|
2
<br />A4
<br />7
<br />A4
<br />4
<br />A4
<br />2
<br />A4
<br />5
<br />A4
<br />-
<br />---
<br />A4
<br />6
<br />CEILING TILE IN
<br />LOBBY WHITE.
<br />AREA OVER
<br />COUNTER TO BE
<br />P-2
<br />SEE MARCOS
<br />DESIGN SPECS
<br />FOR GRAPHIC AND
<br />FINAL LOBBY
<br />PAINT COLOR AND
<br />TEXTURES.
<br />FRP 8FT HIGH
<br />BEHIND &
<br />ADJACENT
<br />TO SINKS
<br />"B2" BASE ON ALL
<br />EXPOSED WALLS OF
<br />THE WALK-IN
<br />ALL EXPOSED WALK-IN
<br />WALLS AND
<br />CEILING SHALL BE
<br />"GALVALUME -EMBOSSED
<br />26 GA" PANELS. THEY ARE
<br />DURABLE, SMOOTH,
<br />NONABSORBENT
<br />AND EASILY CLEANABL
<br />A
<br />A5.1
<br />B
<br />A5.1
<br />P1 SF2 SF4 SF3
<br />SF5 F1
<br />F -2
<br />B-2
<br />CT-2
<br />B2
<br />F -2
<br />F -3
<br />B-3
<br />P-1ABOVE FRP
<br />3 CT-1
<br />CT-3
<br />INTEGRAL END-RETURN THAT GOES
<br />UP THE WALL 8" AND IS SEALED TO
<br />THE WALL.
<br />3
<br />A4
<br />SF-7
<br />F-2
<br />B-2
<br />5/8" GYP BOARD.
<br />FRP , REFER TO FINISH
<br />SCHEDULE.
<br />FLOOR TILE , REFER TO
<br />FINISH SCHEDULE.
<br />5/8" CEMENT BOARD.
<br />3/8" RADIUS. COVE
<br />BASE REFER TO
<br />FINISH SCHEDULE.
<br />1'
<br />-
<br />0
<br />"
<br />B-3
<br />F-2
<br />5/8" CEMENT BOARD.
<br />FRP 4'-0" TALL WITH WASHABLE
<br />PAINT ABOVE AT RESTROOM &
<br />KITCHEN. 8FT TALL BEHIND AND
<br />ADJACENT TO ALL SINKS
<br />3/8" RAIDUS COVE
<br />BASE , REFER TO
<br />FINISH SCHEDULE.
<br />FLOOR TILE , REFER TO
<br />FINISH SCHEDULE.
<br />EXTEND WATERPROOF
<br />MEMBRANE TO 1'-6" DISTANCE
<br />FROM WALL ON FLOOR.
<br />EXTEND WATERPROOF
<br />MEMBRANE TO 1'-0" AFF.
<br />WATERPROOF MEMBRANE
<br />W
<br />A
<br />T
<br />E
<br />R
<br />P
<br />R
<br />O
<br />O
<br />F
<br />ME
<br />M
<br />B
<br />R
<br />A
<br />N
<br />E
<br />TR-1
<br />5/8" GYPSUM WALL, REFER
<br />TO
<br />INTERIOR ELEVATIONS FOR
<br />FINISH.
<br />TILE, REFER TO INT.
<br />ELEVATIONS FOR
<br />FINISH
<br />5/8" CEMENT BOARD
<br />SCHLUTER QUADEC ,
<br />REFER TO FINISH SCHEDULE.
<br />TR-2SCHLUTER QUADEC ,
<br />REFER TO FINISH SCHEDULE.
<br />TILE, SEE INTERIOR
<br />ELEVATIONS
<br />5/8" CEMENT BOARD
<br />TILE, SEE INTERIOR
<br />ELEVATIONS
<br />TR-1
<br />F-1
<br />T-1
<br />SCHLUTER QUADEC ,
<br />REFER TO FINISH
<br />SCHEDULE.
<br />TILE , REFER TO
<br />FINISH
<br />SCHEDULE.
