Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.11 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />6 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />Concrete - Mar 5, 2025 (2) <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />6 <br />3/6/2025 <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -3.000 -3.000 - - - - <br />2 3.000 -3.000 - - - - <br />3 -3.000 3.000 - - - - <br />4 3.000 3.000 - - - - <br />6 Installation data <br /> Anchor type and diameter: KWIK HUS-EZ (KH-EZ) <br /> (Carbon Steel) 3/8 (3 1/4) <br /> Profile: Round HSS (AISC), HSS4-1/2X.237; (L x W x T) = 4.500 in. x 4.500 in. <br /> x 0.237 in. <br /> Item number: 418058 KH-EZ 3/8"x3 1/2" <br /> Hole diameter in the fixture: df = 0.500 in. Maximum installation torque: 480 in.lb <br /> Plate thickness (input): 0.250 in. Hole diameter in the base material: 0.375 in. <br /> Recommended plate thickness: not calculated Hole depth in the base material: 3.500 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 4.750 in. <br /> Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br /> required. <br /> Hilti Æ 3/8 in KWIK HUS-EZ (KH-EZ) (Carbon Steel) with 3.25 in nominal embedment depth per ICC-ES ESR-3027 , Hammer drill bit installation <br /> per MPII <br />6.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Manual blow-out pump • Torque wrench <br />1 2 <br />3 4 <br />x <br />y <br />4.000 4.000 <br />1.000 6.000 1.000 <br />1. <br />0 <br />0 <br />0 <br />6. <br />0 <br />0 <br />0 <br />1. <br />0 <br />0 <br />0 <br />4. <br />0 <br />0 <br />0 <br />4. <br />0 <br />0 <br />0 <br />49 of 89 <br />3201 S Halladay St <br />5/5/2025