|
FLUSH MOUNT INSTALLATION MANUAL - 11© 2019 IRONRIDGE, INC. VERSION 2.0
<br />FRAMeLeSS MODULe KITS
<br />Insert Frameless Kit T-bolt in top rail slot. Place star
<br />washer over T-bolt, allowing it to rest on top of rail. Secure
<br />module clamps with a hex nut and torque to 80 in-lbs.
<br /> í Tested or evaluated module clamps:
<br />• Sunforson silver or black SFS-UTMC-200(B) mid and SFS-
<br />UTEC-200(B) end clamps.
<br />• Sunpreme silver or black mid and end clamps with part
<br />numbers 7500105X where "X" is 1, 5, 6 or 7.
<br />• IronRidge silver or black mid and end clamps with part
<br />numbers FMLS-XC-001-Y where "X" is E or M and "Y" is B or
<br />blank.
<br /> í Follow module manufacturer's installation instructions to install
<br /> the module clamps.
<br /> í Frameless modules require using a Grounding Lug on every rail.
<br /> í For Sunpreme Modules Only: If required to use slide prevention
<br />hardware, see Module Slide Prevention Addendum (Version 1.10).
<br />Place
<br />Star Washer
<br />Module Clamp
<br />(80 in-lbs) Grounding Lugs
<br />Required on Every Rail
<br />MODULe COMPATIBILITY
<br />The Flush Mount System may be used to ground and/or mount a PV module complying with UL 1703 only when the
<br />specific module has been evaluated for grounding and/or mounting in compliance with the included instructions. Unless
<br />otherwise noted, “xxx” refers to the module power rating and both black and silver frames are included in the certification.
<br />MAKe MODeLS
<br />Amerisolar Modules with 35, 40 and 50mm frames and model identifier ASbYxxxZ; where "b" can be 5 or 6; "Y" can
<br />be M, P, M27, P27, M30, or P30; and "Z" can be blank, W or WB.
<br />Astronergy Solar
<br />Modules with 35, 40, and 45mm frames and model identifier aaSM66yyPzz-xxx; where “aa” can be CH
<br />or A; “yy” can be either 10 or 12; and “zz” can be blank, HV, (BF) or (BL). Frameless modules with model
<br />identifier CHSM6610P(DG)-xxx.
<br />Auxin Modules with 40mm frames and model identifier AXN6y6zAxxx; where "y" can be M or P; "z" can be 08,
<br />09, 10, 11, or 12; and "A" can be F or T.
<br />Axitec Modules with 35 and 40mm frames and model identifier AC-xxxY/aa-ZZ; where "Y" can be M or P; "aa"
<br />can be 125 or 156; and "ZZ" can be 54S, 60S or 72S.
<br />Boviet Modules with 40mm frames and model identifier BVM66aaYY-xxx; where "aa" can be 9, 10 or 12; and
<br />"YY" is M or P.
<br />BYD Modules with 35mm frames and model identifier BYDxxxAY-ZZ; where "A" can be M6, P6, or PH; "Y"
<br />can be C or K; and "ZZ" can be 30 or 36.
<br />Canadian Solar
<br />Modules with 30, 35 and 40mm frames and model identifier CSbY-xxxZ; where “b” can be 1, 3 or 6; “Y”
<br />can be H, K, P, U, V, or X; and “Z” can be M, P, MS, PX, M-SD, P-AG, P-SD, MB-AG, PB-AG, MS-AG, or
<br />MS-SD. Frameless modules with model identifier CSbY-xxx-Z; where “b” can be 3 or 6; “Y” is K, P, U, or
<br />X; and “Z” can be M-FG, MS-FG, P-FG, MB-FG, or PB-FG.
<br />CertainTeed Modules with 35 and 40mm frames and model identifier CTxxxYZZ-AA; where "Y" can be M or P; "ZZ"
<br />can be 00,01, 10, or 11; and "AA" can be 01, 02 or 03.
<br />CSUN Modules with 35 and 40mm frames and model identifier YYxxx-zzAbb; where "YY" is CSUN or SST; "zz"
<br />is blank, 60, or 72; "A" is blank, P or M; and "bb" is blank, BB, BW, or ROOF.
<br />Ecosolargy Modules with 35, 40, and 50mm frames and model identifier ECOxxxYzzA-bbD; where "Y" can be A, H,
<br />S, or T; "zz" can be 125 or 156; "A" can be M or P; "bb" can be 60 or 72; and "D" can be blank or B.
<br />ET Solar Modules with 35, 40, or 50mm frames and model identifier ET-Y6ZZxxxAA; where "Y" is P, L, or M; "ZZ"
<br />is 60 or 72; and "AA" is WB, WW, BB, WBG, WWG, WBAC, WBCO, WWCO, WWBCO or BBAC.
<br />2605 N Westwood
<br />Ave08/16/22
|