<br />5/8" CEMENT BOARD
<br />TILE , REFER TO
<br />FINISH
<br />SCHEDULE.
<br />F-2
<br />TR-1
<br />F-2
<br />5/8" GYP BOARD.
<br />FLOOR TILE , REFER TO
<br />FINISH SCHEDULE.
<br />5/8" CEMENT BOARD
<br />BEHIND
<br />TILE.
<br />SCHLUTER QUADEC , REFER
<br />TO FINISH SCHEDULE.
<br />TILE , REFER TO FINISH
<br />SCHEDULE.
<br />FINISH MATERIAL LEGEND (BASED ON JULY 9, 2021 -INTERIM STANDARDS)
<br />TAG DESCRIPTION MANUFACTURER ITEM #NAME/COLOR SIZE TYPE NOTES
<br />F-1 FLOOR TILE DALTILE SD14636S1P SADDLEBROOK
<br />|| FARMHOUSE 6"X36"1, 5
<br />F-2 FLOOR TILE DALTILE 0T03661P ASHEN GRAY 6"X6"2, 6
<br />F-3 FLOOR TILE DALTILE VL7012121P VOLUME 1.0 ||
<br />AMPLIFY BLACK
<br />12"X12"3, 6
<br />B-1 FLOOR TILE DALTILE SD14636S1P SADDLEBROOK
<br />|| FARMHOUSE
<br />6"X36"1, 16
<br />B-2 COVE TILE
<br />BASE
<br />DALTILE ASHEN GRAY 5"X6"
<br />B-3 COVE TILE
<br />BASE
<br />DALTILE VOLUME 1.0 ||
<br />AMPLIFY BLACK
<br />6"X12"
<br />T-1 WALL TILE DALTILE VV10361P VITRUVIAN
<br />WHITE GLOSSY
<br />3"X6"4
<br />T-2 WALL TILE DALTILE VV12361P VITRUVIAN
<br />LIGHT GREY
<br />GLOSSY
<br />3"X6"4
<br />TR-1 TRIM TILE SCHLUTER Q 100E QUADEC -SS 3/8"11
<br />TR-2 TRIM TILE SCHLUTER Q 80E QUADEC -SS 5/16"12
<br />TR-3 COVE BASE
<br />TRIM
<br />SCHLUTER AHK 1S
<br />100 A
<br />DILEX-AHK 3/8"16
<br />P-1 PAINT SHERWIN
<br />WILLIAMS
<br />SW 9165 GOSSAMER
<br />VEIL
<br />SATIN /
<br />EGGSHELL
<br />P-2 PAINT BENJAMIN
<br />MOORE
<br />PM-11 ESSEX GREEN SATIN /
<br />EGGSHEL
<br />WC-1 CUSTOM PRINT
<br />WOOD
<br />LOOK
<br />WALLCOVERING
<br />SHAW PPC
<br />DESIGN
<br />CT-1 CEILING TILE USG FROST -SLB
<br />440 -PROFILE A
<br />2'X2'7
<br />CT-2 CEILING TILE VINYL FACED GYP
<br />BOARD PANELS
<br />2'X4'9
<br />SF-1 SURFACE MSI QUARTZ CALCUTTA
<br />LEON
<br />2 CM
<br />SLAB
<br />SF-1
<br />(ALT)
<br />SURFACE WILSON ART Q4008 QUARTZ, HAID 2 CM
<br />SLAB
<br />SF-2 WOOD WALL
<br />TREATMENT
<br />MDF BOARD PRIMED 1" x 2"
<br />x 8'-0
<br />19
<br />SF-3 WOOD WALL
<br />TREATMENT
<br />MDF BOARD PRIMED 1" x 3"
<br />x 8'-0
<br />20
<br />SF-4 WOOD CHAIR
<br />RAIL
<br />MDF BOARD PRIMED 1" x 3"
<br />x 8'-0
<br />21
<br />SF-5 COMPACT
<br />LAMINATE
<br />WILSONART
<br />LAMINATE
<br />SHEER
<br />MESH
<br />4876-38
<br />FINE VELVET ||
<br />TYPE 569 ||
<br />DOUBLE SIDES
<br />ES1/4"
<br />THICK
<br />|| 4'x8'
<br />SF-5
<br />(ALT)
<br />KOROGARD
<br />WALL
<br />PROTECTION
<br />KOROSEAL
<br />INTERIOR
<br />FINISH
<br />MIST (33) ||
<br />TEXTURE: P1
<br />DUNE
<br />0.28"
<br />SF-6 LAMINATE WILSONART
<br />LAMINATE
<br />BLACK
<br />1595
<br />FINISH: 60
<br />MATTE
<br />4'x8'
<br />SF-7 FRP MARLITE P-199 FIBRE
<br />REINFORCED
<br />PLASTIC,
<br />BRITE WHITE
<br />PEBBLE
<br />QUARRY TILE (3/8" RAD.)
