My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
2333 S Evergreen St - Plan
PBA
>
Building
>
ProjectDox
>
E
>
Evergreen St
>
2333 S Evergreen St
>
2333 S Evergreen St - Plan
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
5/30/2025 1:41:54 PM
Creation date
5/30/2025 8:00:53 AM
Metadata
Fields
Template:
Plan
Permit Number
20177435
101112091
Full Address
2333 S Evergreen St
Document Relationships
101112091 - Permit
(Permit - Plan)
Path:
\Building\Permits\E\Evergreen St\2333 S Evergreen St
20177435 - Permit
(Permit - Plan)
Path:
\Building\Permits\E\Evergreen St\2333 S Evergreen St
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
23
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
McPherson Engineering By: L.Z. <br />Date: 8/29/22 <br />Rooftop Solar Panels Wind Pressures (Section 29.4, ASCE 7-16) <br />Vult = 100 mph Kzt = 1.00 (sec 26.8.2) h = 15 ft <br />Exposure Category = B Kz = 0.57 (sec 26.10.1) <br />Roof Zone = 2 Kd = 0.85 (sec 26.6) <br />Roof θ = 7-27 deg Ke = 1.00 (sec 26.9) <br />qh = 0.00256 Kz Kzt Kd Ke V 2 qh = 12.40 (eq. 26.10-1) <br />GPp = -2 uplift γE = 1.5 (sec 29.4.4) <br />γa = 0.71 (fig 29.4-8) <br />γE = 1.5 FIG 29.4-7)γc = 0.94 (fig 29.4-7) hpt = 0 <br />γa = 0.71 (fig 29.4-8)γ p = 0.9 (fig 29.4-7)ω = 0.00 deg (panel tilt) <br />GPp = -2 uplift GCrm = 1.4 uplift <br />p = qh (GPp) γ E γa (eq 29.4-7) p = qh (GCrn) γ E γC γp (eq 29.4-6) <br />p = -26.4 p.s.f.p = 21.9 p.s.f. <br />Check Anchorage to Existing Structure <br />0.6DL - 0.6W controlling load combination (eq. 16-15 for ASD) <br />DL = 2.8 p.s.f.dead load of panel (inlcuding rack system) <br />W = 26.4 p.s.f.wind load normal to face of panel <br />Arealag = 16.8 sq. ft.area tributary to each anchor <br />SPanc = 6.0 ft.spacing of anchors <br />Puplift = Arealag (0.6DL - 0.6W) = 238.0 lbs total uplift on anchor <br />Material = DFL lumber anchor material <br />Dialag = 5/16 in. diameter of screw <br />Penlag = 2.5 in. min. penetration to existing framing <br />Wlag = 266 lb/in. withdrawal load per in. of penetration per NDS Table 11.2A <br />CD = 1.6 load duration factor for wind per NDS Table 2.3.2 <br />Ct = 0.8 temperature factor per NDS Table 2.3.3 <br />Noscrews = 1 number of screws in withdrawal <br />Pallow = Penlag (Wlag CD Ct) * Noscrews = 851.2 lbs total allowable withrawal on anchor <br />Puplift <br />Pallow <br />Anchorage = USE (1) 5/16IN. DIA. LAG SCREW(S) AT 6FT. MAX. O.C. W/ 2.5IN. MIN. PENETRATION <br />0.28 < 1.00 Anchor is OK! <br />Wind Uplift Anchorage <br />= <br />Flush Mounted Panels - ASCE Section <br />29.4.4 (where applicable) <br />Flat Roof Panels - ASCE Section 29.4.3 <br />(where applicable) <br />8/29/2022 12:42 PM <br />6 of 7 <br />©McPherson Engineering <br />2333 Evergreen St <br />- 2017743510/04/22
The URL can be used to link to this page
Your browser does not support the video tag.