Laserfiche WebLink
2 SafetySMA Solar Technology AG <br />Installation Manual SBxx-1SP-US-41-IA-xx-12 11 <br />WARNING <br />Danger to life due to electric shock from destruction of the measuring device <br />due to overvoltage <br />Overvoltage can damage a measuring device and result in voltage being present in the <br />enclosure of the measuring device. Touching the live enclosure of the measuring device results in <br />death or lethal injuries due to electric shock. <br />• Only use measuring devices with a DC input voltage range of 600 V or higher. <br />CAUTION <br />Risk of burns from hot surfaces <br />The surface of the inverter can get very hot. Touching the surface can result in burns. <br />• Mount the inverter in such a way that it cannot be touched inadvertently. <br />• Do not touch hot surfaces. <br />• Wait 30 minutes for the surface to cool sufficiently. <br />• Observe the safety messages on the inverter. <br />CAUTION <br />Risk of injury due to weight of product <br />Injuries may result if the product is lifted incorrectly or dropped while being transported or <br />mounted. <br />• Transport and lift the product carefully. Take the weight of the product into account. <br />• Wear suitable personal protective equipment for all work on the product. <br />NOTICE <br />Damage to the enclosure seal in subfreezing conditions <br />If you open the product or disconnect the Power Unit and Connection Unit when temperatures <br />are below freezing, the enclosure seals can be damaged. Moisture can penetrate the product <br />and damage it. <br />• If a layer of ice has formed on the enclosure seal when temperatures are below freezing, <br />remove it prior to opening the product (e.g. by melting the ice with warm air). <br />• Do not disassemble the Power Unit and Connection Unit unless the ambient temperature is <br />at least 0°C (32°F) and conditions are frost-free. <br />EN <br />G <br />L <br />I <br />S <br />H <br />534 S Sycamore St <br />- 10110979707/01/22