|
1
<br />1
<br />1
<br />1
<br />EXIST
<br />AA
<br />2
<br />EXIST
<br />AA
<br />2
<br />EXIST
<br />AA
<br />2
<br />EXIST
<br />AA
<br />2
<br />EXIST
<br />AA
<br />2
<br />EXIST
<br />AA
<br />2
<br />EXIST
<br />AA
<br />2
<br />EXIST
<br />AA
<br />2
<br />EXIST
<br />AA
<br />2
<br />EXIST
<br />AA
<br />2
<br />EXIST
<br />AA
<br />2
<br />3
<br />NEW
<br />C EXIST
<br />DD
<br />4
<br />EXIST
<br />DD
<br />4
<br />EXIST
<br />DD
<br />4
<br />EXIST
<br />DD
<br />48
<br />EF
<br />8
<br />EF
<br />7
<br />A
<br />RELO
<br />5
<br />EXIST
<br />B B
<br />EXIST
<br />5
<br />DD
<br />EXIST
<br />4
<br />6
<br />6
<br />4
<br />RELO
<br />A
<br />7
<br />EM
<br />S
<br />S SENSOR
<br />UNIT 1
<br />UNIT 1
<br />UNIT 2
<br />UNIT 3
<br />UNIT 4
<br />S SENSOR
<br />UNIT 2
<br />S SENSOR
<br />UNIT 4
<br />S SENSOR
<br />UNIT 3
<br />SS SENSOR
<br />UNIT 4
<br />SUPPLY
<br />SS SUPPLY
<br />UNIT 2
<br />SENSOR
<br />SS SUPPLY
<br />UNIT 1
<br />SENSOR
<br />UNIT 3
<br />SENSOR
<br />SUPPLY
<br />SS
<br />9
<br />10
<br />10
<br />10
<br />10
<br />11
<br />11
<br />11
<br />11
<br />08/04/22
<br />NEW WORK
<br />EXISTING
<br />NEW TO EXISTING CONNECTIONN
<br />E
<br />LEGEND
<br />SHEET NUMBER
<br />RE
<br />V
<br />I
<br />S
<br />I
<br />O
<br />N
<br />S
<br />SH
<br />E
<br />E
<br />T
<br />
<br />M
<br />A
<br />N
<br />A
<br />G
<br />M
<br />E
<br />N
<br />T
<br />PR
<br />O
<br />J
<br />E
<br />C
<br />T
<br />
<br />I
<br />N
<br />F
<br />O
<br />R
<br />M
<br />A
<br />T
<br />I
<br />O
<br />N
<br />PR
<br />O
<br />J
<br />E
<br />C
<br />T
<br />
<br />N
<br />O
<br />.
<br />:
<br />DA
<br />T
<br />E
<br />
<br />I
<br />S
<br />S
<br />U
<br />E
<br />D
<br />:
<br />DR
<br />A
<br />W
<br />N
<br />
<br />B
<br />Y
<br />:
<br />RE
<br />V
<br />I
<br />E
<br />W
<br />E
<br />D
<br />
<br />B
<br />Y
<br />:
<br />SEAL
<br />Corporate Office:
<br />3025 Highland Parkway | Suite 850
<br />Downers Grove, IL 60515
<br />info@sevansolutions.com
<br />www.sevansolutions.com
<br />INTEGRITY | RESPECT | TEAMWORK
<br />EXCELLENCE | CHARITY
<br />DESIGN SOLUTIONS, P.C.
<br />27
<br />0
<br />0
<br />
<br />M
<br />I
<br />L
<br />A
<br />N
<br />
<br />C
<br />O
<br />U
<br />R
<br />T
<br />,
<br />
<br />B
<br />I
<br />R
<br />M
<br />I
<br />N
<br />G
<br />H
<br />A
<br />M
<br />,
<br />
<br />A
<br />L
<br />
<br />3
<br />5
<br />2
<br />1
<br />1
<br />CO
<br />N
<br />T
<br />A
<br />C
<br />T
<br />
<br />H
<br />I
<br />B
<br />B
<br />E
<br />T
<br />T
<br />
<br />C
<br />O
<br />N
<br />S
<br />T
<br />R
<br />U
<br />C
<br />T
<br />I
<br />O
<br />N
<br />
<br />D
<br />E
<br />P
<br />A
<br />R
<br />T
<br />M
<br />E
<br />N
<br />T
<br />@
<br />(
<br />2
<br />0
<br />5
<br />)
<br />
<br />9
<br />4
<br />2
<br />-
<br />4
<br />2
<br />9
<br />2
<br />1
<br />5
<br />4
<br />0
<br />07
<br />/
<br />0
<br />1
<br />/
<br />2
<br />2
<br />GR
<br />S
<br />NO
<br />.
