|
This Verification is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and
<br />conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
<br />Verification. Only the Client is authorized to permit copying or distribution of this Verification. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material,
<br />product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Verification are relevant only to the sample tested/inspected. This
<br />Verification by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program .
<br />Test Verification of Conformity
<br />Verification Number: 105370452-LAX-VOC1
<br />Applicant Name & Address: SunPower Corporation
<br />1414 Harbour Way South
<br />Suite 1901
<br />Richmond, CA 94804 USA
<br />Photovoltaic Racking System installed using the SunPower InvisiMount Installation
<br />Guide 508988 Rev O
<br />Fire Class Rating:
<br />Class A for Type 1 and Type 2
<br />Fuse Rating: 20 A
<br />Mechanical Load Testing:
<br />Mechanical Load Rating: 10PSF Downward, 5PSF Upward, 5PSF Sloped Load
<br />Module Orientation: Portrait or Landscape
<br />Classic InvisiMount, Universal InvisiMount
<br />; InvisiMount
<br />Product Description:
<br />Ratings & Principle
<br />Characteristics:
<br />Models/Type References:
<br />Brand Name:
<br />Relevant Standards:
<br />Verification Issuing Office
<br />Name & Address:
<br />Date of Tests:
<br />Test Report Number(s):
<br />Mounting Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs
<br />for Use with Flat-Plate Photovoltaic Modules and Panels [UL 2703:2015
<br />Ed.1+R:24Mar2021]
<br />Intertek Testing Services NA, Inc.
<br />25800 Commercentre Drive
<br />Lake Forest, CA 92630 USA
<br />September-27-2022 to October-11-2022
<br />105208800LAX-001
<br />Signature
<br />Name: Abdullah Alharbi
<br />Position: PV Engineer
<br />Date: 12 April 2023
<br />On the basis of the tests undertaken, the samples of the below product have been found to comply with the
<br />requirements of the referenced specification/standard at the time the tests were carried out. This verification is part
<br />of the full test report 105208800LAX-001 and should be read in conjunction with it. This verification replaces
<br />previous verification number 105208800LAX-001-LAX-VOC1 dated: 30-12-2022. Additional information in Appendix.
<br />This Verification is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and
<br />conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
<br />Verification. Only the Client is authorized to permit copying or distribution of this Verification. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material,
<br />product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Verification are relevant only to the sample tested/inspected. This
<br />Verification by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program .
<br />APPENDIX: Test Verification of Conformity
<br />Approved Module list
<br />Module Manufacturer Model
<br />SunPower Corporation
<br />SPR-XYY-###-(COM), where X can be E or A denoting cell type, where YY represents
<br />numbers 18, 19, 20,21, or blanks and ### represents any number from 450 to 310 and
<br />274 to 233;
<br />SPR-EYY-###, where YY represents numbers 18, 19, 20 or 21, and ### represents any
<br />number from 345 to 285 and 250 to 225.
<br />SPR-MXXX & SPR-MAX6-XXX, may be followed by -BLK, where XXX is 385-440.
<br />SPR-E or SPR-X followed by 18, 19, 20, 21, 22, followed by - XXX where XXX is 320-370,
<br />may be followed by -BLK, followed by C, D, E, may be followed by -AC
<br />SPR-XXXE/NE-WHT/BLK-U-YYYACPV and SPR-V-WW-XXX-Y-Z-G-AC, where "XXX" is the
<br />wattage of the panel and ranges from 250 to 225; and where "YYY" indicates the
<br />inverter voltage used in the module, and can be blank, 240 or 208/240.
<br />SPR-AXXX-G-AC or SPR-AXXXBLK-G-AC Where XXX denotes output power. G
<br />denotes inverters. BLK represents backsheet color. AC indicates AC module.
<br />SPR-AXXX-H-AC where XXX is the wattage range of 350 to 425, H Denotes the
<br />inverter, and AC indicates AC modules.
<br />SPR-MXXX-YYY-Z-AC, where XXX is 380-440
<br />All models identified must have the Gen 5 frame and have a module fire performance: Type 2
<br />SunPower Corporation
<br />72-cell model with Gen 4.2 frame only: SPR-AXXX-COM or SPR-MAX5-XXX-COM, may be
<br />followed by BLK, where XXX is 380-460
<br />66-cell model with Gen 4.2 frame only: SPR-AXXX, may be followed by -COM, and/or -
<br />300V, followed by MLSD, where XXX is 350-425.
<br />72-cell model with Gen 4.2 frame only: SPR-AXXX, may be followed by -COM, and/or -
<br />300V, followed by MLSD, where XXX is 430-60
<br />SPR-UXXX-BLK, where XXX is 395-415
<br />Hanwha
<br />Q.PEAK DUO BLK ML-G10.a+ XXX, where XXX is 370-425
<br />Q.PEAK DUO BLK-G10+ XXX, where XXX is 350370
<br />Q.PEAK DUO BLK ML-G10+ XXX, where XXX is 385-405
<br />REC
<br />RECxxxNP2, may be followed by Black, where xxx is 350-380.
<br />RECxxxTP4, may be followed by Black, where xxx is 355-380.
<br />RECxxxAA Black, where xxx is 340-385.
<br />This is an Appendix to Test Verification of Conformity Number: 105370452-LAX-VOC1.
<br />2105 N Poinsettia
<br />St08/28/23
|