Laserfiche WebLink
<br /> <br />Document #524734 Rev G, Vol. G 29 SunPower Proprietary <br /> <br />InvisiMount Span Tables <br /> <br />Part 2: General Tables (ASCE 7 Analytical Method) <br /> <br />How to Use These Tables <br />x Determine the snow load and roof height for the site and select the corresponding table. <br />x Determine the wind speed and roof slope for the site. The value in the table, for this wind speed and roof <br />slope, is the allowable span between attachment points, in inches. <br />x See figure below for locations of zones 1, 2 and 3. Dimension “a” is 10% of the least horizontal dimension <br />or 0.4h, whichever is smaller, but not less than either 4% of the least horizontal dimension or 3 feet. <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />1402 W Meriday Ln - <br />201816051/10/2024