929 E Jonquil Rd - Plan - Laserfiche WebLink

Home Browse Search

Data Sheet Enphase Q Cable Accessories REGION: Americas Enphase Q Cable Accessories To learn more about Enphase offerings, visit enphase.com The Enphase Q Cable ™ and accessories are part of the latest generation Enphase IQ System ™. These accessories provide simplicity, reliability, and faster installation times. Enphase Q Cable •Two-wire, double-insulated Enphase Q Cable is 50% lighter than the previous generation Enphase cable New cable numbering and plug and play connectors speed up installation and simplify wire management •Link connectors eliminate cable waste Field-Wireable Connectors •Easily connect Q cables on the roof without complex wiring Make connections from any open connector and center feed any section of cable within branch limits •Available in male and female connector types 9 EN PHASE. Enphase Q Cable Accessories CONDUCTOR SPECIFICATIONS Certification Flame test rating Compliance Conductor type Disconnecting means UL3003 (raw cable), UL 9703 (cable assemblies), DG cable FT4 RoHS, OIL RES I, CE, UV Resistant, combined UL for Canada and United States THHN/THWN-2 dry/wet The AC and DC bulkhead connectors have been evaluated and approved by UL for use as the load-break disconnect required by NEC 690. Q CABLE TYPES/ ORDERING OPTIONS Connectorized Models Size/ Ma x Nominal Voltage Connector Spacing PV Module Orientation Connector Count per Box Q-12-10-240 Q-12-17-240 Q-12-20-200 12 AWG / 277 VAC 12 AWG / 277 VAC 12 AWG / 277 VAC EN PHASE Q CABLE ACCESSORIES Name Model Number Raw Q Cable Field-wireable connector (male) Field-wireable connector (female) Cable Clip Q-12-RAW-300 Q-CONN-10M Q-CONN-10F Q-CLIP-100 Q-DISC-10 Q-SEAL-10 Q-TERM-10 ECA-EN4-S22 Disconnect tool Q Cable sealing caps (female) Terminator En phase EN4 to MC4 adaptor' Enphase EN4 non-terminated adaptor' ECA-EN4-FW En phase EN4 to MC4 adaptor (long)' ECA-EN4-S22-L Replacement DC Adaptor (MC4) Q-DCC-2 Replacement DC Adaptor (UTX) Q-DCC-5 1. Qualified per UL subject 9703. TERMINATOR Terminator cap for unused cable ends, sold in packs of ten (Q-TERM-10) DISCONNECT TOOL Plan to use at least one per installation, sold in packs of ten (Q-DISC-10) To learn more about Enphase offerings, visit enphase.com 1.3 m (4.2 ft) 2.0 m (6.5 ft) 2.3 m (7.5 ft) Description Portrait Landscape (60-cell) Landscape (72-cell) 240 240 200 300 meters of 12 AWG cable with no connectors Make connections from any open connector Make connections from any Q Cable open connector Used to fasten cabling to the racking or to secure looped cabling Disconnect tool for Q Cable connectors, DC connectors, and AC module mount One needed to cover each unused connector on the cabling Terminator cap for unused cable ends Connect PV module using MC4 connectors to IQ micros with EN4 (TE PV4-S SOLARLOK). 150mm/5.9" to MC4. For field wiring of UL certified DC connectors. EN4 (TE PV4-S SOLARLOK) to non-terminated cable. 150mm/5.9" Longer adapter cable for EN4 (TE PV4-S SOLARLOK) to MC4. Use with split cell modules or PV modules with short DC cable. 600mm/23.6" DC adaptor to MC4 (max voltage 100 VDC) DC adaptor to UTX (max voltage 100 VDC) SEALING CAPS Sealing caps for unused aggregator and cable connections (Q-BA-CAP-10 and Q-SEAL-10) CABLE CLIP Used to fasten cabling to the racking or to secure looped cabling, sold in packs of one hundred (Q-CLIP-100) © 2020 En phase Energy. All rights reserved. En phase, the En phase logo, En phase IQ 7 A, En phase IQ Battery, Enphase Enlighten, En phase IQ Envoy, and other trademarks or service names are the trademarks of Enphase Energy, Inc. Data subject to change. Q EN pH AS E 2020-06-26 '-J • 929 E Jonquil Rd - 2018144011/27/2023