<br />DA
<br />T
<br />E
<br />DE
<br />S
<br />C
<br />R
<br />I
<br />P
<br />T
<br />I
<br />O
<br />N
<br />-
<br />-
<br />-
<br />-
<br />-
<br />-
<br />-
<br />-
<br />-
<br />22
<br />0
<br />5
<br />8
<br />0
<br />SE
<br />
<br />J
<br />O
<br />B
<br />#
<br />:
<br />New York Omaha HonoluluMiami Los Angeles Seattle
<br />SA
<br />N
<br />T
<br />A
<br />
<br />A
<br />N
<br />A
<br />,
<br />
<br />C
<br />A
<br />
<br />9
<br />2
<br />7
<br />0
<br />5
<br />21
<br />3
<br />0
<br />
<br />E
<br />
<br />1
<br />7
<br />T
<br />H
<br />
<br />S
<br />T
<br />.
<br />-
<br />-
<br />-
<br />-
<br />-
<br />-
<br />ME
<br />C
<br />H
<br />A
<br />N
<br />I
<br />C
<br />A
<br />L
<br />
<br />P
<br />L
<br />A
<br />N
<br />M1.0
<br />PM
<br />P
<br />AN
<br />D
<br />
<br />S
<br />C
<br />H
<br />E
<br />D
<br />U
<br />L
<br />E
<br />S
<br />HIBBETT ENERGY MANAGEMENT SYSTEM (EMS) INFO:
<br />MECHANICAL SPECIFICATIONS
<br />CONTRACTOR'S NOTES:
<br />HVAC SYMBOLS LEGENDAIR DEVICE SCHEDULE
<br />FIRE SUPPRESSION, DETECTION, & NOTIFICATION NOTE:
<br />DUCTWORK GUIDELINES:
<br />HIBBETT EMS CONTROL DRAWINGS AND COMMISSIONING:
<br />4
<br />2
<br />3
<br />5
<br />6
<br />1 EXISTING HVAC UNITS TO REMAIN. CLEAN AND REPAIR EXISTING SUPPLY & RETURN EQUIPMENT TO LIKE NEW CONDITION. CONTACT HIBBETT SPORTS CONSTRUCTION
<br />DEPARTMENT WITH QUESTIONS REGARDING HVAC SYSTEM. M.C. IS TO COORDINATE ALL INSTALLATIONS AND CONNECTIONS WITH THE ELECTRICAL CONTRACTOR. IF HVAC
<br />UNITS ARE TO BE NEW, SEE SHEET M2.0 FOR NEW EQUIPMENT SPECIFICATIONS AND CONTACT INFORMATION. IF UNITS ARE EXISTING, LANDLORD IS TO PROVIDE
<br />SPECIFICATIONS OF EXISTING UNITS TO HIBBETT SPORTS CONSTRUCTION DEPARTMENT.
<br />EXISTING 24" X 24" SUPPLY AIR DIFFUSER TO REMAIN. CLEAN AND REPAIR TO LIKE NEW CONDITION.
<br />NEW METALAIRE 12X12 DIFFUSER 5800-A-1 FOR GYPSUM BOARD CEILING. INSTALL PER PLAN LOCATIONS & CONNECT TO NEW DUCTWORK.
<br />EXISTING RETURN AIR GRILLE TO BE RELOCATED. CLEAN AND REPAIR TO LIKE NEW CONDITION.
<br />EXISTING EXPOSED SPRIAL DUCTWORK AND DUCT MOUNTED DIFFUSERS TO REMAIN. CLEAN AND REPAIR TO LIKE NEW CONDITION.
