|
ELECTRICAL SYMBOLSGENERAL NOTES
<br />H
<br />A
<br />O
<br />P
<br />VFD
<br />M
<br />F
<br />kWM
<br />WP
<br />C
<br />J
<br />PB
<br />GF
<br />ST
<br />GFP
<br />T
<br />TV
<br />VERIFY ALL LIGHT FIXTURES WITH OWNER/ ARCHITECT PRIOR TO BID.
<br />LIGHTS AND PANEL SHALL NOT BE RECESSED IN FIRE PLATED ASSEMBLIES
<br />UNLESS BOXED WITH EQUIVALENT CONSTRUCTION.
<br />NOTE:
<br />NOTE:LIGHT SWITCHES AND CONTROLS, WALL MOUNTED AT +48" AFF (MAX)
<br />ALL WALL COUNTER RECEPTACLE SHALL BE GFCI AND 6" ABOVE
<br />SPLASH. COORDINATE WITH ARCHITECTURAL DRAWINGS.
<br />NOTE:ALL WALL MOUNTED RECEPTACLE SHALL BE +18" AFF U.O.N.
<br />NOTE:ALL RATINGS OF ELECTRICAL DISTRIBUTION EQUIPMENT SHALL BE VERIFIED
<br />WITH LOCAL UTILITY COMPANY HAVING JURISDICTION PRIOR TO BID.
<br />ALL WALL SWITCHES CONTROL LINE EMERGENCY CIRCUITS SHALL
<br />BE ENGRAVED WITH "EMERGENCY" ON RED FACE PLATE
<br />ALL RATINGS OF ELECTRICAL DISTRIBUTION EQUIPMENT SHALL BE VERIFIED
<br />WITH LOCAL UTILITY COMPANY HAVING JURISDICTION PRIOR TO BID.
<br />NOTE:
<br />NOTE:VERIFY ALL COMMUNICATION REQUIREMENTS WITH SERVICE
<br />PROVIDER.
<br />LIGHTING FIXTURES
<br />WALL MOUNTED
<br />8' INDUSTRIAL STRIP LIGHT
<br />4' INDUSTRIAL STRIP LIGHT
<br />RECESSED DOWNLIGHT
<br />RECESSED WALL WASH
<br />VANITY LIGHT FIXTURE
<br />ROADWAY/PARKING LOT/WALKWAY LIGHT STANDARD
<br />PATHWAY LIGHT POST TOP MOUNTED
<br />BUILDING MOUNTED WALLPACK
<br />CEILING/PENDANT MOUNTED EXIT SIGN
<br />WALL MOUNTED EXIT SIGN
<br />SHADING INDICATES ILLUMINATED FACE OF EXIT SIGN
<br />ARROW INDICATES EXIT SIGN DIRECTIONAL ARROW
<br />SURFACE MOUNTED EMERGENCY LIGHT ON IT WITH 90 MIN.
<br />EMERGENCY BATTERY PACK. REFER TO LIGHTING FIXTURE
<br />SCHEDULE.
<br />LIGHT SWITCHES AND CONTROLS
<br />POWER RECEPTACLES AND BOXES
<br />DUPLEX RECEPTACLE
<br />QUAD RECEPTACLE
<br />SPECIAL RECEPTACLE
<br />DEDICATED 20A RECEPTACLE
<br />GFCI DUPLEX RECEPTACLE
<br />GFCI DUPLEX RECEPTACLE WITH WEATHERPROOF COVER
<br />AFCI DUPLEX RECEPTACLE
<br />DUPLEX RECEPTACLE, BOTTOM HALF SWITCHED
<br />AFCI DUPLEX RECEPTACLE, BOTTOM HALF SWITCHED
<br />GFCI DUPLEX RECEPTACLE 6" ABOVE COUNTER OR SPLASH
<br />DUPLEX CEILING RECEPTACLE
<br />DUPLEX FLOOR RECEPTACLE
<br />JUNCTION BOX
<br />PULLBOX, SIZED PER NEC OR AS NOTED
<br />DOOR CHIME
<br />LIGHTED LV PUSHBUTTON DOOR BELL
<br />TRANSFORMER (T)
<br />PANELBOARDS OR LOAD CENTERS: SURFACE, FLUSH MOUNTED
<br />REFER TO PANEL SCHEDULES
<br />DISTRIBUTION EQUIPMENT
<br />GROUND
<br />DELTA CONFIGURATION
<br />WYE CONFIGURATION
<br />GROUND FAULT PROTECTION
<br />GROUND FAULT RELAY
<br />SHUNT TRIP
<br />MOTOR CIRCUIT PROTECTOR 30A =
<br />AMPERE RATING MCP = MOTOR
<br />CIRCUIT PROTECTOR ALL BREAKERS
<br />ARE 3-POLE, UON.
