Laserfiche WebLink
| 1 | <br />ALN440 – Towne Commons® LED TYPE <br />ARCHITECTURAL AREA LIGHTING <br />17760 Rowland Street | City of Industry | CA 91748 <br />P 626.968.5666 | F 626.369.2695 | www.aal.net <br />Copyright © 2014 May 9, 2017 3:09 PM <br />1. LUMI- <br />NAIRE 2. DISTRIBUTION 3. COLOR TEMP 4. DRIVER 5. COLOR 6. OPTIONS 7. CONTROL 8. MOUNTING <br />• Energy Saving LED technology <br />• Reliable effi cient operation <br />• Type 2, 3, 4, 5 distributions <br />• 0-10V dimming ready <br />• LifeShield® protection system <br />• Surge protection included <br />• Wide variety of custom mounting options <br />including post-top, wall mount or pole <br />mount arm <br />• IP66 construction of optical system <br />• Cast aluminum struts <br />• DLC pending <br />1. LUMINAIRE <br />ARM OR POST TOP MOUNT <br />ALN 440 <br />TOP MOUNTED ARM OR PENDANT MOUNT <br />ALN 440D <br />2. DISTRIBUTION <br />Y2 (Type 2) <br />Y3 (Type 3) <br />Y4 (Type 4) <br />Y5 (Type 5) <br />3. COLOR TEMPERATURE <br />32LED-3K (Warm White, 3000K output) <br />32LED-4K (Neutral White, 4000K output) <br />32LED-5K (Bright White, 5000K output) <br />4. DRIVER (120 thru 277 volt) <br />700 (700mA drive current, 75 watts) <br />SPECIFICATIONS <br />HOUSING <br />Luminaire shall be cast A356 alloy aluminum, free of <br />any porosity or cosmetic fi llers. Castings shall be of <br />uniform wall thickness, minimum .188 inch with no <br />warping or mold shifting. <br />The top cap shall hinge open by loosening two <br />captive fasteners. The top shall seal the lamp <br />compartment with a continuous silicone gasket. <br />The lens shall be one-piece clear optical grade <br />acrylic with a one-piece memory retentive silicone <br />gasket on top and bottom. The LED and driver <br />assembly shall be serviceable by backing out three <br />thumb screws to allow for the light engine to be <br />lifted out. Quick disconnects shall be used for all <br />electrical connections. <br />All internal and external hardware shall be stainless <br />steel. <br />OPTICAL MODULE <br />The optical assembly shall be completely sealed <br />with a one piece injection molded silicone gasket to <br />prevent dust, insect or moisture contamination. The <br />optical array shall consist of high brightness light <br />emitting diodes mounted to a printed metal circuit <br />board with precision injection molded optically <br />clear lenses discretely coupled to each individual <br />diode. The printed circuit board assembly shall have <br />a uniform conformal coating with the exception <br />of the optical output lens at each diode and be <br />mechanically fastened to an anodized die-cast <br />aluminum heat sink. Standard color temperatures <br />shall be 3000K, 4000K and 5000K. <br />ELECTRICAL <br />All Luminaires shall accept 120 thru 277 volt input <br />and have integral surge protection. Drivers shall be <br />U.L recognized and have a 0-10v dimming interface <br />with a dimming range of 10-100%. Approved <br />dimmers include Lutron Diva AVTV, Lutron Nova <br />NFTV and NTFTV. (Note: not compatible with <br />current sourcing dimmers). Consult factory for <br />current list of known compatible dimming systems. <br />LifeShield™ shall be provided with all confi gurations <br />for added protection in extreme temperature <br />environments (-30°C to 60°C). The electrical <br />assembly shall be mounted to a serviceable tray. <br />The surge protector shall be