<br />SS
<br />S
<br />EMS
<br />S
<br />11 -- 1, 2, 3DIF VERIFY VERIFY 24" x 24" EXISTING AA
<br />4 WHITE 2RAG --VERIFY24" x 24" EXISTING DD
<br />INSTRUCTIONS PROVIDED IN THE CONTROLS INSTALLATION PACKAGE SUPERSEDE THESE DOCUMENTS. THEY CONTAIN THE
<br />LATEST INFORMATION CONCERNING THE CORRECT INSTALLATION AND COMMISSIONING OF THIS SYSTEM.
<br />G.C. SHALL CONTACT JAKE MARSHALL SERVICE AND SETUP TIME TO COMMISSION SYSTEM (AS NOTED IN EMS INFO SECTION ON
<br />THIS SHEET) PRIOR TO TURNOVER. ANY SERVICE CALLS OR ADDITIONAL COST INCURRED DUE TO NOT FOLLOWING THESE
<br />CONTROL DRAWINGS AND COMMISSIONING PROCEDURE WILL BE THE RESPONSIBILITY OF THE INSTALLING CONTRACTOR
<br />AND/OR GENERAL CONTRACTOR.
<br />HIBBETT GENERAL CONTRACTOR SHALL NOT BE PAID FINAL 10 % OF CONTRACT AMOUNT UNTIL COMMISSIONING PROCEDURE
<br />AND CHECK-OFF BY JAKE MARSHALL SERVICE HAS BEEN COMPLETED.
<br />HEATER ROOM SENSOR
<br />· ALL DUCTWORK, BOTH NEW AND EXISTING, SHALL BE REQUIRED TO FOLLOW SMACNA HVAC DUCT CONSTRUCTION
<br />STANDARDS AND COMPLY WITH ALL FEDERAL, STATE, AND LOCAL CODES.
<br />· IF FIBROUS GLASS HVAC DUCTWORK (“DUCT BOARD”) IS EXISTING WITHIN THE TENANT'S SPACE, THE SYSTEM SHALL BE
<br />REQUIRED TO FOLLOW SMACNA HVAC FIBROUS GLASS DUCT CONSTRUCTION STANDARDS AND COMPLY WITH ALL FEDERAL,
<br />STATE, AND LOCAL CODES.
<br />EMS ON PHONE BOARD
<br />· EXISTING SPRINKLER SYSTEM MUST BE INSTALLED AS INDICATED TO NEW CEILING LEVEL AND ALTERED
<br />TO PROVIDE CONVERGES AS REQUIRED BY NFPA 13.
<br />· IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO OBTAIN ANY PERMITS, SHOP DRAWINGS, OR OTHER
<br />SUBMITTAL INFORMATION REQUIRED BY ANY AUTHORITIES HAVING JURISDICTION FOR ANY FIRE
<br />SUPPRESSION, DETECTION & NOTIFICATION WORK. THE CONTRACTOR MAY BE REQUIRED TO OBTAIN
<br />LICENSED SUBCONTRACTORS AS REQUIRED TO PERFORM THE WORK.
<br />0
<br />1
<br />2
<br />2
<br />WHITE 2RAG --VERIFY24" x 24" RP-6D
<br />WHITE 1, 2, 3DIF VERIFY VERIFY 12" x 12" 5800A-1 C
<br />DIF VERIFY 12" x 12" B
<br />WHITE
<br />COLOR
<br />1, 2, 3DIF VERIFY VERIFY 24" x 24" RELOCATED A
<br />REMARKSTYPE FLEX
<br />SIZE
<br />NECK
<br />SIZE
<br />FACE
<br />SIZE
<br />*METALAIRE
<br />MODEL NO.QTY MARK
<br />NOTES:
<br />1. PROVIDE SQUARE NECK TO ROUND ADAPTER AS REQUIRED
<br />2. FRAME SHALL FIT LAY-IN CEILING MODULE
<br />3. PROVIDE & INSTALL MANUAL VOLUME DAMPER
<br />* OR APPROVED EQUAL
<br />CEILING MOUNTED
<br />ROOM SENSOR
<br />HVAC HARDWIRING
<br />SUPPLY SENSOR
<br />TOILET ROOM
<br />EXHAUST FAN (EF)
<br />NEW / EXISTING /
<br />RELOCATED
<br />--
<br />- AIR DEVICE TYPE
<br />CEILING MOUNTED
<br />HEATER
<br />ROOF TOP UNIT
<br />(RTU)
<br />RETURN AIR GRILLE
<br />(RAG)
<br />SUPPLY AIR DIFFUSER
<br />(DIF)
<br />· ALL OF THE MECHANICAL WORK IS NOT NECESSARILY SHOWN OR NOTED ON THESE DRAWINGS. THE CONTRACTORS SHALL
<br />VISIT THE JOB SITE AND VERIFY ALL EXISTING CONDITIONS RELATED TO THE WORK PRIOR TO BIDDING. THOSE ITEMS NOT
<br />SHOWN OR NOTED, BUT ARE DEEMED NECESSARY FOR REMOVAL OR RELOCATION BY THE OWNER OR HIS REPRESENTATIVE,
<br />SHALL BE PART OF THIS CONTRACT. THE SUBMISSION OF THE PROPOSALS SHALL BE CONSIDERED AS EVIDENCE THAT THE
<br />CONTRACTORS HAVE VISITED THE SITE. NO EXTRA PAYMENTS WILL BE ALLOWED, DUE TO EXTRA WORK MADE NECESSARY
<br />BY THE CONTRACTOR'S FAILURE TO VISIT THE JOB SITE.
