Laserfiche WebLink
Leaders in Solar Safety54 <br />FireRaptor Overview <br />The IMO FireRaptor provides three forms of Solar Panel Rapid Shutdown to ZERO VOLTS in case of fire or other emergency: <br />The FireRaptor can be installed without any set-up and with any string inverter as its functionality is completely independent. “Plug & Play” <br />style installation using industry standard connectors is easy, whether fitted to new installs or retro-fitted to existing projects to upgrade fire <br />safety functionality. <br />The FireRaptor meets the current requirements of ® <br />2017 <br />Ÿ MANUAL EMERGENCY SHUTDOWN <br />Manual shutdown is operated via an Emergency Rapid Shutdown Switch utilising a typical “one push” large emergency push button. The <br />switch can be conveniently located anywhere for emergency access and is supplied with a 24VDC power supply to interface with the <br />FireRaptor units. <br />Ÿ AUTOMATIC EMERGENCY TEMPERATURE SHUTDOWN <br />Automatic shutdown occurs via the temperature sensor onboard the FireRaptor detecting an ambient temperature rise in excess of 85°C <br />(185°F). In the event that the temperature exceeds 85°C (185°F) the FireRaptor will act to shut-down the PV panels as follows:- <br />FRS-01 - Shuts down the panels connected to the individual FireRaptor sensing the temperature rise above 85°C (185°F). The FireRaptor <br />will re-engage the panels if the temperature drops back below 85°C (185°F) provided it does not exceed 92°C (198°F), in which case a <br />manual reset of the Emergency Switch is required. <br />FRS-02 - Shuts down the entire string in which the individual FireRaptor sensing the temperature rise above 92°C (198°F) is connected. <br />If this occurs a signal is sent to the Emergency Switch and resetting of the Emergency Switch is then required by a professional installer. <br />The Emergency Switch can be configured to provide connection to the building’s central alarm system or notification via mobile <br />commincation (SMS, email etc.). <br />Ÿ AUTOMATIC EMERGENCY EXTERNAL POWER LOSS SHUTDOWN <br />Disconnection of the external AC supply, by whatever means, causes automatic remote operation of the Emergency Rapid Shutdown <br />Switch. <br />Part Number Description <br />FRS-01 FireRaptor Rapid Shutdown Unit - suitable for connection to two solar panels <br />FRS-02 FireRaptor Monitored Rapid Shutdown Unit - suitable for connection to two solar panels <br />FRS-ESW1 Emergency Rapid Shutdown Switch IP66 (for FRS-01) - includes 24VDC power supply <br />FRS-ESW1-K Emergency Rapid Shutdown Switch IP66 (for FRS-01) with Key Lock - includes 24VDC power supply <br />FRS-ESW2 Emergency Rapid Shutdown Switch IP66 (for FRS-02) - includes 24VDC power supply <br />FRS-ESW2-K Emergency Rapid Shutdown Switch IP66 (for FRS-02) with Key Lock - includes 24VDC power supply <br />FRS-SIGCAB1.8-F 1.8m (70”) Signal Cable terminated at one end with Tyco female connector for use at end of PV String <br />Ordering Information <br /> Solar Panel Rapid Shutdown <br />• Manual Panel Shutdown to 0V Operated from Ground Level <br />• Automatic Panel Shutdown to 0V at >85°C (185°F) Temperature <br />• Automatic Panel Shutdown to 0V on External Power Loss <br />• Hardwire or Mobile Communication Alarm Signalling <br />• Compliant with NEC 2017 and NEC 2020 <br />• Suitable for New Installations or Retro-Fit <br />® <br />2020 <br />534 S Sycamore St <br />- 10110979707/01/22