<br />QUARRY TILE (3/8" RAD.)
<br />2, 13,
<br />22
<br />3, 13,
<br />22
<br />GLOSS /
<br />SEMI GLOSS
<br />CT-3 CEILING.
<br />HARD LID
<br />HARD LID PAINTED
<br />WITH SEMI GLOSS
<br />Scale
<br />Project number
<br />Date
<br />Drawn by
<br />Checked by
<br />This document, and the ideas and designs incorporated
<br />herein, as an instrument of professional service, is the
<br />property of Everett Smith, and is not to be used in whole or
<br />in part, for any other project without the written authorization
<br />of Everett Smith/ ESDESIGNS. All Rights Reserved
<br />PREPARED BY:
<br />Email: everett@everettsmithdesigns.com
<br />PROJECT:
<br />CLIENT NAME:
<br />PROJECT ADDRESS:
<br />REVISIONS:
<br />IT IS THE RESPONSIBILITY OF THE CONTRACTOR TO FIELD VERIFY EXISTING SITE CONDITIONS AND DIMENSIONS PRIOR TO STARTING CONSTRUCTION. HIDDEN CONDITIONS MAY EXIST, AND ARE THE RESPONSIBILITY OF THE CONTRACTOR TO IDENTIFY AND BRING TO THE DESIGNERS ATTENTION.
<br />MENIFEE, CA 92584
<br />EEEEVVVVEEEERRRREEEETTTTTTTT SSSSMMMMIIIITTTTHHHH DDDDEEEESSSSIIIIGGGGNNNNSSSS,,,, IIIINNNNCCCC
<br />2023
<br />DDDDD S E
<br />30141 ANTELOPE RD. D774
<br />8/2/2024 5:40:47 PM
<br />As indicated
<br />8/
<br />2
<br />/
<br />2
<br />0
<br />2
<br />4
<br />
<br />5
<br />:
<br />4
<br />0
<br />:
<br />4
<br />7
<br />
<br />P
<br />M
<br />Z:\Shared\Everett Smith Designs\___ES Design Jobs\23-2292 BCAL Marcos Orange\23-2292 Orange Marcos Pizza 2024.07.25.rvt
<br />A4
<br />FINISH PLAN
<br />23-2292
<br />J.D. PHAM
<br />RS
<br />ES
<br />TE
<br />N
<br />A
<br />N
<br />T
<br />
<br />I
<br />M
<br />P
<br />R
<br />O
<br />V
<br />E
<br />M
<br />E
<br />N
<br />T
<br />MA
<br />R
<br />C
<br />O
<br />S
<br />
<br />P
<br />I
<br />Z
<br />Z
<br />A
<br />100 N.HARBOR BLVD.
<br />SUITE C-3
<br />SANTA ANA CA 92703
<br />1/4" = 1'-0"1 FINISH PLAN & ARTWORK PLAN
<br />1 1/2" = 1'-0"2 KITCHEN FLOOR TO WALL TILE
<br />SEE MARCOS DESIGN SPECS FOR EXACT COLORS
<br />RO
<br />O
<br />M
<br />
<br />N
<br />o
<br />.
