|
3 PETERS CANYON RD. STE 110
<br />IRVINE, CA 92606
<br />D
<br />G
<br />ESI
<br />N
<br />|
<br />ARCHITECTURE
<br />H E S T I A A T E L I E R
<br />SHEET NUMBER:
<br />SHEET TITLE:
<br />SCALE: AS SHOWN
<br />STORE #:
<br />PROJECT #:
<br />PR
<br />O
<br />J
<br />E
<br />C
<br />T
<br />
<br />N
<br />A
<br />M
<br />E
<br />:
<br />PR
<br />O
<br />J
<br />E
<br />C
<br />T
<br />
<br />A
<br />D
<br />D
<br />R
<br />E
<br />S
<br />S
<br />:
<br />C 2020 STARBUCKS COFFEE COMPANY
<br />R
<br />ISSUE DATE:
<br />2401 UTAH AVENUE SOUTH
<br />SEATTLE, WASHINGTON 98134
<br />(206) 318-1575
<br />THESE DRAWINGS AND THE PROJECT MANUAL
<br />ARE CONFIDENTIAL AND SHALL REMAIN THE
<br />SOLE PROPERTY OF STARBUCKS
<br />CORPORATION, WHICH IS THE OWNER OF THE
<br />COPYRIGHT IN THIS WORK. THEY SHALL NOT
<br />BE REPRODUCED (IN WHOLE OR IN PART),
<br />SHARED WITH THIRD PARTIES OR USED IN ANY
<br />MANNER ON OTHER PROJECTS OR
<br />EXTENSIONS TO THIS PROJECT WITHOUT THE
<br />PRIOR WRITTEN CONSENT OF STARBUCKS
<br />CORPORATION. THESE DRAWINGS AND
<br />SPECIFICATIONS ARE INTENDED TO EXPRESS
<br />DESIGN INTENT FOR A PROTOTYPICAL
<br />STARBUCKS STORE (WHICH IS SUBJECT TO
<br />CHANGE AT ANYTIME) AND DO NOT REFLECT
<br />ACTUAL SITE CONDITIONS. NEITHER PARTY
<br />SHALL HAVE ANY OBLIGATION NOR LIABILITY TO
<br />THE OTHER (EXCEPT STATED ABOVE) UNTIL A
<br />WRITTEN AGREEMENT IS FULLY EXECUTED BY
<br />BOTH PARTIES.
<br />STARBUCKS R
<br />DESIGN MANAGER:
<br />PRODUCTION DESIGNER:
<br />CHECKED BY:
<br />STARBUCKS TEMPLATE VERSION: i2021.04.23
<br />76085-018
<br /><XX-XX-XXXX>
<br />TU
<br />S
<br />T
<br />I
<br />N
<br />
<br />&
<br />
<br />S
<br />A
<br />N
<br />T
<br />A
<br />CL
<br />A
<br />R
<br />A
<br />23
<br />0
<br />1
<br />
<br />N
<br />
<br />T
<br />U
<br />S
<br />T
<br />I
<br />N
<br />
<br />A
<br />V
<br />E
<br />,
<br />
<br />S
<br />A
<br />N
<br />T
<br />A
<br />AN
<br />A
<br />,
<br />
<br />C
<br />A
<br />,
<br />
<br />9
<br />2
<br />7
<br />0
<br />5
<br />51969
<br />CHARLIE CHANG
<br />AMY YANG
<br />MAGED GERGES
<br />1S
<br />T
<br />
<br />P
<br />E
<br />R
<br />M
<br />I
<br />T
<br />
<br />S
<br />U
<br />B
<br />M
<br />I
<br />T
<br />T
<br />A
<br />L
<br />
<br />S
<br />E
<br />T
<br />
<br />-
<br />
<br />0
<br />4
<br />/
<br />1
<br />6
<br />/
<br />2
<br />0
<br />2
<br />4
<br />Revision Schedule
<br />Rev Date By Description
<br />E001
<br />ELECTRICAL
<br />NOTES
<br />SECURITY SYSTEM NOTES
<br />A.STARBUCKS CONTRACTS DIRECTLY WITH SECURITY VENDOR TO SUPPLY AND
<br />INSTALL THE SECURITY SYSTEM. CONTRACTOR TO SCHEDULE INSTALLATION OF
<br />SECURITY SYSTEM FOR FOUR (4) TIMES;
<br />1.MEET TO PLAN SECURITY CABLE PULL WITH SECURITY CABLE INSTALLER
<br />PRIOR TO DRYWALL INSTALLATION.