<br />FUSED DISCONNECT SWITCH 30A =
<br />SWITCH AMPERE RATING (20A) =
<br />FUSE AMPERE RATING ALL SWITCHES
<br />ARE 3-POLE, UON.
<br />HAND-OFF-AUTO CONTROL STATION
<br />START-STOP CONTROL STATION
<br />DISCONNECT SWITCH FURNISHED W/ EQUIPMENT
<br />PANEL
<br />CURRENT LIMITER
<br />UTILITY COMPANY METER. PROVIDE CT'S & PT'S AS REQUIRED.
<br />REFER TO SINGLE LINE DIAGRAM.
<br />TRANSFORMER
<br />FUSE CUTOUT
<br />SINGLE LINE DIAGRAMS
<br />PACKAGED EQUIPMENT, SINGLE POINT ELECTRICAL CONNECTION,
<br />FURNISHED WITH INTEGRAL MAIN DISCONNECT UON.
<br />VARIABLE FREQUENCY DRIVE WITH INTEGRAL
<br />MAIN DISCONNECT
<br />MECHANICAL EQUIPMENT EXHAUST FAN OR MOTOR
<br />POWER EQUIPMENT
<br />NON-FUSED DISCONNECT SWITCH WITH FUSES PER EQUIPMENT
<br />MANUFACTURER AND WEATHER PROOF AS REQUIRED 30A =
<br />SWITCH AMPERE RATING ALL SWITCHES ARE 3-POLE UON.
<br />FUSED DISCONNECT SWITCH, HP RATED WITH FUSES PER
<br />EQUIPMENT MANUFACTURER AND WEATHER PROOF AS
<br />REQUIRED 30AS = SWITCH AMPERE RATING 15AF = FUSE
<br />AMPERE RATING ALL SWITCHES ARE 3-POLE UON.
<br />COMBINATION MOTOR STARTER/MOTOR CIRCUIT
<br />PROTECTOR 100A = AMPERE RATING MCP = MOTOR
<br />CIRCUIT PROTECTOR 1 = STARTER SIZE ALL
<br />BREAKERS ARE 3-POLE UON.
<br />POWER SWITCHES AND CONTROLS
<br />100A
<br />MCP
<br />1
<br />30AS
<br />15AF
<br />30A
<br />30A
<br />(20A)
<br />30A
<br />MCP
<br />COMMUNICATION DEVICES
<br />TERMINAL BOARD (TB) SIZED AS NOTED, REFER TO SYSTEM
<br />GROUND DETAIL AS REQUIRED
<br />TELEPHONE TERMINAL CABINET (TC) WITH TERMINAL
<br />STRIPS AS REQUIRED
<br />TELEPHONE OUTLET BOX, WALL MOUNTED AT +18" A.F.F. (MIN).
<br />STUB A 3/4" C.O. UP 6" ABOVE THE ACCESSIBLE CEILING AND
<br />PROVIDE A BUSHING. 4S/DP MINIMUM WITH SINGLE GANG RING.
<br />"W" = WALL MOUNTED PHONE AT +48" A.F.F. (MAX) "P" = PUBLIC
<br />(PAY) PHONE. VERIFY ALL REQUIREMENTS WITH THE TELEPHONE
<br />UTILITY COMPANY. PROVIDE 1" C.O. (MIN) TO THE MAIN
<br />TELEPHONE BACKBOARD. MOUNTING HEIGHT AS REQUIRED.
<br />COMBINATION TELEPHONE AND DATA OUTLET BOX WALL
<br />MOUNTED AT +18" A.F.F. (MIN) STUB A 1" C.O. UP 6" ABOVE
<br />THE ACCESSIBLE CEILING AND PROVIDE A BUSHING 4S/DP
<br />MINIMUM WITH SINGLE GANG RING.