<br />RO
<br />O
<br />M
<br />
<br />N
<br />A
<br />M
<br />E
<br />FLOOR BASE WALLS CEILINGS
<br />ROOM
<br />AREA
<br />ROOM
<br />PERIMETER
<br />CEILING
<br />HEIGHT
<br />(FEET)
<br />ROOM
<br />WALL
<br />AREA
<br /> F
<br />I
<br />N
<br />I
<br />S
<br />H
<br /> F
<br />I
<br />N
<br />I
<br />S
<br />H
<br /> F
<br />I
<br />N
<br />I
<br />S
<br />H
<br />CO
<br />L
<br />O
<br />R
<br /> F
<br />I
<br />N
<br />I
<br />S
<br />H
<br />01 LOBBY F-1 RUBBER
<br />BASE
<br />SD-2, SF-3, SF-4,
<br />SF-5
<br />PAINT CT-1 126 SF 64' - 0" 10 639' - 9"
<br />03 KITCHEN F-2 B-2 SF-7 SF-7 CT-2 714 SF 137' - 11" 10 1379' - 5"
<br />05 RESTROOM F-1 RUBBER
<br />BASE
<br />GB PAINT GB / PT-2 51 SF 28' - 8" 8 229' - 3"
<br />TOTAL 891 SF 230' - 7" 2248' - 5"
<br />1 1/2" = 1'-0"3 TILE TO FLOOR AT WET AREAS
<br />3" = 1'-0"5 WALL TILE SECTION
<br />3" = 1'-0"6 WALL TILE OUTSIDE CORNER
<br />3" = 1'-0"7 WALL TILE TRANSITION
<br />1 1/2" = 1'-0"4 DINING FLOOR TO BASE TILE
<br />FINISH SCHEDULE KEY NOTES:
<br />1. GROUT FOR FLOOR TILE TO BE MAPEI ULTRACOLOR PLUS CACOA #79 (3/16" JOINT)
<br />2. GROUT FOR FLOOR TILE TO BE MAPEI ULTRACOLOR PLUS CHARCOAL #47(3/8" JOINT)
<br />3. GROUT FOR FLOOR TILE TO BE MAPEI ULTRACOLOR PLUS CHARCOAL #47 (3/16" JOINT)
<br />4. GROUT FOR WALL TILE TO BE MAPEI KERACOLOR IRON #107 (1/4" JOINT)
<br />5. ORIENTATION TO BE HORIZONTAL TO THE FRONT COUNTER WITH 1/3 STAGGER
<br />6. ORIENTATION TO BE STACKED
<br />7. GRID TO BE PROFILE "A" AND TILE TO HAVE SLB (SHADOWLINE BEVEL) PROFILE.
<br />8. --9. GRID
<br />TO BE 5/16" COMMERCIAL QUALITY
<br />10. --11. TRIMFOR USE BETWEEN DIFFERENT ADJACENT TILES AND TILE TO GYP. BD. TRANSITIONS
<br />12. TRIM FOR USE AT OUTSIDE CORNERS
<br />13. INSIDE AND OUTSIDE CORNERS TO BE USED.
<br />14. BAR TOPS TO HAVE 1/4" RADIUS TOP & BOTTOM WITH 1/4" RADIUS CORNERS. THE FINISH IS
<br />TO BE NATURAL WITH PREMIUM POLYURETHANE. ALL LEG SUPPORTS SHALL BE 2" DIA. WITH
<br />ESCUTCHEON PLATES @ TOP AND BOTTOM AND HAVE BLACK CRINKLED FINISH. THE BAR
<br />TOPS AND SUPPORTS SHALL BE PROVIDED BY THE TABLE VENDOR.
