Laserfiche WebLink
designed to be used with insulation and seam fastening <br />plates to secure membrane and insulation to structural <br />concrete. Fastener length must be selected to penetrate <br />into the concrete deck a minimum of 1 inch (25.4 mm). <br />3.9.6 Lite-Deck Fastener: The Lite-Deck Fastener is <br />used in conjunction with a specially designed 3-inch <br />(76.2 mm) Lite-Deck Metal Plate for insulation attachment <br />to gypsum, cementitious wood liber (Teclum IESR-11121), <br />and lightweight concrete decks. Fastener length must be <br />selected to penetrate into the deck a minimum of 2 inches <br />(50.8 mm). <br />3.9.7 GypTec Fasten€r: The GypTec Fastener is a <br />glass-filled nylon auger lastener designed for securing <br />mechanically attached membranes and insulation to <br />gypsum and cementitious wood fiber (Tectum <br />tnsulatton or substrate. lt has a coverage ,rate of <br />approximately 60 square feet per gallon (1 5 m'lL). The <br />adhesive is supplied in tgallon ('18.9 L) containers and <br />has a shelf life oI one year <br />3.10.2 Aqua Base 120: Aqua Base 120 is a high-strength. <br />water-based contact adhesive used to adhere EPDM. TPO <br />and PVC membranes to the insulation or substrate. lt has <br />a coverage rate ol approxrmately 120 square feet per <br />gallon (3 m'lL) The adhesrve is supplied in 5{allon <br />('18.9 L) containers and has a shelf life of one year. <br />3.10.3 Sure-Flex Low-VOC PVC Bonding Adhesives: <br />Sure-Flex Low VOC PVC Bonding Adhesives is high- <br />strength, solvent-based contact adhesives used to adhere <br />PVC membranes to an insulation or substrate. They have <br />a coverage rate of approximately 60 square feet per gallon <br />(1.5 m'lL). The adhesive is supplied in s{allon (189 L) <br />containers with a shelf life of one year <br />3.10.4 Sure-Weld Bondlng Adhosive: Sure-Weld <br />Bonding Adhesive is a high-strength, solvent-based <br />contact adhesive used to adhere TPO membranes to <br />an rnsulatron or substrate. lt has a coverage rate of <br />approximately 60 square feet per gallon (1.5 m'il). The <br />adhesive is supplied in s-gallon (18.9 L) containers with a <br />shelf life of one year. <br />3.10.5 Low vOC Bonding Adheslvo: Low VOC Bonding <br />Adhesive is a high-strength, solvent-based contact <br />adhesive used to adhere EPDM and TPO membranes to <br />an rnsulalron or substrate. lt has a coverage rate of <br />approximately 60 square feet per gallon (1.5 m'l L). The <br />adhesive is supplied in s-gallon ('18.9 L) containers with a <br />shell life of one year. <br />3.10.6 HydroBond PVC Watar.Basod Adhesive: <br />HydroBond PVC WaterBased Adhesive is a water-based. <br />wet lay-in, one-sided adhesive to be used to adhere Sure- <br />Flex PVC and PVC FleeceBACK membranes to an <br />insulation or substrate. lt has a coverage rate of <br />1OO square feet per gallon (2.5 rn2tL). The adhesive is <br />supplied in s-gallon 918.9 L) containers with a shelf life of <br />one year. <br />3.10.7 Low VOC Bonding Adhesive 1168: Low VOC <br />Bonding Adhesive '1168 is high-strength. solvent-based <br />contact adhesive used to adhere EPDM and TPO <br />membranes to an insulatron or substrale. lt has a coverage <br />rate of approxrmately 60 square feet per gallon ( 1.58 m'lL). <br />The adhesive is supplied in s-gallon (18.9 L) containers <br />with a shelf life of one year. <br />3.10.8 Solvont-Free EPDM Bonding Adhesive: Solven! <br />Free EPDM Bonding Adhesive is a high-strength, polymer- <br />based adhesive. This adhesive can be used to adhere all <br />Sure-Seal or Sure.White EPDM membranes as a