<br />COMBINATION TELEPHONE AND DATA OUTLET BOX FLUSH
<br />MOUNTED IN FLOOR BOX WITH SERVICE FITTING. "P" =
<br />DESIGNATES PEDESTAL TYPE DEVICE "F" = DESIGNATES
<br />FIRE RATED POKE THROUGH
<br />CATV OUTLET
<br />WALL MOUNTED EMERGENCY LIGHT FIXTURE WITH
<br />VENDOR FURNISHED LAMPS
<br />4' WALL MOUNTED FIXTURE
<br />MISC
<br />A-1
<br />HOMERUN, A = PANEL DESTINATION, 1 = CIRCUITS WIRING
<br />SDCD SMOKE DETECTOR AND CARBON MONOXIDE COMBO
<br />HARDWIRED W/ BATTERY BACKUP
<br />SD SMOKE DETECTOR HARDWIRED W/ BATTERY BACKUP
<br />ELECTRICAL ABBREVIATIONS
<br />RESIDENT OFFICER IN-CHARGE OF
<br />CONSTRUCTION
<br />MW
<br />MV
<br />MTD
<br />MLO
<br />MH
<br />MH
<br />MFR
<br />MECH
<br />MCP
<br />MCC
<br />MCB
<br />MAX
<br />M
<br />LTG/LTS
<br />LPS
<br />LF
<br />LCP
<br />LCL
<br />LC
<br />KCMIL
<br />KW
<br />KVA
<br />K
<br />JB/JBOX
<br />INCAND
<br />IN OR
<br />"
<br />IG
<br />H.W.D.L
<br />HVAC
<br />HTR
<br />HPS
<br />HP
<br />HOA
<br />HID
<br />H
<br />GFP
<br />GFCI
<br />G/GRD
<br />FT
<br />FLUOR
<br />FLR
<br />FLA
<br />FIXT
<br />FDR
<br />FATC
<br />FACP
<br />FA
<br />EXIST
<br />EWC
<br />EQPT
<br />EP
<br />E.O.L.
<br />ENT
<br />EMT
<br />EMS
<br />EMER
<br />ELEV
<br />ELEC
<br />EL
<br />(E)
<br />EG
<br />EF
<br />D/W
<br />DWG
<br />DS
<br />DEG
<br />DIST
<br />DIA
<br />CT
<br />CPT
<br />CONT
<br />CONST
<br />CONN
<br />COMM
<br />C.O.
<br />CM/GC
<br />CLG
<br />CLF
<br />CLCB
<br />CKT
<br />CB
<br />CAB
<br />°C
<br />C
<br />B.O.T.
<br />BLDG
<br />BKR
<br />BCG
<br />BC
<br />BATT
<br />AWG
<br />AV
<br />ATS
<br />ASYM
<br />ARCH
<br />ANN
<br />AMP,
<br />A
<br />AS/AF
<br />AF/AT
<br />A/C
<br />AFCI
<br />AFG
<br />AFF
<br />ADA
<br />ABS ABOVE BACKSPLASH
<br />AMERICAN WITH DISABILITY ACT
<br />ABOVE FINISHED FLOOR
<br />ABOVE FINISHED GRADE
<br />ARC FAULT CIRCUIT INTERRUPTER
<br />AMPERES INTERRUPTING CAPACITY (SYMMETRICAL)
<br />AMP FRAME, AMP TRIP
<br />AMP SWITCH, AMP FUSE
<br />AMPERE
<br />ANNUNCIATOR
<br />ARCHITECTURAL
<br />ASYMMETRICAL
<br />AUTOMATIC TRANSFER SWITCH
<br />AUDIO/VISUAL
<br />AMERICAN WIRE GAUGE
<br />BATTERY
<br />BARE COPPER
<br />BARE COPPER GROUND
<br />BREAKER
<br />BUILDING
<br />BOTTOM OF TRAY
<br />CONDUIT
<br />CELSIUS
<br />CABINET
<br />CIRCUIT BREAKER
<br />CIRCUIT
<br />CURRENT LIMITING CIRCUIT BREAKER
<br />CURRENT LIMITING FUSE
<br />CEILING
<br />CONSTRUCTION MANAGER/GENERAL CONTRACTOR
<br />CONSTRUCTION ONLY, COMPLETE WITH PULL STRING
<br />COMMUNICATIONS
<br />CONNECTED
<br />CONSTRUCTION
<br />CONTINUATION
<br />CONTROL POWER TRANSFORMER
<br />CURRENT TRANSFORMER
<br />DELTA CONNECTED
<br />DIAMETER
<br />DISTRIBUTION
<br />DEGREE
<br />DISCONNECT SWITCH
<br />DRAWING
<br />DISH WASHER
<br />EXHAUST FAN
<br />EQUIPMENT GROUND
<br />EXISTING
<br />ELEVATION
<br />ELECTRICAL
<br />ELEVATOR
