|
CONTRACTOR INFORMATION
<br />CONTRACTOR:DVD CONSTRUCTION
<br />ADDRESS:6500 E. CARNEGIE AVE., ANAHEIM, CA 92807
<br />PHONE: 949-864-9986
<br />LICENSE #/TYPE: 1029241 / A , B
<br />TABLE OF CONTENTS
<br />PAGE 1 COVER PAGE
<br />PAGE 2 SITE PLAN
<br />PAGE 3 PLOT PLAN
<br />PAGE 4 SINGLE LINE DIAGRAM
<br />PAGE 5 STRUCTURAL ATTACHMENT DETAIL
<br />PAGE 6 LABELS AND WARNING SIGNAGE
<br />PAGE 7 PV MODULE SPEC SHEET
<br />PAGE 8 INVERTER SPEC SHEET
<br />PAGE 9 UL LISTING
<br />PAGE 10 GROUNDING
<br />PAGE 11 RAPID SHUTDOWN
<br />SYSTEM INFORMATION
<br />SIZE(kw): 8.550 kW (DC) / 7.706 kW (CEC-AC)
<br />MODULE TYPE: 19 CANADIAN SOLAR CS3W-450MB-AG
<br />INVERTERS(S): 19 ENPHASE IQ8M-60-72-US
<br />INVERTER TYPE: MICRO-INVERTER
<br />SCOPE OF WORK
<br />INSTALL
<br />(19) ROOF MOUNTED PV SOLAR MODULES,
<br />(19) ENPHASE IQ8M-60-72-US INVERTER(S)(240V).
<br />DV
<br />D
<br />
<br />C
<br />O
<br />N
<br />S
<br />T
<br />R
<br />U
<br />C
<br />T
<br />I
<br />O
<br />N
<br />65
<br />0
<br />0
<br />
<br />E
<br />.
<br />
<br />C
<br />A
<br />R
<br />N
<br />E
<br />G
<br />I
<br />E
<br />
<br />A
<br />V
<br />E
<br />.
<br />
<br />A
<br />N
<br />A
<br />H
<br />E
<br />I
<br />M
<br />,
<br />
<br />C
<br />A
<br />
<br />9
<br />2
<br />8
<br />0
<br />7
<br />PH
<br />O
<br />N
<br />E
<br />:
<br />
<br />9
<br />4
<br />9
<br />-
<br />8
<br />6
<br />4
<br />-
<br />9
<br />9
<br />8
<br />6
<br />LI
<br />C
<br />E
<br />N
<br />S
<br />E
<br />:
<br />
<br />1
<br />0
<br />2
<br />9
<br />2
<br />4
<br />1
<br />
<br />/
<br />
<br />A
<br />
<br />,
<br />
<br />B
<br />Co
<br />n
<br />t
<br />r
<br />a
<br />c
<br />t
<br />o
<br />r
<br />'
<br />s
<br />
<br />S
<br />i
<br />g
<br />n
<br />a
<br />t
<br />u
<br />r
<br />e
<br />:
<br />
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />_
<br />Pr
<br />o
<br />j
<br />e
<br />c
<br />t
<br />
<br />N
<br />a
<br />m
<br />e
<br />8.
<br />5
<br />5
<br />0
<br />
<br />k
<br />W
<br />
<br />(
<br />D
<br />C
<br />)
<br />
<br />/
<br />
<br />7
<br />.
<br />7
<br />0
<br />6
<br />
<br />k
<br />W
<br />
<br />(
<br />C
<br />E
<br />C
<br />-
<br />A
<br />C
<br />)
<br />Ph
<br />o
<br />t
<br />o
<br />v
<br />o
<br />l
<br />t
<br />a
<br />i
<br />c
<br />
<br />S
<br />y
<br />s
<br />t
<br />e
<br />m
<br />RA
<br />Y
<br />M
<br />A
<br />R
<br />
<br />R
<br />E
<br />S
<br />I
<br />D
<br />E
<br />N
<br />C
<br />E
<br />1
<br />3
<br />0
<br />6
<br />
<br />R
<br />A
<br />Y
<br />M
<br />A
<br />R
<br />
<br />S
<br />T
<br />.
