Laserfiche WebLink
9ENPHASE. <br />108 and 108+ Microinverters <br />Our newest 108 Microinverters are the industry's first microgrid-forming, software­ <br />defined microinverters with split-phase power conversion capability to convert DC <br />power to AC power efficiently. The brain of the semiconductor-based microinverter <br />is our proprietary application-specific integrated circuit (ASIC) which enables the <br />microinverter to operate in grid-tied or off-grid modes. This chip is built in advanced <br />55nm technology with high speed digital logic and has super-fast response times <br />to changing loads and grid events, alleviating constraints on battery sizing for home <br />energy systems. <br />Part of the Enphase Energy System, 108 Series <br />Microinverters integrate with the Enphase IQ Battery, <br />Enphase IQ Gateway, and the Enphase App monitoring <br />and analysis software. <br />Connect PV modules quickly and easily to 108 Series <br />Microinverters using the included Q-DCC-2 adapter <br />cable with plug-n-play MC4 connectors. <br />108 Series Microinverters redefine reliability <br />standards with more than one million cumulative <br />hours of power-on testing, enabling an industry­ <br />leading limited warranty of up to 25 years. • <br />108 Series Microinverters are UL Listed as <br />PV Rapid Shut Down Equipment and conform with <br />various regulations, when installed according to <br />manufacturer1s instructions. <br />@ 2022 Enphase Energy. All rights reserved. Enphase, the Enphase logo, 108 Microlnverters, and other <br />names are trademarks of Enphase Energy, Inc. Data subject to change. <br />IQ8SP-DS-000 2-01-EN-US-2022-08-10 <br />iafil'iihiii <br />Easy to install <br />Lightweight and compact with <br />plug-n-play connectors <br />Power Line Communication <br />(PLC) between components <br />Faster installation with simple <br />two-wire cabling <br />High productivity and reliability <br />Produce power even when the <br />grid is down* <br />More than one million cumulative <br />hours of testing <br />Class II double-insulated <br />en closure <br />Optimized for the latest high­ <br />powered PV modules <br />Microgrid-forming <br />Complies with the latest <br />advanced grid support** <br />Remote automatic updates for <br />the latest grid requirements <br />Configurable to support a <br />wide range of grid profiles <br />Meets CA Rule 21 (UL 1741-SB) <br />requirements <br />• Only when installed with IQ System Controller 2, <br />meets UL 1741. <br />•• Iaa and IQ8Plus supports split phase, 240V <br />installations only. <br />108 and 108+ Microinverters <br />INPUT DATA IDCI 108-60-2-US IOSPLUS-72-2-US <br />Commonly used module pairings1 w <br />Module compatibility <br />MPPT voltage range V <br />Operating range V <br />Min/max start voltage V <br />Max input DC voltage V <br />Max DC current' [module lsc] A <br />Overvoltage class DC port <br />DC port backfeed current mA <br />PV array configuration <br />235-350 <br />60-cell/120 half-cell <br />27-37 <br />25-48 <br />30/ 48 <br />50 <br />235-440 <br />60-cell/120 half-cell, 66-cell/132 half-cell and 72-cell/144 <br />half-cell <br />29-45 <br />25-58 <br />30/58 <br />60 <br />1x1 Ungrounded array; No additional DC side protection req ired; AC side protection requires max 20A per branch circuit <br />OUTPUT DATA IACI 108-60-2-US IOBPLUS-72-2-US <br />Peak output power <br />Max continuous output power <br />Nominal (L-Ll voltage/range• <br />Max continuous output current <br />Nominal frequency <br />Extended frequency range <br />AC short circuit fault current over <br />3 cycles <br />Max units per 20 A (L-Ll branch circuit' <br />Total harmonic distortion <br />Overvoltage class AC port <br />AC port backfeed current <br />Power factor setting <br />Grid-tied power factor (adjustable) <br />Peak efficiency <br />CEC weighted efficiency <br />Night-time power consumption <br />MECHANICAL DATA <br />Ambient temperature range <br />Relative humidity range <br />DC Connector type <br />Dimensions (HxWxD) <br />Weight <br />Cooling <br />Approved for wet locations <br />Pollution degree <br />Enclosure <br />Environ. category I UV exposure rating <br />COMPLIANCE <br />Certifications <br />VA <br />VA <br />V <br />A <br />Hz <br />Hz <br />Arms <br />mA <br />'I, <br />'I, <br />mW <br />245 <br />240 <br />1.0 <br />16 <br />97.5 <br />97 <br />240/ 11-264 <br />0 <br />50 68 <br />< % <br />0 <br />1 0 <br />0.85 leading 0.85 lagging <br />0 <br />-40°C to +60°C (-40°F to +140 °F) <br />4% to 100% (condensing) <br />MC4 <br />212 mm (8.3") x 175 mm (6.9") x 30.2 mm (1.2") <br />1.08 kg (2.38 lbs) <br />Natural convection -no fans <br />Yes <br />PD3 <br />300 <br />290 <br />1.21 <br />13 <br />97.6 <br />97 <br />Class II double-insulated, corrosion resistant polymeric enclosure <br />NEMA Type 6 / outdoor <br />CA Rule 21 (UL 1741-SB), UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B, CAN/CSA-C22.2 N0.107.1-01 <br />This product is UL Listed as PV Rapid Shut Down Equipment and conforms with NEC 2014, NEC 2017, and NEC 2020 section <br />690.12 and C22.1-2018 Rule 64-218 Rapid Shutdown of PV Systems, for AC and DC conductors, when installed according to <br />manufacturer's instructions. <br />(1) No enforced DC/AC ratio. See the compatibility calculator at https://link.enphase.com/module-compatibility <br />(2) Maximum continuous input DC current is 10.6A (3) Nominal voltage range can be extended beyond nominal if required <br />by the utility. (4) Limits may vary. Refer to local requirements to define the number of microinverters per branch in your area. IQSSP-DS-000 2-01-EN-U S-202 2-08-10 <br />2406 W Mark St <br />Unit# 29/9/2024