Laserfiche WebLink
STATE OF CALIFORNIA <br />Outdoor Lighting CALIFORNIA ENERGY COMMISSION <br />CERTIFICATE OF COMPLIANCE NRCC-LTO-E <br />Project Name: Mater Dei High School - Dance Studio Report Page: (Page 3 of 7) <br />Date Prepared: 9/6/2023 <br />Generated Date/Time:Documentation Software: EnergyPro <br />CA Building Energy Efficiency Standards - 2022 Nonresidential Compliance Report Version: 2022.0.000 <br />Schema Version: rev 20220101 <br />Compliance ID: EnergyPro-2945-0923-1392 <br />Report Generated: 2023-09-06 08:43:18 <br />F. OUTDOOR LIGHTING FIXTURE SCHEDULE <br />For new or altered lighting systems demonstrating compliance with 140.7 / 170.2(e)6 all new luminaires being installed and any existing luminaires remaining or being moved within <br />the spaces covered by the permit application are included in the Table below. For altered lighting systems using the Existing Power method per 141.0(b)2L only new luminaires being <br />installed and replacement luminaires being installed as part of the project scope are included (ie, existing luminaires remaining or existing luminaires being moved are not included). <br />Outdoor lighting attached to multifamily buildings and controlled from the inside of a dwelling unit are included in Table H. and are not included here. All other multifamily outdoor <br />lighting is included here. <br />Designed Wattage: <br />01 02 03 04 05 06 07 08 09 10 <br />Name or Item <br />Tag Complete Luminaire Description Watts per <br />luminaire1, 2 <br />How is <br />Wattage <br />determined <br />Total Number <br />Luminaires 2 <br />Luminaire <br />Status3 <br />Excluded per <br />140.7(a) / <br />170.2(e)6A <br />Design Watts <br />Cutoff Req. > <br />6,200 initial <br />lumen output <br />130.2(b) / <br />160.5(c)14 <br />Field <br />Inspector <br />Pass Fail <br />2 Type 2 - Surface Mtd Wall <br />Pack Linear 25 Mfr. Spec 6 New 150 NA: < 6200 <br />lumens <br />Total Design Watts:150 <br />* NOTES: Selections with a * require a note in the space below explaining how compliance is achieved. <br />EX: Luminaire is lighting a statue; EXCEPTION 2 to 130.2(b) <br />1FOOTNOTES: Authority Having Jurisdiction may ask for Luminaire cut sheets to confirm wattage used for compliance per 130.0(c) / 160.5(b) <br />2 For linear luminaires, wattage should be indicated as W/lf instead of Watts/luminaire. Total linear feet should be indicated in column 05 instead of number of luminaires. <br />3 Select "New" for new luminaires in a new outdoor lighting project, or for added luminaires in an alteration. Select "Altered" for replacement luminaires in an alteration. Select "Existing to Remain" <br />for existing luminaires within the project scope that are not being altered and are remaining. Select "Existing Reinstalled" for existing luminaires which are being removed and reinstalled as part of <br />the project scope. <br />4 Compliance with mandatory shielding requirements is required for luminaires with initial lumen output >= 6,200 unless exempted by 130.2(b)/ 160.5(c) <br />G. SHIELDING REQUIREMENTS (BUG) <br />This section does not apply to this project. <br />1202 W Edinger <br />Ave10/3/2024