Laserfiche WebLink
7 Commissioning SMA Solar Technology AG <br />Installation ManualSBxx-1SP-US-41-IA-xx-12 60 <br />• Configuration with the installation assistant (recommended) <br />• Manual configuration <br />Adopting the Configuration from a File <br />You can adopt the inverter configuration from a file. To do this, there must be an inverter <br />configuration saved to a file. <br />Procedure: <br />1. Select the configuration option Adopting configuration from a file. <br />2. Select [Browse...] and select the desired file. <br />3. Select [Import file]. <br />Configuring the Installation Assistant (Recommended) <br />1. Select the configuration option Configuration with Installation Assistant. <br />☑ The installation assistant will open. <br />2. Follow the installation assistant steps and make the settings appropriate for your system. <br />3. For every setting made in a step, select [Save and next]. <br />☑ In the last step, all made settings are listed in a summary. <br />4. To correct settings you made, select [Back], navigate to the desired step, correct settings and <br />select [Save and continue]. <br />5. Once all settings are correct, select [Next] in the summary. <br />6. To save the settings to a file, select [Export a summary] and save the file on your end <br />device. <br />7. To export all parameters and their settings, select [Export all parameters]. This exports all <br />parameters and their settings into an HTML file. <br />☑ The start page of the user interface opens. <br />Manual configuration <br />You can configure the inverter manually by setting the desired parameters. <br />Procedure: <br />1. Select the configuration option Manual Configuration. <br />☑ The Device Parameters menu on the user interface will open and all available <br />parameter groups of the inverter will be displayed. <br />2. Select [Edit parameters]. <br />3. Select the desired parameter group. <br />☑ All available parameters of the parameter group will be displayed. <br />4. Set the desired parameters. <br />5. Select [Save all]. <br />☑ The inverter parameters are set. <br />EN <br />G <br />L <br />I <br />S <br />H <br />534 S Sycamore St <br />- 10110979707/01/22