<br />15. --
<br />16. TR-3
<br />AND ALL REQUIRED TRIM ACCESSORIES FOR FLOORING INSTALLATION
<br />17. --
<br />18. CONTACT
<br />RAFAEL BERNAL @ RAFEAL.B@MSISURFACES.COM OR 248.930.3459
<br />19. 1x2 MDF OR SIMILAR TO BE MOUNTED TO THE WALL @ 11" O.C. SPACING VIA CONSTRUCTION
<br />ADHESIVE AND CONCEALED HARDWARE || ANY NAIL / SCREW HOLES ARE TO BE FILLED,
<br />EDGES TO BE CAULKED || TRIM & WALL TO BE PAINTED P-1 || IT IS RECOMMENDED TO SAND
<br />THE WALLS, PRIME AND THEN INSTALL THE TRIM
<br />20. 1x3 MDF OR SIMILAR TO BE MOUNTED TO THE WALL VIA CONSTRUCTION ADHESIVE AND
<br />CONCEALED HARDWARE || ANY NAIL / SCREW HOLES ARE TO BE FILLED, EDGES TO BE
<br />CAULKED || TRIM & WALL TO BE PAINTED P-1 || IT IS RECOMMENDED TO SAND THE WALLS,
<br />PRIME AND THEN INSTALL THE TRIM
<br />21. 1x3 MDF OR SIMILAR TO BE MOUNTED TO THE WALL VIA CONSTRUCTION ADHESIVE AND
<br />CONCEALED HARDWARE || ANY NAIL /
<br />SCREW HOLES ARE TO BE FILLED, EDGES TO BE
<br />CAULKED || TRIM & WALL TO BE PAINTED P-1 || IT IS RECOMMENDED TO SAND THE WALLS,
<br />PRIME AND THEN INSTALL THE TRIM
<br />22. COVE BASE MUST CONTINUE UP WALL MIN 4" & FORM A SEAMLESS INTEGRAL 3/8" MIN RADIUS
<br />COVE WITH THE FLOOR
<br />RESTROOM BASE COVE WILL HAVE 3/8"
<br />RADIUS COVING INTEGRAL WITH THE
<br />FLOOR
<br />6" HIGH METAL SPLASHGUARD
<br />WILL BE INSTALLED BETWEEN
<br />THE PREP SINK & 3-
<br />COMPARTMENT SINK
<br />FLOORING
<br />Flooring shall be smooth, durable, nonabsorbant and easily cleanable. Flooring must be smooth on base coving and under equipment, shelving,
<br />sinks, and counters. The flooring shall be of an approved type that continues up the wall four (4) inches, in a seamless manner, forming a 3/8
<br />inch minimum radius cove as an integral unit. Vinyl/rubber topset coved base and/or the vinyl composition tiles (VCT) are not acceptable. Some
<br />slim foot ceramic, quarry and metal topset cove bases are generally acceptable. Submit samples of the proposed flooring and base cove for
<br />approval prior to installation. Concrete floors are to be patched so as to remove cracks and divots. If floor sealer is to be used, provide detailed
<br />specifications on the proposed floor sealer for evaluation and approval. The sealer must be an approved clear penetrating sealer that is oil, acid,
<br />and water resistant; pigmented sealers and epoxy paints are not acceptable. When excessive amounts of slip resistant agents are used, a
<br />high pressure cleaning system or equivalent must be provided with drainage to floor drains. (114268, 114269).
<br />CEILING
<br />Approved ceilings are required over all food and utensil handling areas, in restrooms and janitorial areas. Exposed beams must be flush and
<br />sealed to the ceiling to prevent any gaps where dust or vermin can accumulate. Hanging beams, pipes, fire sprinkler lines, conduit, décor, or
<br />other dust-and-vermin collecting items are not permitted over food and utensil handling areas. (113980, 113984, 114179, 114271).
<br />WALLS
<br />The wall surfaces behind sinks shall be covered with Fiberglass Reinforced Plastic (FRP), stainless steel, or the equivalent.The approved wall
<br />cover must extend up the wall at least four (4) feet from the back splash and cover the walls behind the sink and accompanying drainboards.