<br />2.SECURITY CABLE INSTALLER PULLS SECURITY CABLES, MOUNTS PANEL,
<br />KEYPAD AND SENSORS.
<br />3.SECURITY EQUIPMENT INSTALL OF CAMERA, NVR AND MONITOR.
<br />4.SECURITY MONITORING COMPANY TO BRING SYSTEM ONLINE AND TRAIN
<br />PARTNERS AFTER POS INSTALL
<br />B.SECURITY VENDOR REQUIRES A MINIMUM TWO (2) WEEKS LEAD TIME FOR EACH
<br />INSTALLATION. SECURITY VENDOR WILL COORDINATE REGIONAL INSTALLERS. ALL
<br />ADDITIONAL EXPENSES INCURRED DUE TO THE CONTRACTOR'S FAILURE TO
<br />SCHEDULE ACCORDINGLY WILL BE THE RESPONSIBILITY OF THE CONTRACTOR.
<br />TELEPHONE SYSTEM NOTES
<br />A.IF ADDITIONAL TELEPHONE LINES ARE REQUIRED BEYOND THE STANDARD SINGLE
<br />LINE (SUCH AS FOR A FIRE ALARM) THE GENERAL CONTRACTOR SHALL CONTACT
<br />STARBUCKS PRIOR TO BEGINNING CONSTRUCTION TO ORDER THE ADDITIONAL
<br />TELEPHONE LINE(S). REPORT ANY TELEPHONE INSTALLATION ISSUES IMMEDIATELY
<br />TO STARBUCKS.
<br />B.CONFIRM PRIOR TO BEGINNING CONSTRUCTION THAT THERE ARE EXISTING,
<br />WORKING TEL FACILITIES TO THE BUILDING OR THAT LANDLORD HAS FURNISHED
<br />AND INSTALLED ONE (1) 2" (51MM) MIN. (ENTRANCE) CONDUIT INCLUDING PULL
<br />STRING FROM TELCO STREET FEED LINE TO THE BUILDING AS IDENTIFIED BY THE
<br />PHONE COMPANY. NOTIFY STARBUCKS CONSTRUCTION MANAGER IMMEDIATELY IF
<br />FACILITIES OR CONDUIT AND PULL STRING ARE NOT INSTALLED.
<br />C.GENERAL CONTRACTOR IS TO ENSURE THAT THERE IS A 2" (51MM) MIN. CONDUIT
<br />WITH PULL STRING FROM THE DATA RACK TO THE DEMARC (TELCO TO CUSTOMER
<br />HAND OFF EQUIPMENT) WHEN THE DEMARC IS MORE THAN 10' FROM THE DATA
<br />RACK. DISTANCES LESS THAN 10' WILL NOT REQUIRE CONDUIT.
<br />D.ALL TELEPHONE/NETWORK CABLING IS THE SCOPE OF WORK OF THE TELEPHONE/
<br />NETWORK CABLING VENDOR.
<br />POS/ DATA LINE NOTES
<br />A.STARBUCKS CONTRACTS DIRECTLY WITH THE DATA CABLING VENDOR TO SUPPLY
<br />AND INSTALL CATEGORY 5e (CAT5e) LAN CABLE AND CONNECTORS FOR THE POINT
<br />OF SALE (POS) SYSTEMS. CONTRACTOR TO SCHEDULE INSTALLATION OF DATA
<br />CABLING WITH DATA CABLING VENDOR. DATA CABLING VENDOR REQUIRES A LEAD
<br />TIME FOR INSTALLATION. DATA CABLING VENDOR WILL COORDINATE REGIONAL
<br />INSTALLERS.
<br />B.AT THE START OF CONSTRUCTION, STARBUCKS CONSTRUCTION MANAGER
<br />SCHEDULES DELIVER OF CASH REGISTER/MANAGER'S WORKSTATION EQUIPMENT
<br />AND INSTALLATION BY A POS INSTALL TECHNICIAN FOR ONE (1) MONTH PRIOR TO
<br />STORE OPEN. CONTRACTOR TO VERIFY DELIVERY SCHEDULE TWO (2) WEEKS PRIOR
<br />TO DELIVERY AND INSTALLATION DATE. EQUIPMENT IS SHIPPED DIRECTLY TO THE
<br />STORE. CONTRACTOR TO ACCEPT POS EQUIPMENT DELIVERY. DO NOT REFUSE
<br />DELIVERY.
