Laserfiche WebLink
7/22/22, 5:41 PM ATC Hazards by Location <br />https://hazards.atcouncil.org/#/wind?lat=33.7507481&lng=-117.8631256&address=710 N Minter St unit 6%2C Santa Ana%2C CA 92701%2C USA 1/2 <br />Hazards by Location <br />Search Information <br />Address: 710 N Minter St unit 6, Santa Ana, CA 92701, <br />USA <br />Coordinates: 33.7507481, -117.8631256 <br />Elevation: 130 ft <br />Timestamp: 2022-07-23T00:41:33.676Z <br />Hazard Type: Wind <br />ASCE 7-16 <br />MRI 10-Year 66 mph <br />MRI 25-Year 71 mph <br />MRI 50-Year 77 mph <br />MRI 100-Year 81 mph <br />Risk Category I 89 mph <br />Risk Category II 95 mph <br />Risk Category III 102 mph <br />Risk Category IV 106 mph <br />ASCE 7-10 <br />MRI 10-Year 72 mph <br />MRI 25-Year 79 mph <br />MRI 50-Year 85 mph <br />MRI 100-Year 91 mph <br />Risk Category I 100 mph <br />Risk Category II 110 mph <br />Risk Category III-IV 115 mph <br />ASCE 7-05 <br />ASCE 7-05 Wind Speed 85 mph <br />The results indicated here DO NOT reflect any state or local amendments to the values or any delineation lines made during the building <br />code adoption process. Users should confirm any output obtained from this tool with the local Authority Having Jurisdiction before <br />proceeding with design. <br />Disclaimer <br />Hazard loads are interpolated from data provided in ASCE 7 and rounded up to the nearest whole integer. Per ASCE 7, islands and coastal <br />areas outside the last contour should use the last wind speed contour of the coastal area – in some cases, this website will extrapolate past <br />the last wind speed contour and therefore, provide a wind speed that is slightly higher. NOTE: For queries near wind-borne debris region <br />boundaries, the resulting determination is sensitive to rounding which may affect whether or not it is considered to be within a wind-borne <br />debris region. <br />Mountainous terrain, gorges, ocean promontories, and special wind regions shall be examined for unusual wind conditions. <br />While the information presented on this website is believed to be correct, ATC and its sponsors and contributors assume no responsibility <br />or liability for its accuracy. The material presented in the report should not be used or relied upon for any specific application without <br />competent examination and verification of its accuracy, suitability and applicability by engineers or other licensed professionals. ATC does <br />not intend that the use of this information replace the sound judgment of such competent professionals, having experience and knowledge <br />in the field of practice, nor to substitute for the standard of care required of such professionals in interpreting and applying the results of the <br />report provided by this website. Users of the information from this website assume all liability arising from such use. Use of the output of <br />this website does not imply approval by the governing building code bodies responsible for building code approval and interpretation for the <br />130 ft <br />Map data ©2022 Google, INEGI Report a map error <br />710 N Minter St <br />Unit 608/09/22