My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
10194505 - Permit (2)
PBA
>
Building
>
Permits
>
N
>
Ninth St
>
2106 W Ninth St
>
10194505 - Permit (2)
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
11/21/2022 2:38:29 PM
Creation date
11/21/2022 2:38:27 PM
Metadata
Fields
Template:
Permit
Permit Number
10194505
Full Address
2106 W Ninth St
Permit ID
235209
Master ID Number
2017-139412
Project Name
Miscellaneous Counter1 Permit
Street Number
002106
Street Direction
W
Street Name
Ninth
Street Suffix
St
Building Use Code
Resid-1 unit
Job Types
Solar
Permit Type
Building
Applied Date
10/18/2017
Issued Date
10/18/2017
Finalized Date
11/8/2017
Flood Zone
X-0602320144J
Description of Work
Install new 3.0 kw roof mounted solar Pv system (11 panels) Per PV checklist.
Nature of Work
Solar
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
4
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
*-SANTA <br />NA-"'FiI <br />Planning & Building Ag0ncy <br />Building Safety Division <br />20 Civic Center Plaza <br />P.O. Box 1988 (M-19) <br />Santa Ana, CA 92702 <br />(714) 647-5800 <br />www.santa-ana.orq <br />RESIDENTIAL <br />PHOTOVOLTAIC <br />CHECKL!ST <br />soL-01 cBC 2013 <br />Project Address:+k <br />Contractor Company Name: <br />Contractor License Number: <br />Sor.r RO <br />2 <br />\Es No <br />UD <br />utr <br />Es <br />Are the following applicable to the proposed project? <br />\Mll the PV system layout provide the required three-foot wide clear access pathways <br />per Section 605.1 1 of the California Fire Code, and is this shown on the roof plan? <br />\Mll the PV system be installed on a roof having only one roofing layer with no <br />overlays? <br />\Mll the PV array be flush mounted to the existing roof so that the plane of the <br />modules (panels) are parallel to the plane of the roof? <br />\Mll the PV system weigh maximum 4 pounds per square feet or less? <br />Wll the PV system be installed where the modules do not overhang any roof edges <br />(such as eaves, gabled ends, ridges and hips)? <br />\Mll the PV system be installed with a space of 2" minimum to 10,, maximum between <br />the underside of modules and the surface of the roof? <br />Wll the PV system be installed without using any ballast system or counter-weight <br />system? <br />Wll the anchors be installed with a maximum horizontal anchor spacing of 6 feet <br />and is this maximum horizontal spacing shown on the plans? <br />Vvill the minimum 5/16" lag screws be installed with a minimum ol Z-llZ inch <br />embedment into roof rafters (with pre-drilled holes) and is this minimum embedment <br />shown on the plans? <br />Are ALL the structural pages of the plans WET stamped and signed by a Catifornia <br />licensed professional engineer? (including pro.iect specific site plan, pV layout, <br />anchorage spacing, anchorage details and manufacturer's pV support information.) <br />3 <br />4 Ntr <br />tr <br />tr <br />6 Ntr <br />, Ntr <br />8 Ntr <br />, Etr <br />'10 g D <br />I certify under penalty rjury under the laws of the State of California that the above is true: <br />Print Name Signature: <br />Date: \oPhone Number \\Lo <br />Email Address <br />Rev 8/1712015 <br />,(taaalhr^I 4.r m. fl^r- <br />Solar Photovoltaic (PV) Checktist for Detached STNGLE FAMtLy RESTDENCES Onty <br />lnstructions: The licensed contractor of record shall complete all sections, answer the ten questions and <br />sign the ce(ification section below. A copy of this form shall be attached to each of TWO sets of plans, of <br />minimum 1 1 " x 17" size. lf answerinq No to anv of the questions. plan check shall be required. <br />d\
The URL can be used to link to this page
Your browser does not support the video tag.