<br />C.DATA CABLING TECHNICIAN TO PROVIDE ALL CAT5e LAN CABLING AND
<br />CONNECTORS FROM ALL DESIGNED AND FUTURE CASH REGISTER LOCATIONS,
<br />MANAGER'S WORKSTATION, ALL OTHER NETWORKED EQUIPMENT (CUP LABELERS,
<br />CLOVER, BUMP BAR, ETC...) AND WIRELESS ACCESS POINT TO THE DATA RACK
<br />AREA. CONTRACTOR IS TO HAVE CONDUIT WITH PULL STRING IN PLACE FOR ALL
<br />CABLE RUNS PRIOR TO CABLE INSTALL DATE.
<br />D.STARBUCKS NEW STORE GROUP IS RESPONSIBLE FOR COORDINATING STARBUCKS
<br />POS SYSTEMS DELIVERY AND INSTALLATION WITH THE POS VENDOR. THIS GROUP
<br />MAY BE CONTACTED AT: NEWSTORES@STARBUCKS.COM.
<br />COMMUNICATION SYSTEM NOTES
<br />A.CONFIRM PRIOR TO BEGINNING CONSTRUCTION THAT THE LANDLORD HAS
<br />FURNISHED AND INSTALLED ONE (1) ADDITIONAL 2" (51MM) (ENTRANCE) CONDUIT
<br />INCLUDING PULL STRING (FOR A TOTAL OF TWO (2)) FROM THE STREET FEED TO
<br />THE BUILDING AS IDENTIFIED BY THE INTERNET SERVICE PROVIDER.
<br />FIRE ALARM SYSTEM NOTES
<br />A.IF STARBUCKS IS REQUIRED TO PROVIDE A FIRE ALARM AND/OR FIRE ALARM
<br />MONITORING AND/OR PHONE LINES FOR A FIRE ALARM, AS SPECIFIED IN THE LEASE
<br />AGREEMENT, THE CONTRACTOR IS TO NOTIFY GNOC IMMEDIATELY THAT FIRE
<br />ALARM LINES ARE NEEDED. STARBUCKS PREFERRED FIRE ALARM SERVICE
<br />PROVIDER, STANLEY, IS TO BE CONTACTED BY THE CONSTRUCTION MANAGER TO
<br />INSTALL FIRE ALARM PANEL AND/OR MONITORING SERVICE AS REQUIRED.
<br />WIRELESS NETWORK NOTES
<br />A.CABLING FOR INTERNET SERVICE SHALL BE FURNISHED AND INSTALLED BY THE
<br />VENDOR FOR FIBER OR BROADBAND CONNECTIONS. T1 AND ETHERNET EXTENSION
<br />CABLING IS PROVIDED BY THE STARBUCKS (TELEPHONE/ NETWORK) CABLING
<br />VENDOR. COORDINATE WITH STARBUCKS.
<br />MUSIC SYSTEM NOTES
<br />A.PROVIDE AND INSTALL A COMPLETE WIRING SYSTEM FOR ALL SPEAKERS.
<br />CONNECT ALL SPEAKERS TO THE OWNER PROVIDED MUSIC SYSTEM.
<br />MOUNT OWNER FURNISHED SPEAKERS WHERE SHOWN ON INTERIOR
<br />REFLECTED CEILING PLAN AND IN COORDINATION WITH ALL PLANS AND
<br />DETAILS. FOLLOW MANUFACTURER'S INSTALLATION REQUIREMENTS.
<br />CONTROLS AND OPERATION
<br />A.COORDINATE INSTALLATION OF LIGHTING CONTROL PANEL (IF APPLICABLE)
<br />AND ENERGY MANAGEMENT SYSTEM (EMS) WITH ENERGY MANAGEMENT
<br />SYSTEM VENDOR.
<br />B.FURNISH AND INSTALL RACEWAYS WITH PULLSTRINGS AND JUNCTION BOXES
<br />TO SUPPORT VENDOR’S WORK.
<br />C.COORDINATE WITH VENDOR AND PLANS FOR DEVICE LOCATIONS.