<br />The wall surface in the area where the dish machine is installed shall be covered with FRP, stainless steel, or the equivalent. The approved wall
<br />cover must extend up the wall at least eight feet from the floor and cover the walls behind the
<br />dish machine and accompanying drainboards. If high pressure spray cleaning equipment is proposed or required to clean nonskid flooring, then
<br />wall surfaces in these areas must be covered with an approved water resistant covering (i.e., FRP, stainless steel, or the equivalent) to a
<br />minimum of four (4) feet above the base cove. Indicate approved wall surfaces if you will be installing high pressure spray cleaning equipment.
<br />(§114268, 114269, 114271).
<br />WAREWASHING SINKS
<br />Warewashing sinks shall have at least three compartments with two integral metal drainboards. Sink compartments shall be large enough to
<br />accommodate immersion of the largest utensil; a minimum compartment size of 18" wide by 18" long by 12" deep is requried unless otherwise
<br />specified by this department. The utensil sink shall be installed to have a minimum 2" clearance between end walls, or have an integral end-
<br />return that goes up the wall 8" and is sealed to the wall. (114097, 114099, 114130.1, 114169).
<br />CLEAN IN PLACE
<br />Equipment or utensils that are fixed or are too large to fit in the warewashing sink or machine must be equipped with clean-in-place
<br />facilities. The minimum requirements for clean-in-place facilities are:
<br />a) Hot (minimum 120 °F) and cold water dispensed from a mixing faucet.
<br />b) Hoses must be food-grade/for potable water use, and have an approved backflow prevention device.
<br />c) The wastewater must be drained by indirect connection to an approved sewer line. (i.e., trench drain). (114099.3)
<br />HANDWASHING SINK
<br />Handwashing facilities shall be sufficient in number and conveniently located and unobstructed so as to be accessible at all times for use by
<br />food employees. Handwashing cleanser and single-use sanitary towels must be provided in dispensers at all handwashing facilities. Hot air
<br />blowers may be provided in lieu of the hand towel dispensers. All handwashing facilities shall have warm water supplied through a mixing valve
<br />or combination faucet at a temperature of at least 100°F. If the temperature is not readily adjustable at the faucet, the temperature shall be at
<br />least 100°F but not to exceed 108°F. (113953)
<br />JANITORIAL SINK
<br />A curbed cleaning facility or janitorial sink equipped with hot (120°F) and cold water and a drain shall be provided. The janitorial sink
<br />must be securely attached to the wall, the rim of the sink shall be no more than 30" above the floor. The wall surfaces behind and for 24 inches
<br />around the janitorial sink shall be water-resistant usch as Fiberglass Reinforced Plastic (FRP), tile, stainless steel, or equivalent. Provide a
<br />chemical storage shelf and mop rack in the janitorial area. (114279, 114281, 114282)
<br />FLOOR SINKS AND FLOOR DRAINS
<br />All equipment which generates condensate or similar liquid wastes shall be drained by means of indirect waste pipes into a floor sink. Floor
<br />drains are not to be used in lieu of floor sinks. All floor sinks must be at least half-exposed under the curb mounted equipment, or be in line with
<br />the front face of elevated freestanding equipment, and located within 15 feet of the condensate producing equipment. A properly coved
<br />protective enclosure will be required around the backside of half-exposed floor sinks where the floor sink is installed under curb or base
<br />mounted equipment, e.g., storage cabinet, display refrigerators, etc. Provide easily removable (without the use of tools) safety grates on
<br />exposed floor sinks. Floor drains are required in floors that are water-flushed for cleaning, where pressure spray methods for cleaning
<br />equipment are used, and where slip resistant agents are used on floors. Where floor drains are utilized, the floor surface shall be sloped 1:50 to
<br />the floor drains. Where floor drains are required for slip resistant floor surfaces inside walk-in refrigeration units, the floor shall be sloped toward
<br />the door to a trench drain or a floor drain located within the swing of the door. For sheet vinyl floroing, provide a special locking floor drain.
<br />Provide specifications on the locking clamp floor drain(s). (114193, 114268, 114269)
<br />No. Description Date
<br />3 BUILDING
<br />CORR.
<br />2024.05.15
<br />100 N Harbor Blvd #C-3 -
<br />101118438, 20182225,
<br />30146961, 4013888710/31/2024
|