Laserfiche WebLink
*,,SANTA <br />ANA <br />lll\11\G <br />iltlIDNC <br />ICilO <br />Planning & Buildlnn *"n", <br />Building Safety Dlvlslon <br />20 Clvic Center Plaza <br />P.O. Box 1988 (M-19) <br />Santa Ana, CA 92702 <br />(7r4) 647-5800 <br />www.santa-ana,org <br />RESIDENTIAL <br />PHOTOVOLTA!C <br />CHECKLIST <br />soL{l cBc 2013 <br />solar Photovoltaic (Pv) checktist for Detached stNGLE FAMTLy RESIDENCES onty <br />lnstructions: The licensed contractor of record shall com plete all sections, answer the ten questions andsrgnthe certification section below. A copy of this form shall be attached to each of TWO sets of plans, ofminimum 11" x '17" size. lf a rino NO to a of the o uestions. Dla n shall be re quired. <br />lctr,'RProject Address:t{ t;r:,t l.,,r.t A1 (- <br />Contractor Company Name: <br />Contractor License Number:1 <br />')n <br />4 <br />5 <br />YES NO1 Eltr <br />2. Etr <br />3 Elo <br />8 Etr <br />9 Etr <br />10.EE <br />Phone Number: ,: <br />trtr <br />Etr <br />Eltr <br />Ettr <br />Aro the following applicable to the proposed project? <br />will the PV system rayout provide the required three-foot wide crear access pathways <br />per Section 605.11 of the Califomia Fire Code, and is this shown on the roof plan? <br />Will the PV system be installed on a roof having only one roofing layer with no <br />ovedays? <br />Will the PV array be flush mounted to the existing roof so that the plane of the <br />modules (panels) are parallel to the plane of the roof? <br />Will the PV system weigh maximum 4 pounds per square feet or less? <br />will the PV system be insrarred where the modures do not overhang any roof edges <br />(such as eaves, gabled ends, ridges and hips)? <br />will the PV system be instaled with a space of 2" minimum to 10" maximum between <br />the underside of modules and the surface of the roof? <br />Will the PV system be installed without using any ballast system or counter_weight <br />system? <br />Will lhe anchors be installed with a maximum horizontal anchor spacing of 6 feet <br />and is this maximum horizontal spacing shown on the plans? <br />Will the minimum 5/16" lag screws be installed with a minimum ol 2_1lZ inc\ <br />embedment into roof €fters (with predri ed holes) and is this minimum ombedment <br />shown on the plans? <br />Are ALL the structural pages of the plans stiamped and signed by a Califomia <br />licensod professional engineer? (including project specific site plan, pV layout, <br />anchorage spacing, anchorage details and manufacturer,s pV support information.) <br />6 <br />7 <br />I cartify under penalty of perjury under the laws of the state of califomia that the above is true: <br />Print Name <-(,,,A tL- <br />4L\ e,tw 'bJ <br />Signature: <br />Date: 'l /a r1 <br />Email Address: ,.. <br />Revr 11/19/20'15 <br />-..L.,