Laserfiche WebLink
7 Commissioning SMA Solar Technology AG <br />Installation ManualSBxx-1SP-US-41-IA-xx-12 52 <br />7 Commissioning <br />7.1 Commissioning Procedure <br />Commissioning an inverter that is captured in a communication device <br />When the inverter is captured in a communication device, the communication device (e.g. <br />SMA Data Manager) is the unit for configuring the total system. The configuration is <br />transferred to all inverters in the system. The system password assigned via the communication <br />device is also the password for the user interface of the inverter. <br />• Commission the inverter (see Section 7.2, page 53 ). <br />• The initial configuration of the inverter is made via the communication device. The <br />configuration is transferred to the inverter and the settings of the inverter are overwritten. <br />• Deactivate the Webconnect function of the inverter via the Sunny Portal. This prevents <br />unnecessary connection attempts of the inverter with Sunny Portal. <br />This section describes the commissioning procedure and gives an overview of the steps you must <br />perform in the prescribed order. <br />Procedure See <br />1. Commission the inverter.see section 7.2, page 53 <br />2. Establish a connection to the user interface of the inverter. <br />There are various connection options to choose from for <br />this: <br />• Direct connection via WLAN <br />• Direct connection via Ethernet <br />• Connection via WLAN in the local network <br />• Connection via Ethernet in the local network <br />see section 7.3 , page 54 <br />3. Log into the user interface. see section 7.4, page 58 <br />4. Select the inverter configuration option. Please note that <br />the SMA Grid Guard code for changing the grid-relevant <br />parameters must be available after completion of the first <br />ten feed-in hours or installation assistant (see "Application <br />for the SMA Grid Guard code" available at www.SMA- <br />Solar.com). <br />see section 7.5, page 59 <br />5. Ensure that the country data set has been configured cor- <br />rectly. <br />Inverter user manual <br />6. Make further inverter settings as needed. Inverter user manual <br />EN <br />G <br />L <br />I <br />S <br />H <br />534 S Sycamore St <br />- 10110979707/01/22