My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2318 Downie Pl - Plan
PBA
>
Building
>
ProjectDox
>
D
>
Downie Pl
>
2318 W Downie Pl
>
2318 Downie Pl - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
5/30/2025 1:41:11 PM
Creation date
5/30/2025 8:00:53 AM
Metadata
Fields
Template:
Plan
Permit Number
20176352
101110679
Full Address
2318 W Downie Pl
Document Relationships
101110679 - Permit
(Permit - Plan)
Path:
\Building\Permits\D\Downie Pl\2318 W Downie Pl
20176352 - Permit
(Permit - Plan)
Path:
\Building\Permits\D\Downie Pl\2318 W Downie Pl
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
33
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
SM SOLAR <br />MOUNT INSTALLATION GUIDE PAGE <br />SYSTEM LEVEL FIRE CLASSIFICATION <br />The system fire class rating requires installation in the manner specified in the SOLARMOUNT Installation Guide. SOLARMOUNT has been classified to the system level <br />fire portion of UL 1703. This UL 1703 classification has been incorporated into our UL 2703 product certification. SOLARMOUNT has achieved system level performance <br />for steep sloped roofs. System level fire performance is inherent in the SOLARMOUNT design, and no additional mitigation measures are required. The fire classification <br />rating is only valid on roof pitches greater than 2:12 (slopes ≥ 2 inches per foot, or 9.5 degrees). The system is to be mounted over fire resistant roof covering rated for <br />the application. There is no required minimum or maximum height limitation above the roof deck to maintain the system fire rating for SOLARMOUNT. Module Types <br />& System Level Fire Ratings are listed below: <br />UL2703 CERTIFICATION MARKING LABEL <br />Unirac SOLARMOUNT is listed to UL 2703. Certification marking is embossed on all mid clamps as shown. <br />Labels with additional information will be provided . After the racking system is fully assembled, a single <br />label should be applied to the SOLARMOUNT rail at the edge of the array. Before applying the label, the <br />corners of the label that do not pertain to the system being installed must be removed so that only the <br />installed system type is showing. <br />Note: The sticker label should be placed such that it is visible, but not outward facing. <br />SM STANDARD RAIL SM LIGHT RAIL <br />CODE COMPLIANCE NOTES <br />Rail Type Module Type System Level Fire Rating Rail Direction Module <br />Orientation <br />Mitigation <br />Required <br />Standard Rail Type 1, Type 2, Type 3 & Type 10 Class A, Class B & Class C East-West Landscape OR Portrait None Required <br />North-South Landscape OR Portrait None Required <br />Light Rail Type 1 & Type 2 Class A, Class B & Class C East-West Landscape OR Portrait None Required <br />North-South Landscape OR Portrait None Required <br />C <br />This racking system may be used to ground and/or mount a PV module complying with UL1703 only when the specific module has been evaluated for <br />grounding and/or mounting in compliance with the included instructions. <br />2318 Downie Pl <br />06/07/22
The URL can be used to link to this page
Your browser does not support the video tag.