<br />EMERGENCY
<br />ENERGY MANAGEMENT CONTROL SYSTEM
<br />ELECTRICAL METALLIC TUBING
<br />ELECTRICAL NON-METALLIC TUBING
<br />END-OF-LINE CIRCUIT TERMINATOR
<br />EXPLOSION PROOF
<br />EQUIPMENT
<br />ELECTRIC WATER COOLER
<br />EXISTING
<br />FIRE ALARM
<br />FIRE ALARM CONTROL PANEL
<br />FIRE ALARM TERMINATION CABINET
<br />FEEDER
<br />FIXTURE
<br />FULL LOAD AMPS
<br />FLOOR
<br />FLUORESCENT
<br />FEET
<br />GROUND
<br />GROUND FAULT CIRCUIT INTERRUPTER
<br />GROUND FAULT PROTECTION
<br />HOT (UNSWITCHED)
<br />HIGH INTENSITY DISCHARGE
<br />HAND OFF AUTO
<br />HORSE POWER
<br />HIGH PRESSURE SODIUM
<br />HEATER
<br />HEATING, VENTILATION AND AIR CONDITIONING
<br />HEIGHT, WIDTH, DEPTH, LENGTH
<br />ISOLATED GROUND
<br />INCHES
<br />INCANDESCENT
<br />JUNCTION BOX
<br />DEGREE KELVIN
<br />KILOVOLT AMPERES
<br />KILOWATT
<br />THOUSAND CIRCULAR MILS
<br />LIGHTING CONTACTOR
<br />LINE CONTINUOUS LOAD
<br />LIGHTING CONTROL PANEL
<br />LINEAR FEET
<br />LOW PRESSURE SODIUM
<br />LIGHTING
<br />METER
<br />MAXIMUM
<br />MAIN CIRCUIT BREAKER
<br />MOTOR CONTROL CENTER
<br />MOTOR CIRCUIT PROTECTION
<br />MECHANICAL
<br />MANUFACTURER
<br />MOUNTING HEIGHT
<br />METAL HALIDE
<br />MAIN LUGS ONLY
<br />MOUNTED
<br />MERCURY VAPOR
<br />MICROWAVE
<br />TC
<br />SP
<br />RP
<br />FP
<br />GEF
<br />UGPS
<br />ANN
<br />FACP
<br />ELEV
<br />UBP
<br />LCP
<br />UT
<br />DT
<br />CT
<br />LT
<br />T
<br />VFD
<br />DISC SW
<br />SBG
<br />SDPB
<br />DP
<br />DB
<br />MS
<br />SSG
<br />MCC
<br />EQUIPMENT TYPE
<br />Y
<br />XFR
<br />XFMR
<br />WP
<br />W
<br />VFD
<br />VD
<br />VA
<br />V
<br />UTP
<br />UPS
<br />UON
<br />UG
<br />TSP
<br />TYP
<br />TV
<br />TELE/DATA
<br />TELCOM
<br />TEL
<br />TC
<br />SYS
<br />SYM
<br />SW
<br />SURF
<br />ST
<br />SSG
<br />SQ
<br />SPEC
<br />SN
<br />SF
<br />SECT
<br />SECONDARY
<br />SEC
<br />ROIC
<br />RM
<br />RGS
<br />REQD
<br />REF
<br />RECPT, REC
<br />QTY
<br />PWR
<br />PT
<br />PROVIDE
<br />PRIMARY
<br />PRI PRIMARY
<br />OVER 600 VOLTS
<br />FURNISH, INSTALL AND CONNECT
<br />POTENTIAL TRANSFORMER
<br />POWER
<br />QUANTITY
<br />RECEPTACLE
<br />REFRIGERATOR
<br />REQUIRED
<br />RIGID GALVANIZED STEEL
<br />ROOM
<br />SECURITY
<br />600 VOLTS AND LESS
<br />SECTION
<br />SQUARE FOOT
<br />SOLID NEUTRAL
<br />SPECIFICATION
<br />SQUARE
<br />SECONDARY SWITCHGEAR
<br />SHUNT TRIP
<br />SURFACE
<br />SWITCH
<br />SYMMETRICAL
<br />SYSTEMS
<br />TIME CLOCK
<br />TELEPHONE
<br />TELECOMMUNICATIONS
<br />TELEPHONE AND DATA
<br />TELEVISION
<br />TYPICAL
<br />TWISTED SHIELDED PAIR
<br />UNDERGROUND
<br />UNLESS OTHERWISE NOTED
<br />UNINTERRUPTIBLE POWER SUPPLY
<br />UNSHIELDED TWISTED PAIR
<br />VOLTS
<br />VOLT AMPERES
<br />VOLTAGE DROP
<br />VARIABLE FREQUENCY DRIVE
<br />WIRE
<br />WEATHERPROOF
<br />TRANSFORMER
<br />TRANSFER
