1202 S Karen Ave - Plan - Laserfiche WebLink

Home Browse Search

HOMEOWNER: DENNIS HOANG PH: 714.588.4468 ADDRESS: 1202 S. KAREN AVENUE SANTA ANA, CA 92704 DATE: 5/2/22DATE: 5/2/22 (&262/$5 86$ (/(&75,&$///& 13962 SEABOARD CIRCLE GARDEN GROVE, CA 92840 PH: 714.265.9077 DAVID Q HOANG C10 - 1045300 6&23(2):25. INSTALL (17) SUNPOWER SPR-X22-360-E-AC SOLAR ELECTRIC MODULES ON THE EXISTING 1ST STORY COMPOSITION ROOF. INSTALL ASSOCIATED MOUNTING HARDWARE, JUNCTION BOXES, CONDUIT, CONDUCTORS AND GROUNDING. INSTALL (1) LOAD CENTER, (1) AC DISCONNECT, AND INSTALL OCPD IN MAIN SERVICE PANEL. SERVICE POINT & UTILITY METERING PV SYSTEM DISCONNECT FOR UTILITY OPERATION CAUTION: POWER TO THIS BUILDING IS ALSO SUPPLIED FROM THE FOLLOWING SOURCES WITH DISCONNECTS AS SHOWN. ADDRESS: 1202 S. KAREN AVENUE, SANTA ANA, CA 92704 SOLAR ARRAY (ON ROOF) N TO BE INSTALLED ON THE OUTSIDE COVER OF THE MAIN SERVICE DISCONNECT: 6+((7 127,&( $1<&+$1*(67225 86(62)7+(6( '2&80(176'5$:,1*6:,7+2877+( :5,77(1&216(172)-(11,)(5 .(00(25 6&277+$55,6$5(675,&7/<352+,%,7(' 2) PLANS PREPARED BY: JENNIFER KEMME PH: 909.748.1300 6<67(0 6,*1$*( ALL SIGNAGE SHALL BE REFLECTIVE, UV RESISTANT PLASTIC, RED IN COLOR WITH WHITE LETTERING, AND ATTACHED WITH WEATHERPROOF ADHESIVE OR OTHER APPROVED METHOD. ALL LETTERS SHALL BE A MINIMUM OF 3 8" HEIGHT AND ALL CAPITALIZED. ALL CONDUIT, JUNCTION BOXES AND OTHER ENCLOSURES SHALL BE MARKED AT 10' MAX INTERVALS AND AT ALL BENDS, TERMINATIONS, SPLICES OR CONNECTIONS WITH "WARNING: PHOTOVOLTAIC POWER SOURCE". WARNING ELECTRIC SHOCK HAZARD DO NOT TOUCH TERMINALS TERMINALS ON BOTH THE LINE AND LOAD SIDES MAY BE ENERGIZED IN THE OPEN POSITION TO BE INSTALLED AT ALL SERVICEABLE PANELS OR BOXES AND AT ALL DISCONNECTS: RAPID SHUTDOWN SWITCH FOR SOLAR PV SYSTEM RATED AC OUTPUT CURRENT = 27.84 A NOMINAL OPERATING AC VOLTAGE = 240 V TO BE INSTALLED NEXT TO THE SOLAR BREAKER: TURN RAPID SHUTDOWN SWITCH TO THE "OFF" POSITION TO SHUT DOWN PV SYSTEM AND REDUCE SHOCK HAZARD IN THE ARRAY SOLAR ELECTRIC PV PANELS SOLAR PV SYSTEM EQUIPPED WITH RAPID SHUTDOWN TO BE INSTALLED ON THE FRONT OF THE MAIN SERVICE DISCONNECT: "SOLAR PV SYSTEM EQUIPPED WITH RAPID SHUTDOWN" SHALL BE BLACK LETTERING ON YELLOW BACKGROUND. THE REMAINDER OF THE SIGN SHALL BE BLACK LETTERING ON WHITE BACKGROUND. 6<67(0 &$/&8/$7,216 NUMBER OF MODULES IN EACH CIRCUIT = 9 MODULE MAX OUTPUT CURRENT = 1.31 A (9) (1.31 A) (1.25) = 14.74 A [Ic], USE 15 A BREAKERS TOTAL NUMBER OF MODULES = 17 (17) (1.31 A) (1.25) = 27.84 A [I], USE 30 A BREAKER MAIN SERVICE PANEL BUS RATING = 125 A MAIN SERVICE PANEL MAIN OCPD = 100 A 100 A + 30 A SOLAR OCPD = 130 A 125 A BUS (1.2) = 150 A 130 A < 150 A, OK :,5(&$/&8/$7,216 FROM THE MODULES TO THE LOAD CENTER: AMBIENT TEMPERATURE = 34°C TEMPERATURE ADDER FOR CONDUIT NOT OFFSET FROM ROOF = 33°C ADJUSTMENT FACTOR PER TABLE 310.15(B)(2)(a) FOR 90°C INSULATED CONDUCTOR AT 34°C + 33°C = 67°C = 0.58 Ic = 14.96 A 14.96 A/0.58 = 25.79 A NUMBER OF CURRENT CARRYING CONDUCTORS IN CONDUIT = 4 ADJUSTMENT FACTOR PER TABLE 310.15(B)(3)(a) FOR CONDUIT FILL (4-6 CONDUCTORS IN CONDUIT) = 0.80 25.79 A/0.80 = 33.24 A SELECT WIRE SIZE WITH AMPACITY GREATER THAN 33.24 A, USE 10 AWG THWN-2 COPPER WIRE WITH AN AMPACITY OF 40 A SELECT CONDUIT FOR (4) 10 AWG THWN-2 & (1) 10 AWG GROUND = 3 4" EMT CONDUIT FROM THE LOAD CENTER TO THE MAIN SERVICE PANEL: ADJUSTMENT FACTOR PER TABLE 310.15(B)(2)(a) FOR 90°C INSULATED CONDUCTOR AT 42°C = 0.96 I = 27.84 A 27.84 A/0.96 = 29.00 A SELECT WIRE SIZE WITH AMPACITY GREATER THAN 29.00 A, USE 10 AWG THWN-2 COPPER WIRE WITH AN AMPACITY OF 40 A SELECT CONDUIT FOR (3) 10 AWG THWN-2 & (1) 10 AWG GROUND = 3 4" EMT CONDUIT 1202 S Karen Ave 06/29/22