Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.11 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />7 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />Concrete - Mar 4, 2025 (1) <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />7 <br />3/6/2025 <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -2.000 -2.000 - - - - <br />2 2.000 -2.000 - - - - <br />3 -2.000 2.000 - - - - <br />4 2.000 2.000 - - - - <br />7 Installation data <br /> Anchor type and diameter: Kwik Bolt TZ2 - CS 1/2 (2) <br /> hnom2 <br /> Profile: Round HSS (AISC), HSS1.9X.188; (L x W x T) = 1.900 in. x 1.900 in. x <br /> 0.188 in. <br /> Item number: 2210254 KB-TZ2 1/2x3 3/4 <br /> Hole diameter in the fixture: df = 0.562 in. Maximum installation torque: 602 in.lb <br /> Plate thickness (input): 0.375 in. Hole diameter in the base material: 0.500 in. <br /> Recommended plate thickness: not calculated Hole depth in the base material: 2.750 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 4.000 in. <br /> Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br /> required. <br /> Hilti Æ 1/2 in Kwik Bolt TZ2 - CS with 2.5 in nominal embedment depth per ICC-ES ESR-4266 , Hammer drill bit installation per MPII <br />7.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Manual blow-out pump • Torque controlled cordless impact tool <br />• Torque wrench <br />• Hammer <br />1 2 <br />3 4 <br />x <br />y <br />3.000 3.000 <br />1.000 4.000 1.000 <br />1. <br />0 <br />0 <br />0 <br />4. <br />0 <br />0 <br />0 <br />1. <br />0 <br />0 <br />0 <br />3. <br />0 <br />0 <br />0 <br />3. <br />0 <br />0 <br />0 <br />13 of 89 <br />3201 S Halladay St <br />5/5/2025