|
125 SIGN COMPONENTS MANUAL (SAM)June 19, 2013
<br />3. The electrical ratings.
<br />4. abn multiple manufactures are involved, then a Factory ID identifying the product to a particular factory shall be provided.
<br />nal - "For Connection with Class 2 Circuits Only."
<br />SLOANLED, DIV OF SLOAN CO INC
<br />5725 OLIVAS PARK DR
<br />E215393
<br />VENTURA, CA 93003
<br />LED Modules, Cat. Nos. 701261, 701261-PW, 701340, with suffix -R, -O,-Y, -B, -G, -W or -A; Cat. Nos. 701340-PW with suffix -
<br />R, -O, -Y, -A, -B, -G or -W: Cat. No. 701340-CM.
<br />1.These products are only suitable for connection to a UL Listed or Recognized Class 2,24 V dc power source for Model 701340
<br />and 7.5 V dc or 5 V dc power source for Model 701261.
<br />2.These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limited supplies.
<br />3.The total number of Model 701261 LED Lighting Units are not to exceed a total of 75 units per Class 2 circuit. The total number
<br />of Model 701340 LED Lighting Units are not to exceed a total of 40 units per Class 2 circuit.
<br />4.These products are suitable for use in dry, damp and wet locations.
<br />5.These products are not required to be enclosed or protected from weather.
<br />Class 2 LEDs, "ThinLED", Model 701228, with suffix -A, -B, -G, -R, -W or -Y: Cat. No. 701228-18, with suffix -A, -B, -G, -R, -W or -Y.
<br />1. These products are only suitable for connection to a UL Listed or Recognized Class 2, max. 12 V dc power source. Only
<br />Models 701228-A, -R, or -Y are only suitable for connection to UL Listed or Recognized Class 2, max. 7.5 V dc.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2
<br />voltage and energy limited supplies.
<br />3. The total number of these products when interconnected is not to exceed a total of 14 feet or 14 "ThinLED" units per Class 2
<br />circuit. These products are not to draw a total wattage of greater than the secondar'y or output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations.
<br />5. These products are not required to be enclosed or protected from weather.
<br />Class 2 power supply, Model LED Outline Lighting Systems "FlexiBRIGHT", Cat. No. 701499-X-Y, where X and Y may be any
<br />alphanumeric character.
<br />1. These products are only suitable for connection to a UL Listed or Recognized Class 2,12 volt DC power source or less.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2
<br />voltage and energy limited supplies.
<br />3. These products are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply per Class
<br />2 circuit.
<br />4. These products are provided with wire soldered on the printed wiring board for connection.
<br />5. These products are suitable for use in dry, damp and wet locations.
<br />Class 2 LEDs, Modules designated, "LED STRIPE2 (Border Light)" and "701956-XXXXXX" series, where XXXXXX may be
<br />replaced with alphanumeric characters.
<br />1. These products are only suitable for connection to a UL Listed or Recognized Class 2,15 Volt or less DC power source.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2
<br />voltage and energy limited supplies.
<br />3. Class 2 LEDs, "LED STRIPE2 (Border Light)", is rated max. 48 Watts per module. When units are connected to a Class 2
<br />circuit, they are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations.
<br />Class 2 LED Module, Cat. No. 701269-xxx)0000<xx-MB Series, where x=00<xxxx may be blank or any alphanumeric characters.
<br />1. These products have been evaluated only for use when connected to the Class 2 output of a Listed or Recognized power
<br />source rated 15V DC or less.
<br />2. These products are suitable for use in dry, damp and wet locations with supply sources rated at 15 VDCor less.
<br />3. These products are not required to be enclosed or protected from the weather in the end product.
<br />4. These products may be secured in the end product with any available means.
<br />5. These products are rated for a maximum of 7.5 watts or less per module.
<br />Class 2 LED Border Light, Class 2 "Border Light", Cat. No. 701189-XXXXXXXXXX series.
<br />1. These products are only suitable for connection to a Class 2 power source, rated 30 Volt DC or less.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limits and which is rated greater than 30 V DC.
<br />3. These products are each rated max. 100 Watts per unit. When units are connected to a Class 2 circuit, they are not to draw a
<br />total wattage of greater than the secondary or output rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations when rated maximum 30 VDC.
<br />5. These products are not required to be enclosed or protected from the weather in the end product when rated 30 VDC or less.
<br />6. These products may be secured in place in the end product by any means available.
<br />7. When these products are used in applications other than signs or outline lighting, the need to conduct a temperature test shall
<br />be considered.
<br />LED Strips, Cat. No. 701174, 701181 and 701195 with suffix -R, -Y, -A, -B, -W, or -G followed by -1" through -24"
<br />1. These products are only suitable for connection to a UL Listed or Recognized Class 2,24 volt AC power source.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2
<br />voltage and energy limited supplies.
<br />3. These products may be cut into segments through a black mark provided on the printed wiring board. No other cut across the
<br />board is permitted.
<br />4. Cat. No. 701174 is rated for 4.2 watts per foot, Cat. No. 701181 is rated for 9.2 watts per foot and Cat. No. 701195 is rated at
<br />1.5 Watts per foot. The total number of feet of each type and inches for the inch unit are not to produce a total wattage of
<br />greater than 60 watts per Class 2 circuit.
<br />5. These products are suitable for use in dry, damp and wet locations.
<br />6. These products are not required to be enclosed or protected from weather.
|