My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
1410 W Elder Avenue - Plan
PBA
>
Building
>
ProjectDox
>
E
>
Elder Ave
>
1410 W Elder Ave
>
1410 W Elder Avenue - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
5/30/2025 1:34:16 PM
Creation date
5/30/2025 8:00:48 AM
Metadata
Fields
Template:
Plan
Permit Number
101111034
Full Address
1410 W Elder Ave
Permit Number (Not in SAPIN)
2017667
Document Relationships
101111034 - Permit
(Permit - Plan)
Path:
\Building\Permits\E\Elder Ave\1410 W Elder Ave
Text box
ID:
1
Creator:
Import Agent
Created:
5/30/2025 10:00 AM
Modified:
5/30/2025 8:01 AM
Text:
http://www.vectorse.com
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
42
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
VSE Project Number: U1932.3419.211 <br />September 24, 2021 <br />Bright Planet Solar <br />ATTENTION: Mikey Heinz <br />103A Millbury St. <br />Auburn, MA 01501 <br />REFERENCE: Aguilar, Clemente Residence: 1410 West Elder Avenue, Santa Ana, CA 92704 <br />Bright Planet Solar Project: BPS134932 <br />Solar Array Installation <br />To Whom It May Concern: <br />Per your request, we have reviewed the existing structure at the above referenced site. The purpose of our review was to <br />determine the adequacy of the existing structure to support the proposed installation of solar panels on the roof as shown on <br />the panel layout plan. <br />Based upon our review, we conclude that the existing structure is adequate to support the proposed solar panel installation. <br />Design Parameters <br />Code: California Building Code, 2019 Edition (2018 IBC) <br />Risk Category: II <br />Design wind speed, Vult: 95 mph (3-sec gust) per ASCE 7-16 <br />Wind exposure category: C <br />Seismic design category: D <br />Existing Roof Structure <br />Roof structure: 2x6 rafters @ 24" o.c. <br />Roofing material: composite shingles <br />Roof pitch: 1:12 <br />Connection to Roof <br />Mounting connection: (1) 5/16" lag screw w/ min. 2.5" threaded embedment into framing at max. 48" o.c. along rails <br />(2) rails per row of panels, evenly spaced; panel length perpendicular to the rails not to exceed 72.5 in. Rail cantilever shall <br />not exceed 50% of connection spacing. <br />Conclusions <br />Based upon our review, we conclude that the existing structure is adequate to support the proposed solar panel installation. <br />In the area of the solar array, other live loads will not be present or will be greatly reduced (2019 CBC, Section 1607.13.5). <br />The gravity loads, and thus the stresses of the structural elements, in the area of the solar array are either decreased or <br />increased by no more than 5%. Therefore, the requirements of Section 503.3 of the 2019 CEBC are met and the structure is <br />permitted to remain unaltered. <br />651 W. Galena Park Blvd., Ste. 101 / Draper, UT 84020 / T (801) 990-1775 / F (801) 990-1776 / www.vectorse.com <br />1410 W Elder <br />Avenue07/26/22
The URL can be used to link to this page
Your browser does not support the video tag.