Laserfiche WebLink
L1 <br />L2 <br />SOURCE CIRUIT #1 <br />18 MODULES <br />X21-350-BLK-E-AC <br />SUNPOWER <br />NEMA 3R, <br />240VAC <br />JUNCTION BOX <br />2 <br />CONDUIT MUST BE <br />SUPPORTED A MINIMUM <br />OF 7/8" ABOVE THE ROOF <br />SURFACE. <br />SUNPOWER <br />QUAD <br />15A/20A <br />(3) #10 THWN <br />(1)#10 THWN EGC <br />SUNPOWER PVS6 <br />MONITORING <br />L1L2N <br />MLO <br /> SUBPANEL <br /> BUS RATED <br />240 VAC, 1Ø <br />EX <br />I <br />S <br />T <br />I <br />N <br />G <br />100A <br />(E) <br /> MAIN SERVICE PANEL <br /> BUS RATED <br />DUAL METER <br />240 VAC, 1Ø, 3W <br />POINT OF INTERCONNECTION <br />LOAD SIDE 705.12(B)(2)(3)(b) <br />M <br />M <br />(E) <br />200A <br /> 100A <br />OV <br />E <br />R <br />H <br />E <br />A <br />D <br />SE <br />R <br />V <br />I <br />C <br />E <br />EXISTING BUILDING <br />GROUNDING <br />ELECTRODE SYSTEM <br />NOTE: <br />PHOTOVOLTAIC MODULE HAS AN <br />INTEGRATED MICROINVERTER. <br />MAX PV BREAKER: <br />100A x 120% - 100 = 20A <br />CONDUCTOR AND CONDUIT SCHEDULE <br />TAG CONDUCTOR CURRENT CARRYING <br />CONDUCTORS IN CONDUIT EGC CONDUIT OCPD <br />1 <br />2 <br />12 AWG PV WIRE, COPPER <br />10 AWG AWG THWN-2 <br />N/A <br />2 <br />6 AWG BARE, COPPER <br />8 AWG AWG THWN-2 <br />FREE AIR <br />3/4" DIA. EMT <br />N/A <br />20A <br />USE SUNPOWER INTEGRATED GROUNDING TO <br />GROUND ALL MODULES, JUNCTION BOXES AND <br />ANY OTHER METAL PARTS AND GROUND LUGS <br />WITH #6 AWG SOLID COPPER WHERE NEEDED <br />NOTE: <br />THE INVISIMOUNT SYSTEM IS LISTED TO UL2703 FOR <br />INTEGRATED GROUNDING; SUNPOWER AC MODULES ARE A <br />BONDING COMPONENT AND ARE LISTED TO UL1741. <br />INSTALLING SUNPOWER AC MODULES ON THE INVISIMOUNT <br />SYSTEM (OR ANY MOUNTING SYSTEM THAT IS LISTED TO <br />UL2703 FOR BONDING-NOT JUST FOR FIRE CLASSIFICATION), <br />NO ADDITIONAL GROUNDING HARDWARE, LUGS, OR COPPER <br />WIRE ARE REQUIRED ON THE ROOF. SEE INVISIMOUNT <br />SPECSHEET PAGES WITHIN THIS PLAN SET. <br />ECOSOLAR USA <br />ELECTRICAL LLC <br />13962 SEABOARD CIRCLE <br />GARDEN GROVE, CA 92840 <br />PH: 714.265.9077 <br />SCOPE OF WORK: <br />DAVID Q HOANG C10 - 1045300 <br />DATE: <br />DRAWN BY: <br />HOMEOWNER: <br />ADDRESS: <br />CHECKED BY: <br />R.A. <br />S.C.INSTALL (8) X21-350-BLK-E-AC SOLAR ELECTRIC MODULES ON THE EXISTING 1ST STORY <br />COMP SHINGLE ADU ROOF. INSTALL ASSOCIATED MOUNTING HARDWARE, JUNCTION <br />BOXES, CONDUIT, CONDUCTORS AND GROUNDING. CONNECT TO THE (N)20A BREAKER <br />CONNECTED TO THE EXISTING ADU PANEL. 15A/20A QUAD BREAKER IS REQUIRED. <br />VINH NGUYEN <br />(714)589-4612 <br />11.25.2022 <br />1106 E BUFFALO AVE., UNIT 2 <br />SANTA ANA, CA, 92704 <br />ELECTRICAL LINE DIAGRAM <br />PV2 <br />1106 E Buffalo Ave <br />Unit #201/17/23