Laserfiche WebLink
#11CC EVALUATIONv... SERVICE <br />ICC-ES Evaluation Report <br />www.icc-es.ora I (800) 423-6587 1 (562) 699-0543 <br />DIVISION: 07 00 00-THERMAL AND<MOISTURE <br />P.ROTECTION <br />Section: 07 32 13-Clay-Roof·Illas <br />REPORT HOLDER: <br />MARUHACHI CERAMICS OF AMERICAr INC., <br />dba MCA CLAY ROOF TILE <br />1985 SAMPSON AVENUE <br />CORONA, CALIFORNIA 92879 <br />(951) 736-9590 <br />www.mcatile.com. <br />EVALUATION SUBJECT: <br />MCA CLAY'ROOF TILES: ONE-PIECE MISSION, 10-INCH <br />STRAIGHT BARREL MISSION, 8-INCH STRAIGHT BARREL <br />MISSION, CORONA 'TAPERED MISSION, CLASSIC <br />TAPERED MISSION, ROMAN PAN, MF108 INTERLOCKING <br />FLAT, IMPROVED-S,· ORIENTAL AND CLASSIC "S" <br />MISSION TILES <br />1.0 EVALUATION SCOPE <br />Compliance with theffollowIng codes: <br />1 2009;and 2006 international Bul/ding Code® (IBC) <br />• 2009 and 2006 intemational Residential Code® (IRC) <br />m Other Codes (see(Section 8.0) <br />4Propertlesfe.valuated: <br />m WeatherEresistance <br />• Fire;classification <br />• Wind Oplift rasistan® <br />2.0 USES <br />MCA clay roof tiles, installe'd in accordance with this report, <br />are roof covering materials complying with Chapter 15 of <br />the iBC andiChapter 9 of the IRC, and may be used where <br />Class A, B or C roof assemblies are required. <br />3.0 DESCRIPTION <br />3.1 General: <br />The roof tiles are niachines-foritidd from nafural day ariel <br />fired to various degrees to obtain the required strength. <br />The tiles have a natural, glazed or spray-flash finish. Th-e. <br />surface of the glazed; tiles receives an acrylic glaze prior to <br />0trificatioh. The spray-flash finish·86¥isiats of a sprayed-Oh <br />mixture of.:natural clay:materials, which is then baked on <br />the surface of the tile. Accessory tiles such as ridge, gable, <br />hip, birdstop and turret tiles are also. available. See Figure <br />1 for tile profiles. <br />Most Widely.Accepted and.Trusted <br />ESR-2144 <br />Reissued August 1, 2011 <br />This reportis subjectto renewalin one year. <br />A Subsidiary 6f·the Int*mational C*de Cauribil' <br />3.2 Roof Tiles: <br />3.2.1 One-Piece Mission Tile: The. One-Piece Mission <br />tiles are S-sh®ed, 19-inches (483 mm) long, 141/2 inthes <br />(368 mm) wid6, and an averdge of-1/2 inch,(12.7 mm) thick. <br />The tiles weigh 7.8 pounds per square foot (38.0 kg/nf) <br />when installedwith a 3-ihch (76 mm) headlap and 2?/4-Inch <br />(70 mm) sidelap. The tiles have two nail holes in the pan. <br />and one nail hole in the cover side. The tiles are Type I, <br />Grade 1, in accordance with ASTM C 1167. <br />3.2.2 10-Inch Straight Barrel Mission Tile: Ii* 10-inch <br />Straight :Barrel Missiontile consists of a pan and cover <br />unit. The: tiles are 19 inches (483 mm) long and 10 inches <br />(254 mm) Wide, and have a thidkhess of 1/2 Inch (12.7 mm) <br />at thet center tapering to '/io inch (11.1 mm) at the sides. <br />The tiles Weigh 10.2 pounds per square foot (49.8 kg/m?) <br />when install*d with a 3-inch (76 mm) headlap and <br />131/2-inch (343 *rn) canter-to-center side spacing of pan <br />units. One nail hole; is provided at the top of each tile. <br />"The tiles are Type I, Grade) 1, in accordance with ASTM <br />C 1167. <br />3.2.1 8-Inch Straight Barrel Mission Tile: The 8-inch. <br />Straight Barrel Misdion tile consists of & pan and cover <br />unit. 'The tiles are 19 inche5 (483 mm) 'long, 8 inches <br />(203 mm) wide and approximately 1/2 Inch (12.7 mm) thick. <br />The tiles:weigh 10.7-pounds per square foot (52.2 kg/m?) <br />when installed:with a 3-inch (76 mm) headlap and 11-inch <br />(279 mm) center-to-center side spacing of pan units. One <br />rjai! Rolels provided at the top of each tile. The tiles are <br />Typel Grade 1, in accordance with ASTM C 1167% <br />3.2.4 Corona Tapered Mission Tile: The tile consists-of <br />a pan and cover unit measuting approximately 83/4 inches <br />(222 mm) wide.at the nose and 6 inches (152 mm) wide at <br />the head of *ach tile. Ihe tiles are 19 Inches (483 rnm) <br />long and approximately 1/2 inch (12.7 mm) thick. The tiles <br />Weigh 19.7 pounds' per square foot (52.2 kg/m2) when <br />installed with..a 3-inch (76 mm) headlap and 12-inchf (305 <br />mm) center-to-cehter side dpating:·of #An units. One nail <br />hole is provided at the top of each tile. The tlles< are Type I, <br />Grade 1, in accordance with ASTM C 1167. <br />3.2.5' Classlc Tapered Mission Tile: The tile consists <br />of a pan and cover unit measuring 714 Inches (184·mni) <br />wide at the nose-and 61/4 Inches (159 mm) at the head of <br />the tile. The tiles are 19 inches (483 mm) long and <br />approximately 1/2 inch (12.7 mm) thick. The tiles weigh <br />10.4 pounds per squar6 foot (50.8 ,kg/m') when initalled <br />with a 3-inch (76 mm) headlap and 10-inch (254 mm) <br />cunt*r-to-center side s#acingof pan units. One ndil hole <br />is·provided at the top of each tile. The tiles are Type I, <br />Grade 1, in abcordance with ASTM C 1167. <br />ICE-ES Evaltiotion RepAs'are not to be consinled as rep.resenting nesihefici or any other ati,ibiltes not spe®cally gddressed.nor. arfthey to be collitnted 3as an endorsement of the subje'ct ofthe report or a recbmmendatio-nfor its -nic. There ts no wdrranty by ICC Evaluation Senice. LLC, express or implied. as <br />to any fiding or other matter in this rep#rt. or as to any product covered by Ihe report. <br />t=D <br />Copyright'© 2011 Page 1:of 4 <br />t