<br />,
<br />SA
<br />N
<br />T
<br />A
<br />
<br />A
<br />N
<br />A
<br />,
<br />
<br />C
<br />A
<br />
<br />
<br />92
<br />7
<br />0
<br />3
<br />DA
<br />T
<br />E
<br />:
<br />1
<br />0
<br />/
<br />1
<br />2
<br />/
<br />2
<br />0
<br />2
<br />2
<br />DR
<br />A
<br />W
<br />N
<br />
<br />B
<br />Y
<br />:
<br />AA
<br />RE
<br />V
<br />I
<br />S
<br />I
<br />O
<br />N
<br />S
<br />:
<br />Page
<br />Title Block 11x17
<br />PROJECT INFORMATION
<br />NAME:RAYMAR RESIDENCE
<br />ADDRESS:1306 RAYMAR ST., SANTA ANA, CA 92703
<br />APN:010-022-27
<br />JURISDICTION: CITY OF SANTA ANA
<br />OCCUPANCY GROUP: R3
<br />CONSTRUCTION TYPE: V-B
<br />CO
<br />V
<br />E
<br />R
<br />
<br />P
<br />A
<br />G
<br />E
<br />· ALL MATERIALS, EQUIPMENT, INSTALLATION AND WORK PERFORMED SHALL
<br />BE IN ACCORDANCE WITH THE FOLLOWING CODES:
<br />- 2019 CBC / 2018 IBC
<br />- 2019 CRC / 2018 IRC
<br />- 2019 CEC / 2017 NEC
<br />- 2019 CMC / 2018 IMC
<br />- 2019 CPC / 2018 IPC
<br />- 2019 CFC / 2018 IFC
<br />- 2019 BUILDING ENERGY EFFICIENCY STANDARDS
<br />· ALL EQUIPMENT SHALL BE LISTED AND LABELED BY A RECOGNIZED
<br />ELECTRICAL TESTING LABORATORY AND L.A. TEST LAB. EQUIPMENT
<br />INSTALLED SHALL BE PER ITS LISTING REQUIREMENTS AND THE
<br />MANUFACTURER'S INSTRUCTIONS. NEC 110.2, 110.3, 690.4(B), 690.12(D).
<br />· ALL OUTDOOR EQUIPMENT SHALL BE NEMA 3R RATED, INCLUDING ALL ROOF
<br />MOUNTED TRANSITION BOXES AND SWITCHES.
<br />· ALL EQUIPMENT SHALL BE PROPERLY GROUNDED AND BONDED IN
<br />ACCORDANCE WITH NEC ARTICLE 250.
<br />· ALL PV CIRCUITS CONNECTED AND EQUIPMENT SHALL BE PROTECTED
<br />AGAINST OVERCURRENT. OVERCURRENT DEVICES SHALL BE LISTED FOR
<br />USE IN PV SYSTEMS. OVERCURRENT PROTECTIVE DEVICES SHALL NOT BE
<br />REQUIRED FOR CIRCUITS WITH SUFFICIENT AMPACITY FOR THE HIGHEST
<br />AVAILABLE CURRENT. CIRCUITS CONNECTED TO CURRENT LIMITED
<br />SUPPLIES AND ALSO CONNECTED TO SOURCES HAVING HIGHER CURRENT
<br />AVAILABILITY SHALL BE PROTECTED AT THE HIGHER CURRENT SOURCE
<br />CONNECTION. [NEC 690.9]
<br />· DISCONNECTING MEANS OF THE PV SYSTEM (INCLUDING RAPID SHUTDOWN
<br />INITIATION) SHALL BE LOCATED IN A READILY ACCESSIBLE LOCATION NEAR
<br />THE EQUIPMENT. [NEC 690.13,690.15]
<br />· RAPID SHUTDOWN EQUIPMENT TO COMPLY WITH NEC 690.12.
<br />· ENERGY STORAGE SYSTEM TERMINALS LOCATED MORE THAN 5 FEET AWAY
<br />OR ON OPPOSITE SIDE OF WALL FROM CONNECTED EQUIPMENT MUST HAVE
<br />DISCONNECTING MEANS IN ACCORDANCE WITH NEC 706.7(E) AND LABELED
<br />PER 706.7(D). OVERCURRENT PROTECTION SHALL BE PROVIDED PER
<br />706.21(F).