<br />GENERAL ELECTRICAL NOTES
<br />A.THE ELECTRICAL CONTRACTOR SHALL COORDINATE ELECTRICAL WORK AND
<br />SPECIFICATIONS WITH OTHER TRADES. THE ARCHITECTURAL DRAWINGS AND
<br />SPECIFICATIONS SHALL TAKE PRECEDENCE OVER ALL OTHER DRAWINGS. DO NOT
<br />SCALE DISTANCES OFF THE ELECTRICAL DRAWINGS; USE ACTUAL BUILDING
<br />DIMENSIONS. OVERALL CASEWORK COMPONENT DIMENSIONING ON ELECTRICAL
<br />DETAILS ARE SHOWN FOR REFERENCE AND COORDINATION ONLY. SEE
<br />SPECIFICATION SHEETS FOR ELECTRICAL SPECIFICATIONS.
<br />B.ALL ELECTRICAL SYSTEMS SHALL BE TESTED FOR PROPER OPERATION. BALANCE
<br />ALL BRANCH CIRCUIT LOADS BETWEEN THE PHASES OF THE SYSTEM WITHIN 10%
<br />OF THE HIGHEST PHASE LOAD IN EACH PANEL BOARD.
<br />C.THE ELECTRICAL CONTRACTOR SHALL BE RESPONSIBLE FOR DE-ENERGIZING
<br />CIRCUITS IN DEMOLITION AREAS TO INSURE A SAFE CONDITION. ELECTRICAL
<br />DEVICES AND ASSOCIATED WIRING LOCATED WITHIN THE DEMOLITION AREA THAT
<br />WILL NO LONGER BE USED SHALL BE REMOVED AND PROPERLY DISPOSED OF AT
<br />CONTRACTORS EXPENSE UNLESS OTHERWISE NOTED.
<br />D.THE ELECTRICAL CONTRACTOR SHALL SCHEDULE ALL ELECTRICAL SYSTEM
<br />OUTAGES WITH THE GENERAL CONTRACTOR AND LANDLORD AT LEAST 24 HOURS IN
<br />ADVANCE. UNLESS APPROVED OTHERWISE ALL OUTAGES SHALL OCCUR BETWEEN
<br />11:00PM AND 5:00AM.
<br />E.ELECTRICAL CONTRACTOR SHALL FURNISH AND INSTALL ALL NECESSARY CONDUIT
<br />AND J-BOXES TO SUPPORT A COMPLETE SECURITY, PHONE, POS AND DATA
<br />SYSTEMS. SEE MANAGER WORKSTATION AND BAR POINT OF SALE (POS)
<br />POWER/TELECOM/SECURITY DIAGRAM. COORDINATE ALL DEVICE LOCATIONS AND
<br />MOUNTING HEIGHTS WITH SECURITY VENDOR PRIOR TO ROUGH-IN. PROVIDE
<br />END-TO-END PULL STRINGS IN ALL CONDUITS. LABEL EACH END OF THE PULL
<br />STRING WITH CONDUIT SYSTEM ("SECURITY") AND DESTINATION ("CAFÉ", "FRONT
<br />BAR", ETC.). PROVIDE INSULATED BUSHINGS ON ALL STUBBED-UP AND EXPOSED
<br />CONDUIT ENDS.
<br />F.ELECTRICAL CONTRACTOR SHALL COORDINATE WITH THE GENERAL CONTRACTOR
<br />TO PATCH AND REPAIR ALL EXISTING WALLS, FLOORS, CEILINGS OR OTHER
<br />SURFACES IDENTIFIED TO REMAIN THAT MAY BECOME DAMAGED DURING THE
<br />COURSE OF WORK.
<br />G.EXPOSED/SURFACE MOUNTED CONDUITS SHALL ONLY BE ALLOWED WHERE
<br />NECESSARY IN EXPOSED CEILING AREAS. IF CONDUITS NEED TO BE SURFACE
<br />MOUNTED TO WALLS, COORDINATE WITH STARBUCKS CONSTRUCTION MANAGER
<br />FOR APPROVAL.
<br />H.VERIFY LOCATION OF ALL OUTLETS AND SWITCHES WITH ARCHITECTURAL
<br />DRAWINGS, INTERIOR DETAILS, FINISH SCHEDULES, GENERAL CONTRACTOR,
<br />EQUIPMENT VENDORS, STARBUCKS AND EXISTING SITE CONDITIONS. VERIFY FINAL
<br />DOOR HINGE LOCATION PRIOR TO SWITCH INSTALLATION AND ADJUST SWITCH
<br />LOCATION IF NEEDED. DO NOT MOUNT RECEPTACLES/SWITCHES IN LOCATIONS
<br />THAT WOULD CONFLICT WITH MIRRORS, SEAMS OF WALLS, WAINSCOTS, TILE
<br />TRANSITIONS, ETC.
