Laserfiche WebLink
Document #524734 Rev F, Vol. 12 4 SunPower Proprietary <br />MModule Mounting Locations (A-Series & M-Series): <br />x Each cell in the tables below is color coded to indicate the areas on the module where clamps may be <br />installed. The load capacity of the module is dependent on the clamp location, and the corresponding <br />capacities have been cross-referenced with the calculated load demand. The definitions of the colors and <br />their corresponding mounting locations are shown in the diagram and key below. All dimensions are in <br />[inches]. <br />Key <br />Color Allowable Mounting Location <br />Green ALL allowable Landscape + Portrait locations <br />Orange ALL Portrait locations <br />Blue ONLY Portrait locations within given dimensions above <br />Figure 3 <br />x The centerline of rails may never be installed outside of the shown allowable mounting locations. <br />x The mounting location zones are symmetric across the centerlines shown in the diagram. <br />x Only applicable to SunPower A-Series and M-Series 66-cell module. <br />x Please contact SunPower for any further technical information which may be required. <br />1314 S <br />Dr09/05/23