<br />WYE CONNECTED
<br />- MOTOR CONTROL CENTER
<br />- SECONDARY SWITCHGEAR
<br />- MAIN SWITCHBOARD
<br />- DISTRIBUTION BOARD
<br />- DISTRIBUTION PANELBOARD
<br />- STANDBY DISTRIBUTION PANELBOARD
<br />- STANDBY GENERATOR
<br />- DISCONNECT SWITCH
<br />- VARIABLE FREQUENCY DRIVE
<br />- TRANSFORMER
<br />- LIGHTING TRANSFORMER
<br />- CLEAN POWER TRANSFORMER
<br />- DIRTY POWER TRANSFORMER
<br />- UTILITY POWER TRANSFORMER
<br />- LIGHTING CONTROL PANEL
<br />- UTILITY BRANCH PANEL
<br />- ELEVATOR
<br />- FIRE ALARM CONTROL PANEL
<br />- FIRE ALARM ANNUNCIATOR PANEL
<br />- UNDERGROUND PULL SECTION
<br />- GARAGE EXHAUST FAN
<br />- FIRE PUMP
<br />- REC BUILDING PANEL
<br />- SUMP PUMP
<br />- TELEPHONE CABINET
<br />PR
<br />PL
<br />PH
<br />PC
<br />PB
<br />PA
<br />P
<br />OFCI
<br />NO. OR #
<br />NO
<br />NIC
<br />NF
<br />NEC
<br />NC
<br />N NEUTRAL
<br />NORMALLY CLOSED
<br />NATIONAL ELECTRICAL CODE
<br />NON-FUSED
<br />NOT IN CONTRACT
<br />NORMALLY OPEN
<br />NUMBER
<br />OWNER FURNISHED, CONTRACTOR INSTALLED
<br />POLE
<br />PUBLIC ADDRESS
<br />PULL BOX
<br />PHOTO CELL
<br />PHASE
<br />POLE
<br />PAIR
<br />1.ALL WORK SHALL COMPLY WITH CALIFORNIA CODE OF REGULATIONS 2022 TITLE 24, 2020 N.E.C., & 2022 C.E.C. AND
<br />LOCAL CODES. ELECTRICAL WORK SHALL COMPLY WITH CBC 2022 AND ALL EQUIPMENT AND SYSTEMS SHALL BE U.L.
<br />LISTED.
<br />2.PROVIDE ALL MATERIALS AND LABOR AS REQUIRED TO ACHIEVE A COMPLETE AND OPERATIONAL SYSTEM.
<br />3.COORDINATE AND OBTAIN APPROVALS FROM ALL RESPECTIVE UTILITY COMPANIES AS REQUIRED FOR A COMPLETE
<br />AND FUNCTIONAL INSTALLATION.
<br />4.INSTALL RACEWAY SYSTEMS AS FOLLOWS:
<br />a.USE RIGID GALVANIZED STEEL IN ALL AREAS EXPOSED TO WEATHER OR PHYSICAL DAMAGE
<br />b.USE FLEXIBLE METALLIC CONDUIT ONLY IN AREAS AS PERMITTED BY LOCAL CODE AUTHORITY. USE SEAL-TITE IN
<br />AREAS EXPOSED TO WEATHER.
<br />c.USE COMPRESSION TYPE FITTINGS FOR ELECTRICAL METALLIC TUBING WHERE UTILIZED
<br />d.USE P.V.C. CONDUIT UNDERGROUND WITH CODE SIZED GROUND. CONDUIT RISERS AND STUBS ABOVE GRADE
<br />SHALL BE I.M.C. WITH HALF-LAPPED TAPE COVERING OR P.V.C. COATING.
<br />5.PROVIDE COPPER CONDUCTORS FOR ALL BRANCH CIRCUITS AND EQUIPMENT FEEDERS (I,E., HVAC & PLUMBING EQUIP,
<br />APPLIANCES, OWNER PROVIDED EQUIP, ETC...) WITH 600 VOLT TYPE "THHN" INSULATION IN DRY LOCATIONS AND TYPE
<br />"THWN" INSULATION IN DAMP OR WET LOCATIONS. CONDUCTORS IN SIZES #10 AWG AND SMALLER SHALL BE SOLID;
<br />OTHER CONDUCTORS SHALL BE STRANDED. #12 AWG IS THE SMALLEST CONDUCTOR SIZE PERMITTED FOR LINE
<br />VOLTAGE BRANCH WIRING. BOTH ENDS OF ALL WIRE RUNS SHALL BE LABELED W/ NUMBERED PRESSURE LABELS.
<br />SPLICE ONLY IN ACCESSIBLE JUNCTION OR OUTLET BOXES. SCREW-ON CONNECTORS SHALL BE NEATLY INSTALLED;
<br />GROUPED, LACED OR CLIPPED, AND FANNED OUT TO/FROM TERMINAL.