<br />GENERAL NOTES
<br />SCOPE
<br />THE INTENT OF THE SPECIFICATION AND THE DRAWINGS IS TO PROVIDE A
<br />COMPLETE AND FULLY OPERATIONAL ELECTRICAL SYSTEM. THE ELECTRICAL
<br />CONTRACTOR SHALL FURNISH AND INSTALL ALL LABOR, MATERIAL, AND
<br />EQUIPMENT NECESSARY TO COMPLETE THE ELECTRICAL WORK.
<br />SITE EXAMINATION
<br />THE ELECTRICAL CONTRACTOR SHALL THOROUGHLY EXAMINE ALL AREAS
<br />WHERE EQUIPMENT, CONDUIT, AND WIRING WILL BE INSTALLED AND WILL
<br />REPORT ANY CONDITION THAT, IN HIS OPINION, PREVENTS THE PROPER
<br />INSTALLATION OF THE ELECTRICAL WORK.
<br />STANDARDS
<br />EQUIPMENT AND MATERIALS SHALL CONFORM WITH APPROPRIATE
<br />PROVISIONS OF CSA, ULC, NEC, ASTM, UL, ETL, NEMA, ANSI, AS APPLICABLE
<br />TO EACH INDIVIDUAL UNIT OR ASSEMBLY.
<br />CODES
<br />ALL WORK SHALL BE PERFORMED IN STRICT ACCORDANCE WITH ALL
<br />APPLICABLE PROVINCIAL AND LOCAL CODES AND ORDINANCES. IN CASE OF
<br />CONFLICT BETWEEN THE DRAWINGS AND SPECIFICATIONS AND THE CODES,
<br />THE HIGHEST STANDARD SHALL APPLY. ELECTRICAL CONTRACTOR SHALL
<br />SATISFY CODE REQUIREMENTS AS A MINIMUM STANDARD WITHOUT ANY
<br />EXTRA COST TO STARBUCKS.
<br />PERMITS AND FEES
<br />THE ELECTRICAL CONTRACTOR SHALL PROCURE AND PAY FOR ALL PERMITS,
<br />FEES, AND INSPECTIONS NECESSARY TO COMPLETE THE ELECTRICAL WORK.
<br />WARRANTY
<br />THE ELECTRICAL CONTRACTOR SHALL UNCONDITIONALLY WARRANT ALL
<br />WORK TO BE FREE OF DEFECTS IN MATERIAL AND WORKMANSHIP FOR A
<br />PERIOD OF ONE (1) YEAR FROM THE DATE OF FINAL ACCEPTANCE BY
<br />STARBUCKS AND WILL REPAIR OR REPLACE ANY DEFECTIVE WORK
<br />PROMPTLY AND WITHOUT CHARGE AND RESTORE ANY OTHER EXISTING
<br />WORK DAMAGED IN THE COURSE OF REPAIRING DEFECTIVE MATERIALS AND
<br />WORKMANSHIP.
