment into roof rafters (with predrilled holes) and is this minimum embedment <br />shown on the plans? <br />Are ALL the structural pages of the plans WET stamped and signed by a Califomia <br />licensed professional engineer? (including proiect sp€cific site plan, PV layout, <br />anchorage spacing, anchorage details and manufacturer's PV support information.) <br />3 <br />4 <br />5 <br />atr <br />trtr <br />Eltr <br />@tr <br />Eltr <br />6 <br />7 <br />2. tro <br />I @tr <br />e @tr <br />10.@o <br />I cortlfy under penalty of parjury under the laws of the State of Callfornla that the above 13 true: <br />Print Name . ERIK FERNANDO LEZAMA Signature:F,rik Lezama <br />Phone Number:702-785-2998 <br />Email Address: ELEZAMA@TESLA.COM <br />Rev: 8/1712015 <br />Darr'.8/17/2Or7