<br />6.U.O.N., PROVIDE ALUMINUM CONDUCTORS TYPE THWN-2 FOR PANELBOARD FEEDERS AS SHOWN ON SINGLE LINE
<br />DIAGRAM, ALL OTHER CONDUCTORS SHOWN ELSEWHERE SHALL BE COPPER AS SPECIFIED ABOVE.
<br />7.CONDUIT FOR ROOF MOUNTED EQUIPMENT SHALL BE ROUTED BELOW THE ROOF WITHIN THE BUILDING.
<br />8.ALL FIXTURE, DEVICE, ETC.. LOCATIONS SHALL BE VERIFIED WITH ARCHITECTURAL DRAWINGS AS WELL AS EQUIPMENT
<br />SUPPLIER REQUIREMENTS PRIOR TO ANY ROUGH-IN WORK
<br />9.ELECTRONIC BALLASTS FOR FLUORESCENT LIGHTING FIXTURES SHALL HAVE A MINIMUM BALLAST FACTOR (BF) OF 0.90
<br />OR GREATER UNLESS OTHERWISE SPECIFIED
<br />10.ELECTRICAL CONTRACTOR SHALL PROVIDE LIGHTING FIXTURE MOUNTING KITS AS REQUIRED TO SUIT THE EXACT TYPE
<br />OF CEILING TO WHICH THEY ARE MOUNTED.
<br />11.THESE DRAWINGS ARE DIAGRAMMATIC AND REPRESENT THE INTENT OF EQUIPMENT, DEVICES, ETC... TO BE
<br />CONNECTED AND THE CIRCUITS TO WHICH THEY ARE TO BE CONNECTED TO. CONTRACTOR SHALL INSTALL ALL
<br />CONDUIT, J-BOXES, ETC... AS REQUIRED FOR A COMPLETE AND OPERATIONAL SYSTEM.
<br />12.ALL EXTERIOR EQUIPMENT SHALL BE WEATHERPROOF
<br />13.ELECTRICAL CONTRACTOR SHALL PERFORM ALL WORK IN STRICT ACCORDANCE WITH ALL LOCAL, STATE, AND
<br />NATIONAL GOVERNING CODES.
<br />14.ALL EQUIPMENT SHALL BE NEW AND BEAR A "UL" LABEL-U.O.N.
<br />15.ELECTRICAL CONTRACTOR SHALL SECURE AND PAY FOR ALL NECESSARY BUILDING PERMITS
<br />16.COMPLETE ELECTRICAL INSTALLATION SHALL BE GUARANTEED IN WRITING FOR A PERIOD OF (1) YEAR
<br />17.ELECTRICAL CONTRACTOR SHALL INCLUDE IN BID - COSTS FOR ALL HVAC CONTROL COMPONENTS. CONDUITS, DEVICES,
<br />ETC... AS DEEMED NECESSARY FOR A COMPLETE AND OPERATIONAL HVAC SYSTEM. REFER TO MECHANICAL
<br />DRAWINGS, DIAGRAMS AND SPECS FOR THOSE ITEMS REQUIRED UNDER THE ELECTRICAL SECTION OF THIS CONTRACT.
<br />18.ELECTRICAL CONTRACTOR SHALL VISIT SITE PRIOR TO BID DATE, TO VERIFY ALL EXISTING CONDITIONS TO BE
<br />ENCOUNTERED IN THE INSTALLATION OF ALL NEW EQUIPMENT, FIXTURES, DEVICES, FEEDERS ETC.. EXACT
<br />INSTALLATION METHOD AND REQUIREMENTS SHALL BE VERIFIED AND DETERMINED PRIOR TO BID DATE.
<br />CONTRACTORS SHALL IMMEDIATELY NOTIFY THIS ENGINEER OF ANY REQUIRED MODIFICATIONS WHICH ARE NOT
<br />SHOWN ON THESE DRAWINGS. SUBMITTAL OF BID INDICATES CONTRACTOR IS AWARE OF ALL JOB SITE CONDITIONS
<br />AND WORK TO BE PERFORMED.
<br />19.ELECTRICAL CONTRACTOR SHALL FURNISH THE FOLLOWING SHOP DRAWINGS FOR PRIOR APPROVAL:
<br />a.ALL SUBSTITUTED LIGHT FIXTURES.
<br />b.ALL ELECTRICAL SERVICE EQUIPMENT, DISTRIBUTION EQUIPMENT AND PANEL BOARDS.
<br />c.OTHER ITEMS AS SPECIFICALLY INDICATED.
<br />19.ALL ELECTRICAL EQUIPMENT CHARACTERISTICS, LOCATIONS, AND CONNECTION REQUIREMENTS SHALL BE VERIFIED
<br />PRIOR TO ANY ROUGH-IN WORK.
