Laserfiche WebLink
7 Commissioning SMA Solar Technology AG <br />Installation ManualSBxx-1SP-US-41-IA-xx-12 58 <br />Procedure: <br />• Enter the IP address of the inverter in the address bar of the web browser. <br />☑ The login page of the user interface opens. <br />7.4 Logging Into the User Interface <br />After a connection to the user interface of the inverter has been established, the login page opens. <br />Log onto the user interface as described below. <br />Password assignment for user and installer <br />The passwords for the user groups Installer and User must be assigned when accessing the <br />user interface for the first time. If the inverter was registered in a communication device (e.g., <br />SMA Data Manager) and the system password was assigned, the system password is also the <br />installer password. In this case, only the user password must be assigned. <br />• If you as a specialist assign the user password, only pass the password on to persons to <br />access the inverter data via the user interface. <br />• If you as a user assign the installer password, only pass the password on to persons to <br />receive access to the system. <br />Installer password for inverters registered in a communication device or in <br />Sunny Portal <br />To be able to register the inverter in a communication device (e.g., SMA Data Manager) or in <br />a Sunny Portal system, the password for the user group Installer must match the system <br />password. If you assign a password for the user group Installer via the user interface of the <br />inverter, the same password must also be used as the system password. <br />• Assign a uniform installer password to all SMA devices in the system. <br />Procedure: <br />1. In the drop-down list Language, select the desired language. <br />2. In the Password field, enter a password for the User user group. <br />3. In the Repeat password field, enter the password again. <br />4. Click on Save. <br />5. In the New password field, enter a password for the Installer user group. Assign a uniform <br />password to all SMA devices to be registered in a system. The installer password is also the <br />system password. <br />6. In the Repeat password field, enter the password again. <br />7. Click on Save and log in. <br />☑ The Configuring the Inverter page opens. <br />EN <br />G <br />L <br />I <br />S <br />H <br />534 S Sycamore St <br />- 10110979707/01/22