Laserfiche WebLink
CONTeNTS <br />FLUSH MOUNT INSTALLATION MANUAL - 1© 2019 IRONRIDGE, INC. VERSION 2.0 <br />DISCLAIMeR 1 <br />RATINGS 2 <br />MARKINGS 2 <br />CHeCKLIST 3 <br />1. ATTACH BASeS 4 <br />2. PLACe RAILS 4 <br />3. SeCURe LUGS 5 <br />4. SeCURe MODULeS 5 <br />CAMO 6 <br />eXPANSION JOINTS 7 <br />eLeCTRICAL DIAGRAM 7 <br />FLASHFOOT2 8 <br />ALL TILe HOOK 8 <br />KNOCKOUT TILe 8 <br />FLAT ROOF ATTACHMeNT 9 <br />eND CAPS 9 <br />WIRe CLIPS 9 <br />FLUSH STANDOFFS 9 <br />MICROINVeRTeR KITS 10 <br />SYSTeMS USING eNPHASe MICROINVeRTeRS OR SUNPOWeR AC MODULeS 10 <br />SYSTeMS USING PHAZR MICROSTORAGe PRODUCTS 10 <br />FRAMeLeSS MODULe KITS 11 <br />MODULe COMPATIBILITY 11 <br />DISCLAIMeR <br />This manual describes proper installation procedures and provides necessary standards required for product reliability. <br />Warranty details are available on website. All installers must thoroughly read this manual and have a clear understanding <br />of the installation procedures prior to installation. Failure to follow these guidelines may result in property damage, bodily <br />injury or even death. <br />IT IS THe INSTALLeR’S ReSPONSIBILITY TO: <br />• Ensure safe installation of all electrical aspects of the array. All electrical installation and procedures should be <br />conducted by a licensed and bonded electrician or solar contractor. Routine maintenance of a module or panel shall <br />not involve breaking or disturbing the bonding path of the system. All work must comply with national, state and local <br />installation procedures, product and safety standards. <br />• Comply with all applicable local or national building and fire codes, including any that may supersede this manual. <br />• Ensure all products are appropriate for the installation, environment, and array under the site’s loading conditions. <br />• Use only IronRidge parts or parts recommended by IronRidge; substituting parts may void any applicable warranty. <br />• Review the Design Assistant and Certification Letters to confirm design specifications. <br />• Ensure provided information is accurate. Issues resulting from inaccurate information are the installer’s responsibility. <br />• Ensure bare copper grounding wire does not contact aluminum and zinc-plated steel components, to prevent risk of <br />galvanic corrosion. <br />• If loose components or loose fasteners are found during periodic inspection, re-tighten immediately. If corrosion is <br />found, replace affected components immediately. <br />• Provide an appropriate method of direct-to-earth grounding according to the latest edition of the National Electrical <br />Code, including NEC 250: Grounding and Bonding, and NEC 690: Solar Photovoltaic Systems. <br />• Disconnect AC power before servicing or removing modules, AC modules, microinverters and power optimizers. <br />• Review module manufacturer’s documentation for compatibility and compliance with warranty terms and conditions. <br />2605 N Westwood <br />Ave08/16/22