U.L. recognized <br />and have a sur ge current rating of 10,000 Amps <br />using the industry standard 8/20uSec wave with a <br />clamping voltage of 320V and surge rating of 372J. <br />ALN440 <br />7. CONTROL <br />PCA-C (Contemporary photocell adapter, not for Wall <br />Mount) <br />PCA-T (Traditional photocell adapter, not for Wall Mount) <br />SCP (Sensor Control Programmable) pole accessory is <br />available to provide occupancy detection for outdoor <br />applications meeting California Title 24. For complete <br />spec sheet and ordering information, visit www.aal.net/ <br />products/sensor_control_programmable/ <br />8. MOUNTING <br />WALL MOUNT <br />ALN440 <br />WMA1M WMA1L WMA3 WMA35U <br />WMA36U WMA55 WMA56 WMA57 <br />WMA7 WMA9U WMA22U <br />ALN440D <br />WMA2M WMA2L WMA37 WMA38 <br />WMA39 WMA4 WMA6 WMA8 <br />WMA9D WMA10 WMA11 WMA12 <br />WMA16 WMA17 WMA18 WMA22D <br />POLE MOUNT <br />Post Top Mount: (Standard) <br />The fi xture shall slip over a 4"/100mm O.D. pole or tenon <br />and be secured to the pole with three (or six) stainless <br />steel set screws. <br />Pole Side Mount (4" O.D. or 5" O.D. side mount) <br />ALN440 <br />TRA1M TRA3 TRA5U TRA55 <br />TRA56 (4” only) TRA57 TRA59U SLA8U <br />SLA22U <br />ALN440D <br />TRA2M TRA2L SLA3 (4” only) SLA8D <br />SLA22D <br />Pole Top Mount Arm <br />ALN440 <br />SLA1 SLA1-2 <br />ALN440D <br />TRA4 TRA7 TRA7-2 TRA8 <br />TRA9 TRA9-2 SLA4 SLA4-2 <br />SLA7 SLA7-2 SLA9 SLA9-2 <br />SLA10 SLA10-2 SLA16 SLA16-2 <br />SLA17 SLA17-2 SLA18 SLA18-2 <br />PIER MOUNT <br />PM1 PM2 PM3 See next page <br />JOB <br />TYPE <br />NOTES <br />Visit www.aal.net for Arms, Poles & Accessories <br />Specification Guide <br />ALN 440 <br />• Available in 3000K, 4000K and 5000K <br />• Powder coat fi nish in 13 standard colors <br />with polymer sealer <br />6. OPTIONS <br />CHM (Glass chimney with polished brass holder) <br />CND (3-lamp candelabra with polished brass holder, <br />lamps included. For decorative use only.) <br />LDL (Lightly diffused lens) <br />SBL (Sandblast diffused lens) <br />HSS-L (House side shield, consists of three field installed <br />panels attached to the inside of the lens. Installing <br />three panels blocks 180° of the lens) <br />MAT (Mast arm adapter slips over a 2 3/8” / 60mm O.D. <br />pipe and is secured with 4 stainless steel set screws. <br />For ALN440D only.) <br /> PMS (Pendant mount with 48” / 1220mm stem and <br />canopy with swivel. For ALN440D only.) <br />PMC (Pendant kit includes canopy and 48” / 1220mm of <br />brass chain painted the fixture color. For ALN440D <br />only.) <br />PT5 (Post top adaptor for a 5”/127mm O.D. pole) <br />5. COLOR <br />WH Arctic White <br />BL Black <br />BLT Matte Black <br />DB Dark Bronze <br />DGN Dark Green <br />TT Titanium <br />WDB Weathered Bronze <br />MDB Bronze Metallic <br />VBU Verde Blue <br />CRT Corten <br />MAL Matte Aluminum <br />MG Medium Grey <br />AGN Antique Green <br />LG Light Grey <br />RAL Premium Color <br />CUSTOM * * Contact Factory <br />UU 1-2 <br />ALN440-Y5-32LED-4K-700-BL-SLA <br />1 <br />GC TO <br />VERIFY <br />AND <br />SPECIFY <br />IF NOT <br />UE <br />GC TO <br />REFERENCE <br />PLANS FOR <br />COLOR <br />DESIGNATION <br />UU 1-2 <br />ALN440-Y5-32LED-4K-700-BL-SLA <br />1 <br />GC TO <br />VERIFY <br />AND <br />SPECIFY <br />IF NOT <br />UE <br />GC TO <br />REFERENCE <br />PLANS FOR <br />COLOR <br />DESIGNATION <br />2020-161485 <br />12/15/20