Laserfiche WebLink
1. No enforced DC/AC ratio. See the compatibility calculator at https://enphase.com/en-us/support/module-compatibility. <br />2. Nominal voltage range can be extended beyond nominal if required by the utility. <br />3. Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area. <br />To learn more about Enphase offerings, visit enphase.com <br />© 2020 Enphase Energy. All rights reserved. Enphase, the Enphase logo, Enphase IQ 7, Enphase IQ 7+, Enphase IQ Battery, <br />Enphase Enlighten, Enphase IQ Envoy, and other trademarks or service names are the trademarks of Enphase Energy, Inc. Data subject to change. 2020-08-12 <br />INPUT DATA (DC) IQ7-60-2-US IQ7PLUS-72-2-US <br />Commonly used module pairings¹ 235 W - 350 W + 235 W - 440 W + <br />Module compatibility 60-cell/120 half-cell PV modules <br />only <br />60-cell/120 half-cell and 72- <br />cell/144 half-cell PV modules <br />Maximum input DC voltage 48 V 60 V <br />Peak power tracking voltage 27 V - 37 V 27 V - 45 V <br />Operating range 16 V - 48 V 16 V - 60 V <br />Min/Max start voltage 22 V / 48 V 22 V / 60 V <br />Max DC short circuit current (module Isc) 15 A 15 A <br />Overvoltage class DC port II II <br />DC port backfeed current 0 A 0 A <br />PV array configuration 1 x 1 ungrounded array; No additional DC side protection required; <br />AC side protection requires max 20A per branch circuit <br />OUTPUT DATA (AC) IQ 7 Microinverter IQ 7+ Microinverter <br />Peak output power 250 VA 295 VA <br />Maximum continuous output power 240 VA 290 VA <br />Nominal (L-L) voltage/range² 240 V / <br />211-264 V <br />208 V / <br />183-229 V <br />240 V / <br />211-264 V <br />208 V / <br />183-229 V <br />Maximum continuous output current 1.0 A (240 V) 1.15 A (208 V) 1.21 A (240 V) 1.39 A (208 V) <br />Nominal frequency 60 Hz 60 Hz <br />Extended frequency range 47 - 68 Hz 47 - 68 Hz <br />AC short circuit fault current over 3 cycles 5.8 Arms 5.8 Arms <br />Maximum units per 20 A (L-L) branch circuit³ 16 (240 VAC) 13 (208 VAC) 13 (240 VAC) 11 (208 VAC) <br />Overvoltage class AC port III III <br />AC port backfeed current 18 mA 18 mA <br />Power factor setting 1.0 1.0 <br />Power factor (adjustable) 0.85 leading ... 0.85 lagging 0.85 leading ... 0.85 lagging <br />EFFICIENCY @240 V @208 V @240 V @208 V <br />Peak efficiency 97.6 % 97.6 % 97.5 % 97.3 % <br />CEC weighted efficiency 97.0 % 97.0 % 97.0 % 97.0 % <br />MECHANICAL DATA <br />Ambient temperature range -40ºC to +65ºC <br />Relative humidity range 4% to 100% (condensing) <br />Connector type MC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter) <br />Dimensions (HxWxD) 212 mm x 175 mm x 30.2 mm (without bracket) <br />Weight 1.08 kg (2.38 lbs) <br />Cooling Natural convection - No fans <br />Approved for wet locations Yes <br />Pollution degree PD3 <br />Enclosure Class II double-insulated, corrosion resistant polymeric enclosure <br />Environmental category / UV exposure rating NEMA Type 6 / outdoor <br />FEATURES <br />Communication Power Line Communication (PLC) <br />Monitoring Enlighten Manager and MyEnlighten monitoring options. <br />Both options require installation of an Enphase IQ Envoy. <br />Disconnecting means The AC and DC connectors have been evaluated and approved by UL for use as the load-break <br />disconnect required by NEC 690. <br />Compliance CA Rule 21 (UL 1741-SA) <br />UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B, <br />CAN/CSA-C22.2 NO. 107.1-01 <br />This product is UL Listed as PV Rapid Shut Down Equipment and conforms with NEC 2014, NEC <br />2017, and NEC 2020 section 690.12 and C22.1-2015 Rule 64-218 Rapid Shutdown of PV Systems, <br />for AC and DC conductors, when installed according manufacturer’s instructions. <br />Enphase IQ 7 and IQ 7+ Microinverters <br />1911 1%2 N. <br />Spurgeon Street01/05/22