Laserfiche WebLink
Pl.nnlng & Bulldlng Agency <br />Bulldlng Safety Divi3ion <br />20 Clvic Center Plaze <br />P.O. Box 1388 ( -19) <br />Santa Ana, C492702 <br />(7r4) 647S800 <br />www.ranta-ana.org <br />RESIDENTIAL <br />PHOTOVOLTAIC <br />CHECKLIST <br />sol{r cBc 2013 <br />Solar Photovoltalc (PV) Checkllst for Detached SINGLE FAMILY RESIDENCES Only <br />lngtructlons; Tho liconsed contraclor of record shall complet€ all sections, answer the ten qu€stions and <br />sign ths c€rtification Eection below. A copy of this form shall be attached to each of TWO sets of plans, of <br />minimumll'x17"size. lf answerlnq NO to anv of the questons. plan check chall be rcoulrod. <br />ProJect Address:2102 Heliotrope Dr, Santa Ana, CA 92706, US <br />Contractor Company n".". Solar City <br />. BBB1O4Contractor Llcense Number <br />YES NO <br />tr tr1 <br />ArE the followlng appllcabh to the proposed proiect? <br />Will the PV system layout provide the required three-foot wide clear access pathways <br />per Section 605.1 1 of the California Fire Code, and is this shown on th€ roof plan? <br />Will th€ PV system be installed on a roof having only one rooling layer with no <br />overlays? <br />Will the PV array be flush mounted to the existing roof so that the plane of the <br />modules (panels) are parallel to the plane of the roof? <br />Will the PV system weigh maximum 4 pounds per square feet or less? <br />tMll the PV system be installed wher€ the modules do nol overhang any roof edges <br />(such as eav6s, gabled ends, ridgos and hips)? <br />Will th€ PV system be installed with a space of 2" minimum to 10" maximum b€tween <br />the underside of modules and the surface of the roon <br />Will the PV system be installed without using any ballast syst€m or counter-weight <br />system? <br />Will the anchors be installed with a maimum horizontal anchor spacing of 6 feet <br />and is this maximum horizontal spacing shown on the plans? <br />Will the minimum 5/16" lag screws be installed with a minimum ol 2-112 inch <br />embedment into roof rafters (with pre{rilled holes) and is this minimum embedment <br />shown on the plans? <br />Are ALL the Etructural pages of the plans WET stamped and signed by a Califomia <br />licensed professional engineer? (including prolect specilic site plan, PV layout, <br />anchorage spacing, anchorage details and manufacturer's PV support information.) <br />2 <br />J <br />trtr <br />ao <br />EID <br />Elo <br />trtr <br />EItr <br />4 <br />5 <br />6 <br />7 <br />8 <br />I <br />Eltr <br />@tr <br />10. E El <br />I cortlfy under penalty of periury undor tho laws oI th. State of Callfornia that tho above ls truo: <br />Print Name Lisette Lopez sig n"grr". Lisette Lopez <br />phone Number: 31 0.362.7549 <br />Email Addr€ss: lislopez@tesla.com <br />Rev: U17n015 <br />Date 7 / I /2018 <br />Drcrilv irRl b| Ler Lop.z <br />,,,,-SANTA <br />ANAJIiHil