<br />20.COMPLETE ELECTRICAL SYSTEM SHALL BE GROUNDED IN ACCORDANCE WITH THE PRESENTLY ADOPTED EDITION OF
<br />THE CEC ARTICLE 250.
<br />21.PENETRATIONS OF ALL FIRE RATED WALLS OR CEILINGS SHALL BE FIRE RATED IN ACCORDANCE WTH ALL LOCAL,
<br />STATE, AND NATIONAL CODES.
<br />22.PROVIDE ENGRAVED PLASTIC NAMEPLATES FOR ALL MAJOR ELECTRICAL EQUIPMENT.
<br />23.PROVIDE THE OWNER AND THIS ENGINEER WITH ONE SET OF ELECTRICAL "AS-BUILTS" AT THE COMPLETION OF JOB.
<br />24.ALL DISCONNECT SWITCHES TO BE PROVIDED WITH REJECTION TYPE FUSE HOLDERS.
<br />25.PROVIDE GREEN EQUIPMENT GROUNDING CONDUCTOR IN ALL FEEDER AND BRANCH CIRCUIT CONDUITS SIZED PER
<br />CEC 250-122.
<br />26.ALL LIGHTING FIXTURES SHALL BE PROVIDED WITH ALL REQUIRED OUTLET BOXES IN ACCORDANCE WITH CODE. FOR
<br />EXACT LOCATION OF ALL FIXTURES, REFER TO ARCHITECTURAL DRAWINGS. (ARCH TO APPROVE LIGHTING FIXTURES)
<br />27.SUPPLY PLASTER FRAMES, TRIM RINGS, AND BACKBOXES TO OTHER TRADES. COORDINATE WITH ARCHITECTURAL
<br />REFLECTED CEILING PLAN AND MECHANICAL EQUIPMENT.
<br />28.ALL FIXTURES, LENSES, AND OTHER TRIM SHALL BE ALIGNED, CLEANED, FREE OF PAINT AND BLEMISHES BEFORE
<br />FINAL ACCEPTANCE. NO FIXTURE SUPPORT OR INSERT, EXCEPT PENDANT CANOPIES, SHALL BE VISIBLE FROM THE
<br />FLOOR.
<br />29.CONTRACTOR SHALL PERFORM A BURN TEST. LIGHT FIXTURES MUST BURN CONTINUOUSLY PER MANUFACTURER
<br />RECOMMENDATION, MINIMUM 48 HOURS. TEST MUST BE REPEATED FOR EARLY BURNOUTS.
<br />30.VERIFY EXACT LOCATIONS AND ORIENTATION OF ALL MECHANICAL EQUIPMENT WITH MECHANICAL DRAWINGS. FIELD
<br />VERIFY CONDITIONS WITH MECHANICAL CONTRACTOR PRIOR TO ROUGH-IN.
<br />31.REFER TO THE MECHANICAL DRAWINGS FOR EXACT EQUIPMENT RATINGS AND ELECTRICAL REQUIREMENTS.
<br />COORDINATE WITH THE INSTALLER OF THE HVAC SYSTEMS AND PROVIDE ALL CONDUIT, WIRING, TIME CLOCKS,
<br />STARTERS, CONTROL DEVICES, RELAYS, DISCONNECT SWITCHES, FIRE SMOKE DAMPERS, ETC. FOR THE PROPER
<br />OPERATION OF THE MECHANICAL SYSTEMS. REFER TO THE MECHANICAL DRAWINGS AND ADDENDUMS FOR
<br />ADDITIONAL ELECTRICAL REQUIREMENTS.
<br />32.NO PIPING, DUCTS OR EQUIPMENTS FOREIGN TO ELECTRICAL EQUIPMENT SHALL BE PERMITTED TO BE LOCATED
<br />WITHIN THE DEDICATED SPACE ABOVE THE ELECTRICAL EQUIPMENT. PROVIDE A NOTE ON THE PLANS. (110.26(F))
<br />33.FIELD VERIFY SERVICE WATER PROOF & GFI RECEPTACLES IS PROVIDED WITHIN 25' OF ROOFTOP MECHANICAL
<br />EQUIPMENTS. (210.63)
<br />ELECTRICAL SHEET INDEX
<br />NO.SHEET DESCRIPTION
<br />1 E-0.1 ELECTRICAL COVER SHEET
<br />2 E-0.2 SINGLE LINE DIAGRAM & PANEL SCHEDULES
<br />3 E-1.1 LIGHTING PLAN
<br />4 E-1.2 POWER PLAN
<br />SINGLE POLE SWITCH AT 48" U.O.N.
<br />DIMMER SWITCH/DIMMING WALL CONTROL STATION AT +48" U.O.N.
