Laserfiche WebLink
Design Results Actual @ Location Allowed Result LDF Load: Combination (Pattern) <br />Member Reaction (lbs)371 @ 0 5156 (1.50")Passed (7%)--1.0 D + 0.75 L + 0.75 Lr (All Spans) <br />Shear (lbs)227 @ 5"2310 Passed (10%)1.00 1.0 D + 1.0 L (All Spans) <br />Moment (Ft-lbs)248 @ 1' 7 1/2"1150 Passed (22%)1.00 1.0 D + 1.0 L (All Spans) <br />Live Load Defl. (in)0.010 @ 1' 7 1/2"0.108 Passed (L/999+)--1.0 D + 0.75 L + 0.75 Lr (All Spans) <br />Total Load Defl. (in)0.018 @ 1' 7 1/2"0.162 Passed (L/999+)--1.0 D + 0.75 L + 0.75 Lr (All Spans) <br />System : Wall <br />Member Type : Header <br />Building Use : Residential <br />Building Code : IBC 2018 <br />Design Methodology : ASD <br />•Deflection criteria: LL (L/360) and TL (L/240). <br />•Member has been designed in flat (plank) orientation. <br />•Allowed moment does not reflect the adjustment for the beam stability factor. <br />•Applicable calculations are based on NDS. <br />Bearing Length Loads to Supports (lbs) <br />Supports Total Available Required Dead Floor Live Roof Live Factored Accessories <br />1 - Trimmer - DF 1.50"1.50"1.50"176 130 130 371 None <br />2 - Trimmer - DF 1.50"1.50"1.50"176 130 130 371 None <br />•Maximum allowable bracing intervals based on applied load. <br />Lateral Bracing Bracing Intervals Comments <br />Top Edge (Lu)3' 3" o/c <br />Bottom Edge (Lu)3' 3" o/c <br />Dead Floor Live Roof Live <br />Vertical Loads Location Tributary Width (0.90)(1.00)(non-snow: 1.25)Comments <br />0 - Self Weight (PLF)0 to 3' 3"N/A 4.9 ---- <br />1 - Uniform (PSF)0 to 3' 3"4'15.8 -20.0 Roof <br />2 - Uniform (PSF)0 to 3' 3"8'5.0 10.0 -Ceiling <br />Weyerhaeuser warrants that the sizing of its products will be in accordance with Weyerhaeuser product design criteria and published design values. Weyerhaeuser expressly disclaims any other warranties <br />related to the software. Use of this software is not intended to circumvent the need for a design professional as determined by the authority having jurisdiction. The designer of record, builder or framer is <br />responsible to assure that this calculation is compatible with the overall project. Accessories (Rim Board, Blocking Panels and Squash Blocks) are not designed by this software. Products manufactured at <br />Weyerhaeuser facilities are third-party certified to sustainable forestry standards. Weyerhaeuser Engineered Lumber Products have been evaluated by ICC-ES under evaluation reports ESR-1153 and ESR-1387 <br />and/or tested in accordance with applicable ASTM standards. For current code evaluation reports, Weyerhaeuser product literature and installation details refer to <br />www.weyerhaeuser.com/woodproducts/document-library. <br />The product application, input design loads, dimensions and support information have been provided by ForteWEB Software Operator <br />Weyerhaeuser Notes <br />All locations are measured from the outside face of left support (or left cantilever end). All dimensions are horizontal. <br />MEMBER REPORT PASSED <br />Roof, 3' HDR (Roof) <br />1 piece(s) 4 x 6 DF No.2 (Plank) <br />ForteWEB Software Operator Job Notes 10/8/2023 6:53:29 PM UTC <br />Rong Lei <br />RL Engineering <br />(415) 887-8691 <br />leirongyao@gmail.com <br />ForteWEB v3.6, Engine: V8.3.1.5, Data: V8.1.4.1 <br />File Name: 23-1017 1005 S Virlee St, Santa Ana <br />Page 7 / 24 <br />Page 14 of 48 <br />1005 S Virlee St <br />Unit# 28/26/2024