Laserfiche WebLink
9 EN PHASE. <br />108M and 108A Microinverters <br />Our newest 108 Microinverters are the industry's first microgrid-forming, software- <br />defined microinverters with split-phase power conversion capability to convert DC <br />power to AC power efficiently. The brain of the semiconductor-based microinverter <br />is our proprietary application-specific integrated circuit (ASIC) which enables the <br />microinverter to operate in grid-tied or off-grid modes. This chip is built in advanced <br />55nm technology with high speed digital logic and has super-fast response times <br />to changing loads and grid events, alleviating constraints on battery sizing for home <br />energy systems. <br />Part of the En phase Energy System, 108 Series <br />Microinverters integrate with the Enphase IQ <br />Battery, En phase 10 Gateway, and the Enphase <br />App monitoring and analysis software. <br />Connect PV modules quickly and easily to <br />108 Series Microinverters using the included <br />0-DCC-2 adapter cable with plug-n-play MC4 <br />connectors. <br />Enphases <br />year limited <br />warranty <br />108 Series Microinverters redefine reliability <br />standards with more than one million <br />cumulative hours of power-on testing, <br />enabling an industry-leading limited warranty <br />of up to 25 years. <br />108 Series Microinverters are UL Listed as <br />PV Rapid Shut Down Equipment and conform <br />with various regulations, when installed <br />according to manufacturer's instructions. <br />© 2021 Enphase Energy. All rights reserved. En phase, the En phase logo, 108 microinverters, <br />and other names are trademarks of Enphase Energy, Inc. Data subject to change. <br />108MA-DS-OOO3-O1-EN-US-2O21-1O-19 <br />HUiihHI <br />Easy to install <br />Lightweight and compact with <br />plug-n-play connectors <br />Power Line Communication <br />(PLC) between components <br />Faster installation with simple <br />two-wire cabling <br />High productivity and reliability <br />Produce power even when the <br />grid is down <br />More than one million cumulative <br />hours of testing <br />Class II double-insulated <br />enclosure <br />Optimized for the latest high- <br />powered PV modules <br />Microgrid-forming <br />Complies with the latest <br />advanced grid support <br />Remote automatic updates for <br />the latest grid requirements <br />Configurable to support a wide <br />range of grid profiles <br />Meets CA Rule 21 (UL 1741-SA) <br />requirements <br />108M and 108A Microinverters <br />INPUT DATA IDCI I0BM-72-2-US I0BA-72-2-US <br />Commonly used module pairings'w <br />Module compatibility <br />MPPT voltage range V <br />Operating range V <br />Min/max start voltage V <br />Max input DC voltage V <br />Max DC current2 [module lsc]A <br />Overvoltage class DC port <br />DC port backfeed current mA <br />PV array configuration <br />260-460 <br />33 -4 5 <br />6O-cell/12O half-cell and 72-cell/144 half-cell <br />25-58 <br />3 0 /5 8 <br />60 <br />15 <br />0 <br />295-500 <br />36-4 5 <br />1x1 Ungrounded array; No additional DC side protection required; AC side protection requires max 2OA per branch circuit <br />OUTPUT DATA (ACI I0BM-72-2-US I0BA-72-2-US <br />Peak output power <br />Max continuous output power <br />Nominal (L-L) voltage/range3 <br />Max continuous output current <br />Nominal frequency <br />Extended frequency range <br />Max units per 20 A (L-L) branch circuit4 <br />Total harmonic distortion <br />Overvoltage class AC port <br />AC port backfeed current <br />Power factor setting <br />Grid-tied power factor (adjustable) <br />Peak efficiency <br />CEC weighted efficiency <br />Night-time power consumption <br />MECHANICAL DATA <br />Ambient temperature range <br />Relative humidity range <br />DC Connector type <br />Dimensions (HxWxD) <br />Weight <br />Cooling <br />Approved for wet locations <br />Acoustic noise at 1 m <br />Pollution degree <br />Enclosure <br />Environ. category/ UV exposure rating <br />COMPLIANCE <br />Certifications <br />VA <br />VA <br />V <br />A <br />Hz <br />Hz <br />mA <br />% <br />% <br />mW <br />330 <br />325 <br />1.35 <br />97.6 <br />97 <br />240/ 211-264 <br />60 <br />5 0 -68 <br />11 <br /><5% <br />Ill <br />30 <br />1.0 <br />0.85 leading - O.85 lagging <br />60 <br />4% to 100% (condensing) <br />MC4 <br />212 mm (8.3") x 175 mm (6.9") x 30.2 mm (1.2") <br />1.08 kg (2.38 lbs) <br />Natural convection - no fans <br />Yes <br /><60 dBA <br />PD3 <br />366 <br />349 <br />1.45 <br />97.6 <br />97.5 <br />Class II double-insulated, corrosion resistant polymeric enclosure <br />NEMA Type 6 I outdoor <br />CA Rule 21 (UL 1741-SA), UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-OOO3 Class B, CAN/CSA-C22.2 NO. 107.1-01 <br />This product is UL Listed as PV Rapid Shut Down Equipment and conforms with NEC 2014, NEC 2017, and NEC 2020 section <br />690.12 and C22.1-2O18 Rule 64-218 Rapid Shutdown of PV Systems, for AC and DC conductors, when installed according to <br />manufacturer's instructions. <br />(1) No enforced DC/AC ratio. See the compatibility calculator at https://link.enphase.com/ <br />module-compatibility (2) Maximum continuous input DC current is 1O.6A (3) Nominal voltage <br />range can be extended beyond nominal if required by the utility. (4) Limits may vary. Refer to <br />local requirements to define the number of microinverters per branch in your area. 108MA-DS-OOO3-O1-EN-US-2O21-1O-19 <br />1020 S Shawnee <br />Dr05/16/23