<br />THREE-WAY SWITCH AT +48" U.O.N.
<br />THREE-WAY DIMMER SWITCH AT +48" U.O.N.
<br />MANUAL MOTOR STARTER
<br />CEILING MOUNTED OCCUPANCY SENSOR
<br />MANUFACTURER TO BE DETERMINED
<br />CEILING MOUNTED VACANCY SENSOR
<br />MANUFACTURER TO BE DETERMINED
<br />OCCUPANCY AUTOMATIC WALL SWITCH SENSOR WITH SINGLE LEVEL
<br />SWITCHING AT +48" U.O.N./MANUFACTURER TO BE DETERMINED
<br />VACANCY AUTOMATIC WALL SWITCH SENSOR WITH SINGLE LEVEL
<br />SWITCHING AT +48" U.O.N./MANUFACTURER TO BE DETERMINED
<br />OCCUPANCY SENSOR SINGLE POLE SWITCH WITH DIMMER CONTROL
<br />FEATURE AT +48" U.O.N./MANUFACTURER TO BE DETERMINED
<br />CEILING MOUNTED DAYLIGHT SENSOR
<br />MANUFACTURER TO BE DETERMINED
<br />S
<br />S3
<br />MS
<br />D
<br />D 3
<br />OS
<br />VS
<br />OS/D
<br />OS
<br />VS
<br />DL
<br />©2024Sheet No.
<br />Revisions
<br />1
<br />24303Project No.
<br />Date
<br />Hu
<br />n
<br />t
<br />i
<br />n
<br />g
<br />t
<br />o
<br />n
<br />
<br />E
<br />x
<br />e
<br />c
<br />u
<br />t
<br />i
<br />v
<br />e
<br />
<br />P
<br />a
<br />r
<br />k
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />P
<br />h
<br />o
<br />n
<br />e
<br />:
<br />
<br />(
<br />7
<br />1
<br />4
<br />)
<br />
<br />9
<br />2
<br />8
<br />-
<br />2
<br />0
<br />0
<br />6
<br />16
<br />1
<br />6
<br />8
<br />
<br />B
<br />e
<br />a
<br />c
<br />h
<br />
<br />B
<br />l
<br />v
<br />d
<br />,
<br />
<br />S
<br />t
<br />e
<br />
<br />#
<br />
<br />2
<br />0
<br />1
<br />C
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />W
<br />e
<br />b
<br />s
<br />i
<br />t
<br />e
<br />:
<br />
<br />H
<br />o
<br />m
<br />e
<br />T
<br />o
<br />p
<br />H
<br />o
<br />m
<br />e
<br />.
<br />c
<br />o
<br />m
<br />Hu
<br />n
<br />t
<br />i
<br />n
<br />g
<br />t
<br />o
<br />n
<br />
<br />B
<br />e
<br />a
<br />c
<br />h
<br />,
<br />
<br />C
<br />A
<br />
<br />9
<br />2
<br />6
<br />4
<br />7
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />E
<br />m
<br />a
<br />i
<br />l
<br />:
<br />
<br />i
<br />n
<br />f
<br />o
<br />@
<br />H
<br />o
<br />m
<br />e
<br />T
<br />o
<br />p
<br />H
<br />o
<br />m
<br />e
<br />.
<br />c
<br />o
<br />m
<br />Pr
<br />o
<br />j
<br />e
<br />c
<br />t
<br />
<br />f
<br />o
<br />r
<br />:
<br />BA
<br />R
<br />B
<br />E
<br />R
<br />
<br />S
<br />H
<br />O
<br />P
<br />51
<br />2
<br />7
<br />
<br />
<br />W
<br />
<br />E
<br />D
<br />I
<br />N
<br />G
<br />E
<br />R
<br />
<br />A
<br />V
<br />E
<br />N
<br />U
<br />E
<br />
<br />,
<br />
<br />S
<br />U
<br />I
<br />T
<br />E
<br />
<br />G
<br />SA
<br />N
<br />T
<br />A
<br />
<br />A
<br />N
<br />A
<br />,
<br />
<br />C
<br />A
<br />
<br />9
<br />2
<br />7
<br />0
<br />4
<br />November 23, 2024
<br />Design by
<br />TRINH HA, M. Arch.
<br />E-0.1
<br />ELECTRICAL
<br />COVER SHEET
<br />Design by
<br />TRINH HA, M. Arch.TUNG VO, M.S., P.E.
<br />C 69546
<br />Exp: 06/30/26
<br />TUNG T HANH VO
<br />C I V I LSTATE OF CALIFORNIA
<br />REGISTERED PROFESSIONAL ENGINEER
<br />5127 W Edinger Ave
<br />#G5/8/2025
|