<br />· THE UTILITY-INTERACTIVE INVERTERS SHALL AUTOMATICALLY DE-ENERGIZE
<br />ITS OUTPUT TO THE CONNECTED ELECTRICAL PRODUCTION AND
<br />DISTRIBUTION NETWORK VOLTAGE HAS BEEN RESTORED. [NEC 705.40]
<br />· ALL CONDUCTORS IN EXPOSED OUTDOOR LOCATIONS SHALL BE LISTED AND
<br />IDENTIFIED FOR USE IN DIRECT SUNLIGHT AND FOR THE APPLICATION. [NEC
<br />690.31(C) THROUGH (F), 310.10(D)]
<br />· INSULATION OF EXPOSED CONDUCTORS UNDER THE MODULES SHALL BE
<br />USE-2 OR PV-WIRE TYPE FOR PV SYSTEMS (UL 4703 & 854 LISTED) [NEC
<br />690.31(C)]
<br />· FINE-STRANDED CABLE CONNECTIONS MUST BE MADE IN LUGS AND
<br />TERMINALS TO ENSURE A THOROUGHLY GOOD CONNECTION WITHOUT
<br />DAMAGING THE CONDUCTORS. [NEC 110.14(A)]
<br />· FLEXIBLE, FINE-STRANDED CABLES SHALL BE TERMINATED ONLY WITH
<br />TERMINALS, LUGS, DEVICES, OR CONNECTORS THAT ARE IDENTIFIED AND
<br />LISTED FOR SUCH USE. [NEC 690.31(H), 110.14]
<br />· ALL PV CIRCUIT CONDUCTORS SHALL BE MARKED ON EACH END AND
<br />GROUPED FOR UNIQUE IDENTIFICATION. [NEC 690.31(B)]
<br />· ALL EXTERIOR CONDUIT, FITTINGS, AND BOXES SHALL BE RAIN TIGHT AND
<br />APPROVED FOR USE IN WET LOCATIONS. (NEC 314.15)
<br />· ALL GROUNDED, (NEUTRAL), CONDUCTORS' INSULATION SHALL BE SOLID
<br />WHITE, GRAY, OR WITH 3-WHITE STRIPES. [NEC 200.6, 200.7, 400.22; ALL
<br />GROUNDING CONDUCTORS SHALL BE OF BARE WIRE WITHOUT COVERING,
<br />OR WITH INSULATION OF GREEN OR GREEN WITH YELLOW STRIPES, NEC
<br />250.119 & 400.23. THE COLOR OF UNGROUNDED CONDUCTORS SHALL BE
<br />OTHER THAN FOR GROUNDED, (NEUTRAL), AND GROUNDING CONDUCTORS.
<br />[NEC 310.110(C)]
<br />· MAXIMUM CONDUCTOR LENGTH BETWEEN SUPPLY SIDE CONNECTION AND
<br />OVERCURRENT PROTECTION IS 10FT. [NEC 705.31]
<br />· CONNECTIONS ON THE LOAD SIDE OF THE SERVICE DISCONNECTING MEANS OF
<br />THE OTHER SOURCE(S) AT ANY DISTRIBUTION EQUIPMENT ON THE PREMISES
<br />SHALL BE IN ACCORDANCE WITH NEC 705.12(B).
<br />· DC WIRING INSIDE A BUILDING MUST BE IN METALLIC TYPE RACEWAYS, CONDUITS,
<br />ENCLOSURES, OR CABLE SHEATHINGS. [NEC 690.31(G)]
<br />· METALLIC TYPE RACEWAYS, CONDUITS, ENCLOSURES, AND CABLE SHEATHS
<br />CONTAINING CIRCUITS OVER 250-VOLTS TO GROUND MUST BE BONDED IN
<br />ACCORDANCE WITH NEC 250.97.