one- <br />sided, wet lay-in adhesive lt has. a coverage rale of <br />100 square feet per gallon 12.5 m'lL). The adhesive is <br />supplied in s-gallon (18.9 L) containers with a shelf life of <br />six months <br />3.10.9 Cold Appliod Adhesive: Cold Applied Adhesive is <br />a solvent-free, asphalt-modified polyether adhesive. This <br />adhesive can be used with all Sure.Seal or Sure-Weld AFX <br />membranes as a one-sided, wet lay-in adhesive. lt has a <br />coverage rate of 67 square feet per gallon (1.6 m2ll1. The <br />adhesive is supplied in s-gallon ('18.9 L) containers with a <br />shelf life of one year. <br />3.10.10 FAST Adhesives: FAST 100, FAST 1001V, <br />FAST Adhesive Dual Cartridge, FAST Adhesive Box Sets, <br />Flexible FAST and FAST Bag-in-a-Box Adhesives are two- <br />component polyurethane adhesives used to adhere <br />FleeceBACK membranes and insulations to various <br />ESR.11 12 <br />decks. Fastener length must be selected to penetrate into <br />the deck a minimum of 1.5 inches (38.1 mm). <br />3.9.8 HP Polymer S€am Plate: This is a 2-inch-diameter <br />(50 mm) polymer plate designed to be used with HP and <br />HD '14'10 fasteners to mechanically attach roofing <br />membranes to the roof deck. <br />3.9.9 Sure-Tite Fastener and ST Fastoning Bar: This is <br />a heavy-duty, epoxy-coated steel screw and bar used to <br />secure reinforced EPDM membranes to steel or wood <br />deck. The bar is '1 -inch-wide-by-o.040-inch-thick-by- <br />1o-fooFlong (25.4 mm by 1.'1 mm by 3.1 m) galvalume- <br />coated steel with prepunched holes 6 inches (150 mm) <br />on center. <br />3,9.10 HP-X Fastener: This is an epoxy-coated carbon <br />steel screw used in combination with the Piranha <br />Fastening Plate to mechanically attach TPO membranes to <br />steel or wood substrate. Fastener length must be selected <br />to penetrate th.ough the steel deck a minrmum of'/a 'nch(19.1 mm), and into the wood deck a minimum of 1 inch <br />(25.4 mm). <br />3.9.11 Plranha Faslening Plate: This is a 23ls-inch- <br />diameter galvalume-coated steel plate designed to be used <br />with HP-X fasteners to mechanically attach PVC and TPO <br />membranes to the roof deck. <br />3.9.12 HP-XTRA Fastener: This is an epoxy-coated <br />carbon steel screw used in combination with the Piranha <br />XTRA Fastening Plate to mechanically attach PVC and <br />TPO membranes to steel or wood substrate. Fastener <br />lenglh musl be selected to penetrate through the steel <br />deck a minrmum of '/a rnch ('19 1 mm) and rnto the wood <br />deck a minimum of '1 inch (25.4 mm). <br />3.9.13 Piranha XTRA Fastenlng Plate: This is a <br />23ls-inch4iameter galvalume.coated steel plate designed <br />to be used with HP-XTRA fasteners to mechanically attach <br />PVC and TPO membranes to the roof deck. <br />3.9.14 PVC Oval Barbod Plate: This is a 11/2-inch-by- <br />23la-inch (35 mm by 69.85 mm) Oval Barbed Plate <br />design€d to be used with HP-X Fasteners to mechanically <br />attach PVC membranes to the roof deck. <br />3.9.15 OllG lnc. RhinoBond Plate: The RhinoBond Plate <br />is a linch-diameter (76.2 mm), o.o2&inchlhick (0.7 mm) <br />galvalumecoated steel plate, coated with a prop.ietary <br />adhesive and used with the HP-X fastener to mechanically <br />attach PVC and TPO membranes to the roof deck. The <br />adhesive bonds the plate to the underside of the <br />membrane. <br />3.10 Adhosivos: <br />3.10.1 90-8-30A Bonding Adhesive: 90-8-30A Eonding <br />Adhesive is a high-strength, solvenFbased contact <br />adhesive used to adhere EPDM membranes to the <br />ESR-1463 I Most l/videly Acc€pted and Trusted Page 3 of 10