|
June 19, 2013 SIGN COMPONENTS MANUAL (SAM) 42
<br />3. When these units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or output
<br />rating of the Class 2 supply.
<br />4. These products are suitable for use in dry, damp and wet locations with supply sources rated at 12 Volts DC or less.
<br />5. These products are not required to be enclosed or protected from the weather in the end product.
<br />6. These products may be secured in place in the end product by any means available.
<br />EXCELLART SIGN PRODUCTS LLC
<br />1654 S. LONE ELM RD
<br />E152309
<br />OLATHE KS 66061
<br />Frame system, Series EC(+) followed by -4, -4R, -6, -6R, -7, -7R, -8, -8R, -9, -9R, -12 Hinged and Standard, -D/F Hinged and
<br />Standard, -IDS, -S/F Hinged and Standard, or EC-S/F Access System. Accessories for use with EC frame systems, frame, angle,
<br />hat section, 6 in. radius corner, 9 in. radius corner, Cat. Nos. EC-4, -7, -8, EC-IDS, EC-Xtra, FF, FF-2, H-1, H-1.5, LC, LF, RR, or
<br />RRC retainers, Cat. No. EC-12 frame retainer brace, Cat. No. EC-S/F access system, Cat. No. EC lamp raceway, Cat. No. EC
<br />raceway cover, Cat. No. EC lamp/ballast track, Cat. No. EC-IDS raceway, Cat. No. EC Flex System for standard frame, hinged
<br />frame, or retro fit, Cat. No. EC-Tl, -T2 trim caps, or Cat. No. 1 1/2, 2 1/2, or H divider bars. Cat. Nos. F retainer, F hinged retainer,
<br />FF short retainer, EC-3.25 radius post, EC-3.25 rectangular post, EC-revel connector, EC-3.25 bleed frame, EC-8 in. radius
<br />quarter end, EC channel letter front, EC channel letter back, EC channel letter lid.
<br />Frame system Excellart (++) followed by C, C-2, M-C, or MC-R, for use with retainers MC- Alternate M-C, ZF.188, ZF.250, ZF-1
<br />1/2, ZF-2, ZFC2 1/2, or ZFC-3. Frame system Narrowline, Cat. Nos. EC-4RN frame, EC-4N frame, 1 in. radius corner connector
<br />and cap.
<br />(+) Frames, angles, and hat sections have the same catalog number as the frame system. Frames available in standard or hinged
<br />versions.
<br />(++) Frames available in smooth or ribbed versions.
<br />Expanda Frame Model AMB13920. Lamp Socket Raceway and Cover Models AMB990 and AMB991.
<br />1, When installed in an outdoor wet location application, consideration shall be given to conducting the water exclusion test of UL
<br />48.
<br />2. The suitability of the components to serve as wireways and electrical enclosures shall be determined in the end use.
<br />3. When installed in an outdoor wet location, the bottom of the cabinet system shall be provided with at least two drain holes in
<br />each inside recess, except for the wireway.
<br />FANTASTIC DISPLAYS INC
<br />2049 S BAKER AVE
<br />E362917
<br />ONTARIO, CA 91761
<br />Class 2 powered LED modules, Cat. Nos. LMYX 225 [+1, LMYX 324 [+1, LMYX 220 [+1, LMYX 332 [+1, LMYX 340 [+L LMYX 326
<br />[+1, LMYX 341 [+1, LMYX 112 [+1, LMYX 120 [+1, LMYX 102 [+], LMYX 117 [+1.
<br />1. This product is only suitable for connection to a Class 2 power source, rated 12 Volt DC or less.
<br />2. This product has not been evaluated for use when connected to a power source that does not comply with Class 2 voltage and
<br />energy limits and which is rated greater than electrical ratings.
<br />3. This Class 2 LED module is rated as noted in the electrical ratings tables. When units are connected to a Class 2 circuit, they
<br />are not to draw a total wattage of greater than the secondary or output rating of the Class 2 supply.
<br />4. This product is suitable for use in dry, damp and wet locations with supply sources rated at electrical ratings or less.
<br />5. This product is not required to be enclosed or protected from the weather in the end product.
<br />6. This product may be secured in place in the end products by any means available.
<br />FEDERAL HEATH SIGN CO. LLC
<br />4602 NORTH AVE
<br />E125271
<br />OCEANSIDE, CA 92056
<br />Sign face tensioning systems, designated "KLICK-RAIL".
<br />1. Water exclusion must be determined in the end product.
<br />2. Any frame dimension greater than 1.8m (6 feet) needs to be braced to prevent billowing.
<br />3. This system limited to only decorative applications, and together with the flexible face material shall comply with the external
<br />decorative face requirements of UL 48, particularly the clearances from heat-generating components to decorative plastic
<br />panels.
<br />4. The suitability of secureness of the clamp and flexible material shall be judged in the end-use application.
<br />5. The installation of this system in a sign shall conform with the instructions provided with this tensioning system.
<br />Class 2 Powered LED Modules, designated RVI Series.
<br />1. These products are only suitable for connection to a UL Listed or UL Recognized Class 2, DC power source.
<br />2. These products have not been evaluated for use when connected to a power source that does not comply with Class 2 voltage
<br />and energy limited supplies.
<br />3. Class 2 LED Illumination, RVI Series is rated 20 W per 2.7 m length with yellow LEDs and 21 W per 2.7 m length with Red
<br />LEDs. When units are connected to a Class 2 circuit, they are not to draw a total wattage of greater than the secondary or
<br />output rating of the Class 2 supply and 60 W per Class 2 circuit.
<br />4. These products are suitable for use in dry, damp locations. When the Class 2 output is 12 Vor under, these products are
<br />suitable for wet locations.
<br />5. These products are not required to be enclosed or protected from weather.
<br />Controller boards, Models PCB64PD, PCB32PD, PCB06PD.
<br />1. The controller and drivers covered by this report are suitable for damp and dry locations only.
<br />2, The controller Models PCB64PD, PCB32PD, and PCB06PD are suitable for use on a 120 V, 60 Hz service and are capable of
<br />switching up to 64,32, and 6 points, respectively. They are for use only with triac driver Models PC820T6, PCB10T1 2, and
<br />PCB10T4.
<br />3. The Model PCB20T6,6 point triac driver board is suitable for use with 120 V, 60 Hz service with each point rated for a maximum
<br />load of 13 A, 1560 W.
|