Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.1.11 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2025 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />8 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />Concrete - Mar 5, 2025 (2) <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />8 <br />3/6/2025 <br />7.2 Installation data <br /> Anchor type and diameter: KWIK-X (Carbon Steel) 3/8 (3) <br /> hnom2 <br /> Profile: Round HSS (AISC), HSS4-1/2X.237; (L x W x T) = 4.500 in. x 4.500 in. <br /> x 0.237 in. <br /> Item number: 418058 KH-EZ 3/8"x3 1/2" (element) / <br /> 2346659 KHC 3/8" LARGE (capsule) <br /> Hole diameter in the fixture: df = 0.500 in. Maximum installation torque: - <br /> Plate thickness (input): 0.250 in. Hole diameter in the base material: 0.375 in. <br /> Recommended plate thickness: not calculated Hole depth in the base material: 4.250 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 5.500 in. <br /> Cleaning: No cleaning of the drilled hole is required <br /> Hilti Æ 3/8 in KWIK-X (Carbon Steel) with KH-EZ with KHC 3/8" LARGE with 3.000039 in nominal embedment depth per ICC-ES ESR-5065, <br /> Hammer drill bit installation per MPII <br />7.2.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• No accessory required • SIW 6-A22 Impact Screw Driver <br />51 of 89 <br />3201 S Halladay St <br />5/5/2025