<br />· MECHANICAL CONTRACTOR IS TO COORDINATE ALL WORK WITH OTHER TRADES INVOLVED.
<br />· NOTIFY HIBBETT SPORTS CONSTRUCTION DEPARTMENT (1-205-942-4292) PRIOR TO THE INSTALLATION OF THE ENERGY
<br />MANAGEMENT SYSTEM SENSOR(S). FAILURE TO CALL HIBBETT CONST. DEPT. PRIOR TO PLACEMENT, CAUSING RELOCATION,
<br />SHALL BE AT THE MECHANICAL CONTRACTORS EXPENSE.
<br />· DO NOT ATTACH ANYTHING TO UPPER LEVEL SLAB OR ROOF DECK.
<br />· MECHANICAL CONTRACTOR IS TO INSTALL 18/2 PLENUM SHIELDED STRANDED WIRE WHERE REQUIRED BY CODE AND/OR
<br />LOCAL BUILDING AUTHORITIES HAVING JURISDICTION. IT IS THE RESPONSIBILITY OF THE MECHANICAL CONTRACTOR TO
<br />VERIFY WITH ONSITE CONDITIONS AND/OR THE LOCAL BUILDING AUTHORITIES HAVING JURISDICTION TO DETERMINE
<br />WHETHER PLENUM SHIELDED WIRING IS REQUIRED.
<br />· PROVIDE SEISMIC BRACING AND RESTRAINTS FOR MECHANICAL EQUIPMENT AND DUCT WORK PIPING AS REQUIRED FOR
<br />STRUCTURES BUILT IN SEISMIC HAZARD GROUP B. MECHANICAL SYSTEM SUPPORTS SHALL BE DESIGNED AND INSTALLED
<br />FOR THE SEISMIC FORCES IN ACCORDANCE WITH THE BUILDING CODE.
<br />· HVAC CONTRACTOR TO ENSURE THERE IS ADEQUATE DISTRIBUTION OF AIR-CFM'S THROUGHOUT THE ENTIRE LEASED
<br />PREMISES.
<br />· LANDLORD IS RESPONSIBLE FOR HVAC ARCHITECTURAL SHOP DRAWINGS FOR THE ROOFTOP UNITS.
<br />· LANDLORD TO ENSURE ALL HVAC AND SPRINKLER SYSTEMS TO BE INSTALLED AROUND HIBBETT'S LIGHTING LAYOUT. SEE
<br />SHEET A4.0 PRIOR TO INSTALLATION.
<br />MECHANICAL CONTRACTOR IS TO COORDINATE WITH ELECTRICAL CONTRACTOR FOR CONNECTION OF EQUIPMENT,
<br />THERMOSTAT(S), AND SENSOR(S) TO ENERGY MANAGEMENT SYSTEM. CONTACT JAKE MARSHALL SERVICE, INC. WITH ANY
<br />QUESTIONS.
<br />A. IF BUILDING IS EQUIPPED WITH A FIRE SPRINKLER SYSTEM.
