801 E Santa Ana Blvd - Plan - Laserfiche WebLink

Home Browse Search

CLIENT:REVISIONS:JOB NO.:TITLE:SHEET: DESIGN BY: HOMEAID FX RESIDENCE DESCRIPTION DATE REVISION 801 SANTA ANA BLVD SANTA ANA, CA TEL: 949-220-1136 CSS2212-001 TMG DATE:12/2/2022 PV-3 CALSTATE SOLAR 29990 TECHNOLOGY DRIVE, #14 & #15 MURRIETA, CA 92563 License # 1006247 INSTALLER: CALSTATE SOLAR 29990 TECHNOLOGY DRIVE, #14 & #15 MURRIETA, CA 92563 License # 1006247 ELECTRICAL LINE DIAGRAM PV MODULE G G G G G G G G G G G LOAD CENTER JB 14 - #12 AWG, BRANCH CABLES INTEGRAL TO INVERTERS 1 - #6 AWG, BARE COPPER GROUND 14 - #10 AWG, THWN-2, HOT 1 - #10 AWG, THWN-2, GND 2 - #1 AWG, THWN-2, HOT 1 - #4 AWG, THWN-2, GND 1 - #1 AWG, THWN-2, NEUT 1-1/2" EMT CONDUIT, EXTERNAL OR ENPHASE MICRO-INVERTER G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G G PV ARRAY: 29.20 kW PHOTOVOLTAIC ARRAY MFG: URECO MODEL: URECO FMB400MFG-BB 1 STRINGS OF 7 URECO FMB400MFG-BB MODULES AND 6 STRINGS OF 11 URECO FMB400MFG-BB MODULES ATTACHED WITH ENPHASE IQ8PLUS-72-2-US (208V) INVERTER OPEN CIRCUIT VOLTAGE PER MODULE (VOC): 45.30V MAX. POWER VOLATE PER MODULE (VMP): 37.13V SHORT CIRCUIT CURRENT PER MODULE (ISC) : 11.14A MAX. POWER CURRENT PER MODULE (IMP): 10.77A ARRAY NOTES: 1.EQUIPMENT INSTALLED IN ACCORDANCE WITH THE NEC SECTION 690 AND ALL APPLICABLE REQUIREMENTS OF SERVICE UTILITY AND AUTHORITY HAVING JURISDICTION (AHJ). 2.GROUND WIRE MUST BE CONTINUOUS AND INSTALLED TO ALLOW FOR PANEL REMOVAL WITHOUT DISRUPTING CONTINUITY. ALL MODULE GROUND CONNECTIONS SHALL BE MADE IN ACCORDANCE WITH NEC 690.4 (C). 3.FOLLOW MANUFACTURERS SUGGESTED INSTALLATION PRACTICES AND WIRING SPECIFICATIONS. 4.WIRES SHALL BE RATED AND LABELED "SUNLIGHT RESISTANT" WHERE EXPOSED TO AMBIENT CONDITIONS. G G G G G G G G G G G G G G G G G G G G G G JB JB G G G G G G G 1-1/2" FMC CONDUIT, INTERNAL 801 E Santa Ana Blvd - 101116032 & 2018044512/18/2023