<br />· CONNECTORS SHALL BE OF LATCHING OR LOCKING TYPE. CONNECTORS THAT ARE
<br />READILY ACCESSIBLE AND OPERATING AT OVER 30-VOLTS SHALL REQUIRE A TOOL
<br />TO OPEN AND MARKED "DO NOT DISCONNECT UNDER LOAD" OR "NOT FOR
<br />CURRENT INTERRUPTING." [NEC 690.33(C) & (E)(2)]
<br />· FOR PV MODULES, EQUIPMENT GROUNDING CONDUCTOR (EGC) SMALLER THAN
<br />#6-AWG SHALL BE PROTECTED FROM PHYSICAL DAMAGE BY AN IDENTIFIED
<br />RACEWAY OR CABLE ARMOR, UNLESS INSTALLED WITHIN HOLLOW SPACES OF THE
<br />FRAMING MEMBERS OF BUILDINGS OR STRUCTURES AND WHERE NOT SUBJECT TO
<br />PHYSICAL DAMAGE. [NEC 690.46, 250.120(C)]
<br />· THE INTERCONNECTION POINT SHALL BE ON THE SUPPLY SIDE OF ALL
<br />GROUND-FAULT PROTECTION EQUIPMENT. [NEC 705.32]
<br />· CABLES/WIRES THAT ARE SUBJECT TO PHYSICAL DAMAGE, SUCH AS THOSE NOT
<br />LOCATED UNDER THE MODULES, MUST BE PROTECTED. [NEC 300.4]
<br />· FOR ELECTRICAL SERVICE REPLACEMENTS, BONDING TO THE METAL PIPES OF
<br />NATURAL GAS, HOT WATER, AND COLD WATER MUST BE PROVIDED. [NEC 250.104]
<br />· GROUNDING ROD ELECTRODES SHALL BE INSTALLED 8-FT MINIMUM IN CONTACT
<br />WITH SOIL AND MINIMUM 5/8-INCH DIAMETER. [NEC 250.52(A)(5), 250.53(G)]
<br />· THE MARKINGS, "WARNING: PHOTOVOLTAIC POWER SOURCE", FOR DC RACEWAYS
<br />AND CABLE ASSEMBLIES MUST BE NO MORE THAN 10-FT O.C.; AND IS SEPARATED
<br />BY ENCLOSURES, WALLS, PARTITIONS, CEILINGS, FLOORS, OR BENDS ABOVE OR
<br />BELOW PENETRATIONS. [NEC 690.31(G)(3)&(4)]
<br />· WORKING CLEARANCES TO BE PROVIDED AT NEW AND EXISTING ELECTRICAL
<br />EQUIPMENT. [NEC 110.26]
<br />· POWER PRODUCTION SYSTEMS, AND ALL ASSOCIATED WIRING AND
<br />INTERCONNECTIONS OPERATING IN PARALLEL WITH A PRIMARY POWER SOURCE
<br />SHALL BE PERFORMED ONLY BY QUALIFIED PERSONS. [NEC 690.4(C), 705.8]
<br />· LABELS SHALL BE REFLECTIVE, AND ALL LETTERS SHALL BE CAPITALIZED AND
<br />SHALL BE A MINIMUM HEIGHT OF 3/8" IN WHITE ON A RED BACKGROUND. [NEC
<br />690.31(G)(4)
<br />· IDENTIFICATION OF POWER SOURCE RAPID SHUTDOWN AND LABELING SHALL BE IN
<br />ACCORDANCE WITH NEC 690.56(C).
<br />· SMOKE ALARMS AND CARBON MONOXIDE ALARMS ARE REQUIRED TO BE
<br />RETROFITTED ONTO THE EXISTING DWELLING AS PER THE 2019 CRC. THESE
<br />SMOKE ALARMS ARE REQUIRED TO BE IN ALL BEDROOMS, OUTSIDE EACH
<br />BEDROOM, AND AT LEAST ONE ON EACH FLOOR OF THE HOUSE. CARBON
<br />MONOXIDE ALARMS ARE REQUIRED TO BE RETROFITTED OUTSIDE EACH BEDROOM
<br />AND AT LEAST ONE ON EACH FLOOR OF THE HOUSE. (CRC 314,315)
<br />· SMOKE ALARMS AND CARBON MONOXIDE ALARMS ARE REQUIRED PER CRC
<br />SECTIONS 314 AND 315 TO BE VERIFIED AND INSPECTED BY THE INSPECTOR IN THE
<br />FIELD.
<br />· A LADDER MUST BE PROVIDED FOR INSPECTIONS IN ACCORDANCE WITH Cal-OSHA
<br />REGULATIONS, SECURED AND EXTENDING 3-FT ABOVE THE ROOF.
<br />· ·ALL OF THE REQUIRED MARKINGS, SIGNS, AND LABELS MUST BE INSTALLED ON
<br />ALL EQUIPMENT PRIOR TO ANY INSPECTIONS.
<br />01 OF 11
<br />PHOTOVOLTAIC MODULES AND PANEL SYSTEMS INSTALLED ON OR INTEGRAL WITH BUILDINGS, OR TO
<br />BE FREESTANDING (NOT ATTACHED TO BUILDINGS) SHALL BE TESTED, LISTED, AND IDENTIFIED WITH
<br />A FIRE CLASSIFICATION (CLASS C MINIMUM) IN ACCORDANCE WITH UL1703. WHERE CLASS A OR B
<br />ROOFING IS REQUIRED, THE PV SOLAR SYSTEM (PV PANEL & RACK) SHALL HAVE THE SAME
<br />CLASS/TYPE RATING OR BETTER.
<br />PHOTOVOLTAIC GENERAL NOTES
<br />Bldg permit #101112706
<br />Elect permit #20177905
<br />Permits issued on 11/11/22
<br />1306 W Raymar St
<br />11/14/22
|