<br />REQUIRED ALTERATIONS TO THE SYSTEM ARE TO BE
<br />DESIGNED AND INSTALLED BY A LICENSED SPRINKLER
<br />INSTALLER ACCORDING TO CODE. PROVIDE APPROVED
<br />SPRINKLER DWGS. TO PROPERTY/OPERATIONS MGR.
<br />B. HVAC REQUIREMENTS DURING CONSTRUCTION THE
<br />FOLLOWING IS REQUIRED BY HIBBETT SPORTING GOODS ON
<br />ALL HVAC PREVENTATIVE MAINTENANCE INSPECTIONS.
<br />THESE ITEMS MUST BE PERFORMED AND CHECKED OFF,
<br />NOTING ANY PERTINENT INFORMATION. (i.e., OPERATING
<br />PRESSURES, ETC.)
<br />1. REPLACE DISPOSABLE FILTERS OR CLEAN PERMANENT TYPE
<br />FILTERS.
<br />2. LUBRICATE ALL BEARINGS, PUMPS, FANS AND MOTORS AS
<br />NEEDED.
<br />3. INSPECT FOR LEAKS ON EQUIPMENT AND PIPING.
<br />4. CLEAN AND CHECK CONTROLS ON THERMOSTAT.
<br />5. ADJUST FOR PROPER TENSION ON ALL BELTS AND PULLEYS.
<br />6. INSPECT ALL ELECTRICAL COMPONENTS AND TIGHTEN AS
<br />NECESSARY.
<br />7. CHECK OPERATION PRESSURES OF COMPRESSORS AND OIL
<br />LEVEL IN CRANK CASE.
<br />8. CLEAN OUT CONDENSATION DRAIN PANS AND LINES.
<br />9. ANY NORMAL INSPECTION SERVICE REQUIRED FOR THE
<br />UNIT.
<br />10. LIST EQUIPMENT INFORMATION BELOW:
<br />ENERGY MANAGEMENT SYSTEM PROVIDED BY JAKE MARSHALL SERVICE, INC.
<br />COMMUNICATE HVAC EQUIPMENT INFORMATION TO JAKE MARSHALL SERVICE, INC. DURING INSTALL OF SYSTEM. THERMOSTATS
<br />USED WITHIN SYSTEM FOR HIBBETT SPORTS HAVE SPECIFIC SETTINGS (74 ° A/C & 68 ° HEAT). VERIFY THAT HIBBETT'S SETTINGS
<br />ARE PRESET ON STATS INSTALLED. FAILURE TO DO SO WILL RESULT IN RE-INSTALLATION AT RESPONSIBLE PARTY'S EXPENSE.
<br />VERIFY THERMOSTATS ARE COMPATIBLE WITH EXISTING HVAC UNITS; OTHERWISE, INSTALL INTERFACE EQUIPMENT AS
<br />NECESSARY.
<br />SUPPORT CONTACT: DREW DANIEL WITH JAKE MARSHALL SERVICE, INC. @ OFFICE (423) 266-7200
<br />EMAIL: DDANIEL@JMSERVICE.COM
<br />TECHNICAL SUPPORT CONTACT: NICK WORKMAN WITH JAKE MARSHALL SERVICE, INC. @ OFFICE: (423) 266-7200
<br />EMAIL: NWORKMAN@JMSERVICE.COM
<br />* AFTER INSTALLATION IS COMPLETE, G.C. MUST CONTACT THE TECHNICAL SUPPORT NUMBER ABOVE TO CONFIRM CONTROLS
<br />OPERATION. PLEASE SCHEDULE AT LEAST 24 HOURS IN ADVANCE. ASSISTANCE WILL BE AVAILABLE MONDAY - FRIDAY, 8AM TO
<br />4PM, EASTERN TIME UNLESS OTHERWISE SCHEDULED.
<br />HVAC KEYED NOTES
<br />MECHANICAL PLAN
<br />M1.0 3/16" = 1'-0"SCALE:
<br />1
<br />EXISTING 24" X 24" SUPPLY AIR DIFFUSER TO BE RELOCATED. CLEAN AND REPAIR TO LIKE NEW CONDITION. RELOCATE TO NEW LOCATION SHOWN ON PLANS.7
<br />EXISTING RESTROOM EXHAUST FAN TO REMAIN.8
<br />ENERGY MANAGEMENT SYSTEM PROVIDED BY JAKE MARSHALL SERVICE, INC.
