Laserfiche WebLink
Design Responsibility: <br />These tables are intended to be used under the responsible charge of a registered design professional where <br />required by the authority having jurisdiction. In all cases, these tables should be used under the direction of a <br />design professional with sufficient structural engineering knowledge and experience to be able to: <br />• Evaluate whether these tables are applicable to the project, and <br />• Understand and determine the appropriate values for all input parameters of these tables. <br />This letter certifies that the loading criteria and design basis SunPower Invisimount Mounting System Span <br />Tables are in compliance with the Codes above. <br />This certification excludes the capacity check of the building structure to support the loads imposed on the <br />building by the array, such as bending strength of roof rafters spanning between supports. This requires <br />additional knowledge of the building and is outside the scope of the design tool and our review. <br />If you have any questions on the above, do not hesitate to call. <br />Prepared By: <br />PZSE, Inc. - Structural Engineers <br />Roseville, CA <br />REENI <br />IGER <br />LARUTCURTS AINROFILACFOETATS <br />GNELANOISSEFORPDERETSEHCAZHT ENEKL <br />N <br />AP <br />Exp. 3-31-25 <br />No. S3878 <br />R <br />U <br />DIGITALLY SIGNED <br />2105 N <br />St08/28/23