Laserfiche WebLink
CONTRACTOR <br />Saveco Inc. <br />Address: 435 Rivera St. Suite E <br />Riverside, CA 92501 <br />License: 1052375 <br />Phone: 833-372-8326 <br />Project Name: <br />Terence Casey <br />Property address: <br />906 Catalina Ave <br />Santa Ana, CA 92706 <br />APN:00322212 <br />DATE: 07/01/2022 <br />VICINITY MAP <br />SCALE: NTS <br />PV SOLAR SYSTEM DETAILS <br />ELECTRICAL INFORMATION: <br />NEW UPGRADED <br />MAIN SERVICE PANEL BUS SIZE: 125A <br />MAIN SERVICE BREAKER SIZE: 100A <br />MOUNTING SYSTEM: <br />BUILDING INFORMATION: <br />CONSTRUCTION TYPE: V-B <br />OCCUPANCY: R3 <br />ROOF: <br />SYSTEM SIZE: DC STC: 10.27KW <br />SYSTEM SIZE: AC CEC: 9.36 KW <br />SOLAR MODULES: ( ) <br />ROOF PLAN <br />SINGLE LINE DIAGRAM <br /> ATTACHMENT LAYOUT <br />SIGNAGE <br />INVERTER DATA SHEET <br />1 <br />INDEX <br />2 <br />3 <br />4 <br />5 <br />6 <br />7 <br />8 <br />9 <br />SITE PLAN <br />MODULE DATA SHEET <br />SATELLITE VIEW <br />SCALE: NTS <br />RACKING DATA SHEET <br />ATTACHMENT DATA SHEET <br />26 <br />IRONRIDGE <br />Comp Shingle <br />Canadian 395 watt <br />TRUSS <br />RSD DATA SHEET <br />10 <br />INVERTERS: ( ) Enphase IQ8+ Microinverters26 <br />MAIN <br />3. ALL METALLIC EQUIPMENT SHALL BE GROUNDED <br />4. CONTRACTOR SHALL OBTAIN ELECTRICAL PERMITS PRIOR TO <br />INSTALLATION AND SHALL COORDINATE ALL INSPECTIONS, TESTING <br />COMMISSIONING AND ACCEPTANCE WITH THE CLIENT, <br />UTILITY CO. AND CITY INSPECTORS AS NEEDED. <br />5. THE ELECTRICAL CONTRACTOR SHALL VERIFY THE EXACT LOCATIONS OF <br />SERVICE POINTS AND SERVICE SIZES WITH THE SERVING UTILITY COMPANY <br />AND COMPLY WITH ALL UTILITY COMPANIES REQUIREMENTS. <br />6. DRAWINGS ARE DIAGRAMMATIC ONLY, ROUTING OF RACEWAYS SHALL <br />BE OPTION OF THE CONTRACTOR UNLESS OTHERWISE NOTED AND SHALL <br />BE COORDINATED WITH OTHER TRADES. <br />7. IF THE ROOF MATERIAL OR ROOF STRUCTURE NOT ADEQUATE FOR PV <br />INSTALLATION, CALL ENGINEER PRIOR TO INSTALL. THE CONTRACTOR IS <br />RESPONSIBLE TO VERIFY THAT THE ROOF IS CAPABLE OF WITHSTANDING <br />THE EXTRA WEIGHT. <br />8. IF THE DISTANCES FOR CABLE RUNS ARE DIFFERENT THAN SHOWN, THE <br />CONTRACTOR SHALL NOTIFY THE ELECTRICAL ENGINEER TO VALIDATE THE <br />WIRE SIZE. FINAL DRAWINGS WILL BE RED-LINED AND UPDATED AS <br />APPROPRIATE. <br />9. WHENEVER A DISCREPANCY IN QUALITY OF EQUIPMENT ARISES ON THE <br />DRAWING OR SPECIFICATIONS, THE CONTRACTOR SHALL BE RESPONSIBLE <br />FOR PROVIDING AND INSTALLING ALL MATERIAL AND SERVICES REQUIRED <br />BY THE STRICTEST CONDITIONS NOTED ON THE DRAWINGS OR IN THE <br />SPECIFICATIONS TO ENSURE COMPLETE COMPLIANCE AND LONGEVITY OF <br />THE OPERABLE SYSTEM REQUIRED BY THE ARCHITECT/ENGINEERS. <br />10. ALL BROCHURES, OPERATION MANUALS, CATALOGS, SHOP DRAWINGS, <br />ETC. SHALL BE HANDED OVER TO OWNER'S REPRESENTATIVE AT THE <br />COMPLETION OF WORK <br />PHOTOVOLTAIC NOTES: <br />1. ROOFTOP MOUNTED PHOTOVOLTAIC PANELS AND MODULES SHALL <br />BE TESTED, LISTED AND IDENTIFIED BY RECOGNIZED ELECTRICAL <br />TESTING LABORATORY <br />2. SOLAR SYSTEM SHALL NOT COVER ANY PLUMBING OR MECHANICAL <br />VENTS <br />3. MODULES AND SUPPORT STRUCTURES SHALL BE GROUNDED. <br />5. REMOVAL OF AN INTERACTIVE INVERTER OR OTHER EQUIPMENT SHALL <br />NOT DISCONNECT THE BONDING CONNECTION BETWEEN THE GROUNDING <br />ELECTRODE CONDUCTOR AND THE PHOTOVOLTAIC SOURCE AND/OR <br />OUTPUT CIRCUIT GROUNDED CONDUCTORS. <br />4. SOLAR INVERTER SHALL BE LISTED TO UL1741. <br />6. ALL PV MODULES AND ASSOCIATED EQUIPMENT AND <br />WIRING SHALL BE PROTECTED FROM PHYSICAL DAMAGE. <br />7. LIVE PARTS OF PV SOURCE CIRCUITS AND PV OUTPUT <br />CIRCUITS OVER 150V TO GROUND SHALL NOT BE <br />ACCESSIBLE TO OTHER THAN QUALIFIED PERSONS WHILE <br />ENERGIZED. <br />8. INVERTER IS EQUIPED WITH INTEGRATED GFDI, THUS <br />PROVIDING GROUND FAULT PROTECTION <br />9. ALL CONDUCTORS SHALL BE COPPER AND 90 DEG <br />RATED <br />10. ALL ELECTRICAL EQUIPMENT SHALL BE LISTED BY A <br />RECOGNIZED ELECTRICAL TESTING LABORATORY. <br />11. A SINGLE CONDUCTOR SHALL BE PERMITTED TO BE <br />USED TO PERFORM THE MULTIPLE FUNCTIONS OF DC <br />GROUNDING, AC GROUNDING AND BONDING BETWEEN <br />AC AND DC SYSTEMS. <br />12. NON-CURRENT CARRYING METAL PARTS OF <br />EQUIPMENT SHALL BE EFFECTIVELY BONDED TOGETHER. <br />BOND BOTH ENDS OF RACEWAYS. <br />GENERAL NOTES <br />1. ALL ELECTRICAL MATERIALS SHALL BE NEW AND LISTED BY RECOGNIZED <br />ELECTRICAL TESTING LABORATORY <br />CUSTOM MADE EQUIPMENT SHALL HAVE COMPLETE TEST DATA SUBMITTED <br />BY THE MANUFACTURER ATTESTING TO ITS SAFETY <br />2. OUTDOOR EQUIPMENT SHALL BE NEMA 3R RATED OR BETTER <br />ECB DATA SHEET11 <br />THE INSTALLATION OF SOLAR ARRAYS AND <br />PHOTOVOLTAIC POWER SYSTEMS SHALL COMPLY WITH <br />THE FOLLOWING CODES: <br />2019 CALIFORNIA BUILDING CODE <br />2019 CALIFORNIA RESIDENTIAL CODE <br />2019 CALIFORNIA GREEN BUILDING STANDARD CODE <br />2019 CALIFORNIA PLUMBING CODE <br />2019 CALIFORNIA MECHANICAL CODE <br />2019 CALIFORNIA ELECTRICAL CODE <br />2019 CALIFORNIA FIRE CODE <br />2019 CALIFORNIA ENERGY CODE <br />2016 INTERNATIONAL PROPERTY MAINTENANCE CODE <br />ALL OTHER ORDINANCE ADOPTED BY THE LOCAL <br />GOVERNING AGENCIES <br />TEST REPORT12 <br />CLASS A FIRE RATING13 <br />: 2 X 4 @ 24" O.C. <br />Bldg permit #101112109 <br />Elect permit #20177449 <br />Permits issued on 9/29/22 <br />Elect. approved by M.S. on 9/28/22 <br />906 E Catalina Ave <br />09/29/22