Laserfiche WebLink
8/26/22, 4:22 PM ATC Hazards by Location <br />https://hazards.atcouncil.org/#/wind?lat=33.72197999999999&lng=-117.8902733&address=2026 S Rene Drive%2C Santa Ana%2C CA 92704 1/1 <br /> This is a beta release of the new ATC Hazards by Location website. Please contact us with feedback. <br /> The ATC Hazards by Location website will not be updated to support ASCE 7-22. Find out why. <br />Hazards by Location <br />Search Information <br />Address:2026 S Rene Drive, Santa Ana, CA 92704 <br />Coordinates:33.72197999999999, -117.8902733 <br />Elevation:54 ft <br />Timestamp:2022-08-26T23:22:11.339Z <br />Hazard Type:Wind <br />ASCE 7-16 <br />MRI 10-Year 66 mph <br />MRI 25-Year 71 mph <br />MRI 50-Year 77 mph <br />MRI 100-Year 81 mph <br />Risk Category I 89 mph <br />Risk Category II 95 mph <br />Risk Category III 102 mph <br />Risk Category IV 106 mph <br />ASCE 7-10 <br />MRI 10-Year 72 mph <br />MRI 25-Year 79 mph <br />MRI 50-Year 85 mph <br />MRI 100-Year 91 mph <br />Risk Category I 100 mph <br />Risk Category II 110 mph <br />Risk Category III-IV 115 mph <br />ASCE 7-05 <br />ASCE 7-05 Wind Speed 85 mph <br />The results indicated here DO NOT reflect any state or local amendments to the values or any delineation lines made during the building code adoption process. Users should confirm any <br />output obtained from this tool with the local Authority Having Jurisdiction before proceeding with design. <br />Please note that the ATC Hazards by Location website will not be updated to support ASCE 7-22. Find out why. <br />Disclaimer <br />Hazard loads are interpolated from data provided in ASCE 7 and rounded up to the nearest whole integer. Per ASCE 7, islands and coastal areas outside the last contour should use the <br />last wind speed contour of the coastal area – in some cases, this website will extrapolate past the last wind speed contour and therefore, provide a wind speed that is slightly higher. NOTE: <br />For queries near wind-borne debris region boundaries, the resulting determination is sensitive to rounding which may affect whether or not it is considered to be within a wind-borne debris <br />region. <br />Mountainous terrain, gorges, ocean promontories, and special wind regions shall be examined for unusual wind conditions. <br />While the information presented on this website is believed to be correct, ATC and its sponsors and contributors assume no responsibility or liability for its accuracy. The material presented <br />in the report should not be used or relied upon for any specific application without competent examination and verification of its accuracy, suitability and applicability by engineers or other <br />licensed professionals. ATC does not intend that the use of this information replace the sound judgment of such competent professionals, having experience and knowledge in the field of <br />practice, nor to substitute for the standard of care required of such professionals in interpreting and applying the results of the report provided by this website. Users of the information from <br />this website assume all liability arising from such use. Use of the output of this website does not imply approval by the governing building code bodies responsible for building code approval <br />and interpretation for the building site described by latitude/longitude location in the report. <br />54 ft <br />Map data ©2022 Google, INEGI Report a map error <br />2026 S Rene Dr <br />10/26/22