<br />COMMUNICATE HVAC EQUIPMENT INFORMATION TO JAKE MARSHALL SERVICE, INC. DURING INSTALL OF SYSTEM. THERMOSTATS
<br />USED WITHIN SYSTEM FOR HIBBETT SPORTS HAVE SPECIFIC SETTINGS (74° A/C & 68° HEAT). VERIFY THAT HIBBETT'S SETTINGS ARE
<br />PRESET ON STATS INSTALLED. FAILURE TO DO SO WILL RESULT IN RE-INSTALLATION AT RESPONSIBLE PARTY'S EXPENSE. VERIFY
<br />THERMOSTATS ARE COMPATIBLE WITH EXISTING HVAC UNITS; OTHERWISE, INSTALL INTERFACE EQUIPMENT AS NECESSARY.
<br />SUPPORT CONTACT: DREW DANIEL WITH JAKE MARSHALL SERVICE, INC. @ OFFICE (423) 266-7200
<br />EMAIL: DDANIEL@JMSERVICE.COM
<br />TECHNICAL SUPPORT CONTACT: NICK WORKMAN WITH JAKE MARSHALL SERVICE, INC. @ OFFICE: (423) 266-7200
<br />EMAIL: NWORKMAN@JMSERVICE.COM
<br />* AFTER INSTALLATION IS COMPLETE, G.C. MUST CONTACT THE TECHNICAL SUPPORT NUMBER ABOVE TO CONFIRM CONTROLS
<br />OPERATION. PLEASE SCHEDULE AT LEAST 24 HOURS IN ADVANCE. ASSISTANCE WILL BE AVAILABLE MONDAY - FRIDAY, 8AM TO
<br />4PM, EASTERN TIME UNLESS OTHERWISE SCHEDULED.
<br />HIBBETT ENERGY MANAGEMENT SYSTEM (EMS) INFO:
<br />·
<br />·
<br />·
<br />·
<br />EXISTING -- VERIFY 1, 2, 3
<br />EXISTING 12" X 12" SUPPLY AIR DIFFUSER TO REMAIN. CLEAN AND REPAIR TO LIKE NEW CONDITION.
<br />TELEPHONE BACKBOARD ELEVATION 4/E4.0.
<br />CONNECTIONS AND DETAILS ON SHEET M2.0. EMS IS TO BE INSTALLED NEAR ELECTRICAL PANEL IN THE STOCK AREA ON PHONE BOARD. SEE DETAIL 1/M2.0 AND SEE
<br />MECHANICAL CONTRACOR IS TO PROVIDE AND INSTALL ALL NEW HVAC WIRING CONNECTIONS WITHIN ENERGY MANAGEMENT SYSTEM (EMS) TO UNIT(S) AND SENSORS. SEE9
<br />10 MECHANICAL CONTRACTOR IS TO INSTALL NEW EMS ROOM TEMPERATURE SENSOR(S) AND CONNECT TO JOHNSON CONTROLS (JCI) TEC3630-00-000 THERMOSTAT(S).
<br />MOUNT IN CEILING TILE, SEE MECHANICAL PLAN FOR GENERAL LOCATION. VERIFY FINAL LOCATION OF SENSORS WITH HIBBETT SPORTS CONSTRUCTION DEPARTMENT
<br />PRIOR TO INSTALLATION. SENSORS ARE TO BE CONNECTED VIA NEW 18/2 SHIELDED STRANDED WIRE. SEE SHEET M2.0 FOR WIRING DETAILS.
<br />MECHANICAL CONTRACTOR IS TO INSTALL NEW EMS DUCT SENSOR(S) WITHIN SUPPLY DUCT PER MANUFACTURER'S RECOMMENDATIONS. CONNECT SENSOR TO JOHNSON
<br />CONTROLS (JCI) TEC3630-00-000 THERMOSTAT(S). DUCT SENSORS ARE TO BE CONNECTED VIA NEW 18/2 SHIELDED STRANDED WIRE. SEE SHEET M2.0 FOR WIRING DETAILS.11
<br />2130 E 17th St -
<br />10111279406/07/23
|