Laserfiche WebLink
Number: 1900 <br /> <br />Originally Issued: 01/15/2016 Revised: 03/07/2023 Valid Through: 01/31/2026 <br /> <br />Page 2 of 6 <br />installation shall be in accordance with the applicable code, <br />the Concrete and Clay Roof Tile Installation Manual dated <br />July 2015, published by the Tile Roofing Institute and the <br />Western States Roofing Contractors Association, and this <br />report. In the event of a conflict, provisions of this report <br />govern. The TRI manual is available for download attached <br />to ER-2015 from the UES website at www.uniform-es.org. <br />The Eagle roof tiles and Eaglelite roof tiles are similar in <br />production except that the Eaglelite tiles are produced with <br />lightweight aggregates in lieu of sand. Figure 1 of this report <br />includes typical profiles of the Eagle roof tiles. <br /> <br />4.2 Fire Classification: Eagle Roofing Product’s Concrete <br />Roof Tiles, when installed in accordance with this report on <br />minimum 15/32-inch-thick (12 mm) plywood solid sheathing <br />or non- combustible decks, the assembly incorporating the <br />roof tiles achieve an ASTM E108 Class A rating accordance <br />with Section 1505.2 of the IBC and Section R902.1 of the <br />IRC, as applicable. Roof classifications for adhesively <br />attached systems shall be in accordance with the adhesive <br />manufacturer’s approved research report. <br /> <br />5.0 IDENTIFICATION <br /> <br />Shipping pallets are identified with the report holder’s name <br />(Eagle Roofing Products), manufacturing location address, <br />product name, installed weight, shift and date of production, <br />the UES Mark of conformity and evaluation report number <br />(ER-1900). The tiles produced in the Sumterville, Florida, <br />manufacturing facility are additionally identified with <br />“Florida” imprinted on each tile. Either UES Mark of <br />Conformity may also be used as shown below: <br /> <br /> <br /> <br />or <br /> <br /> <br /> <br />IAPMO UES ER-1900 <br /> <br />6.0 SUBSTANTIATING DATA <br /> <br />Data in accordance with ICC-ES AC180, manufacturer’s <br />descriptive literature and installation instructions. Test <br />reports are from laboratories in compliance with ISO/IEC <br />17025. Eagle Roofing Product’s Concrete Roof Tiles are <br />manufactured in the facilities specified in Tables 2A through <br />2C of this report, under a quality control program. <br /> <br />7.0 STATEMENT OF RECOGNITION <br /> <br />This evaluation report describes the results of research <br />completed `by IAPMO Uniform Evaluation Service on Eagle <br />Roofing Product’s Concrete Roof Tiles to assess its <br />conformance to the codes and standards shown in Section 1.0 <br />of this report and documents the product’s certification. <br />Products are manufactured at the locations noted in Section <br />2.5 of this report under a quality control program with <br />periodic inspections under the supervision of IAPMO UES. <br /> <br />For additional information about this evaluation report please visit <br />www.uniform-es.org or email us at info@uniform-es.org <br /> <br /> <br /> <br /> <br />