<br />STANDARD ABBREVIATIONS
<br />AFF
<br />AHJ
<br />APPROX
<br />ABOVE FINISHED FLOOR
<br />AUTHORITIES HAVING JURISDICTION
<br />APPROXIMATE
<br />BLDG BUILDING
<br />CKT
<br />CLG
<br />CM
<br />CONST
<br />CW
<br />CXA
<br />CIRCUIT
<br />CEILING
<br />STARBUCKS CONSTRUCTION MANAGER
<br />CONSTRUCTION
<br />COLD WATER
<br />COMMISSIONING AGENT
<br />DEG
<br />DL
<br />DM
<br />DN
<br />DTL
<br />DWG(S)
<br />DEGREES
<br />LIGHTS WITHIN DAYLIGHT ZONE
<br />STARBUCKS DESIGN MANAGER
<br />DOWN
<br />DETAIL
<br />DRAWING(S)
<br />EA
<br />EC
<br />ECP
<br />EG
<br />ELEC
<br />EM
<br />EMS
<br />EXIST
<br />EXT
<br />EACH
<br />ELECTRICAL CONTRACTOR
<br />EQUIPMENT CONTROL PAC
<br />EXHAUST GRILLE
<br />ELECTRICAL
<br />EMERGENCY
<br />ENERGY MANAGEMENT SYSTEM
<br />EXISTING
<br />EXTERIOR
<br />F&I
<br />FLR
<br />FT
<br />FURNISH & INSTALL
<br />FLOOR
<br />FOOT/FEET
<br />GC
<br />GFCI
<br />GND
<br />GENERAL CONTRACTOR
<br />GROUND FAULT CIRCUIT INTERRUPTER
<br />GROUND
<br />HR
<br />HVAC
<br />HW
<br />HOUR
<br />HEATING, VENTILATION, AIR CONDITIONING
<br />HOT WATER
<br />LCP
<br />LL
<br />LS
<br />LV
<br />LIGHTING CONTROL PANEL
<br />LANDLORD
<br />LIGHT SENSOR PHOTOCELL
<br />LOW VOLTAGE
<br />MAX
<br />MC
<br />MDP
<br />MECH
<br />MEP
<br />MFG
<br />MIN
<br />MAXIMUM
<br />MECHANICAL CONTRACTOR
<br />MAIN DISTRIBUTION PANEL
<br />MECHANICAL
<br />MECHANICAL, ELECTRICAL, AND PLUMBING
<br />MANUFACTURER
<br />MINIMUM
<br />NL
<br />NTS
<br />NIGHTLIGHT
<br />NOT TO SCALE
<br />OCP OVERCURRENT PROTECTION
<br />REF
<br />REQ(’D)
<br />REV
<br />REFERENCE
<br />REQUIRE(D)
<br />REVISION
<br />SF
<br />SHT
<br />SPECS
<br />SST
<br />SQUARE FEET
<br />SHEET
<br />SPECIFICATION(S)
<br />STAINLESS STEEL
<br />TEL
<br />TEMP
<br />TYP
<br />TELEPHONE
<br />TEMPORARY
<br />TYPICAL
<br />UNO UNLESS NOTED OTHERWISE
<br />WH
<br />WP
<br />WATER HEATER
<br />WEATHER PROOF
<br />ELECTRICAL SYMBOL LEGEND
<br />SYMBOL DESCRIPTION
<br />POWER
<br />DUPLEX RECEPTACLE, WALL MOUNTED
<br />DUPLEX RECEPTACLE, WALL MOUNTED, SPLIT-WIRED OCCUPANCY SENSOR
<br />CONTROLLED/SWITCHED
<br />DUPLEX RECEPTACLE, WALL MOUNTED, ISOLATED GROUND
<br />DUPLEX RECEPTACLE, WALL MOUNTED ABOVE COUNTER
<br />DUPLEX GFCI RECEPTACLE, WALL MOUNTED
<br />DUPLEX GFCI RECEPTACLE, WALL MOUNTED ABOVE COUNTER
<br />DUPLEX RECEPTACLE, WALL MOUNTED WITH TWO 5V USB CHARGING PORTS
<br />DOUBLE DUPLEX RECEPTACLE, WALL MOUNTED
<br />DOUBLE DUPLEX GFCI RECEPTACLE, WALL MOUNTED
<br />DUPLEX RECEPTACLE, FLUSH IN CEILING
<br />SPECIAL OUTLET: 20A, 250V, 2P, 3-WIRE NEMA 6-20R
<br />SPECIAL OUTLET: 30A, 125V, 1P, 3-WIRE NEMA 5-30R
<br />SPECIAL OUTLET: 30A, 250V, 2P, 3-WIRE NEMA 6-30R
<br />SPECIAL OUTLET: 50A, 250V, 2P, 3-WIRE NEMA 6-50R
<br />SPECIAL OUTLET: 50A, 250V, 3P, 4-WIRE NEMA 14-50R
<br />SPECIAL OUTLET: 50A, 250V, 3-PHASE, 4-WIRE NEMA 15-50R
<br />JUNCTION BOX
<br />JUNCTION BOX - WALL MOUNTED
<br />JUNCTION BOX MOUNTED IN ACCESSIBLE CEILING SPACE. MOUNT FLUSH IN FLOOR WHEN
<br />INDICATED IN A FLOOR BOX SYMBOL.
<br />NON-FUSED DISCONNECT SWITCH
<br />FUSED DISCONNECT SWITCH
<br />MOTOR. NUMBER INDICATES HORSEPOWER RATING FOR 1HP AND LARGER
<br />MOTOR. "F" INDICATES FRACTIONAL HORSEPOWER
<br />TRACK CURRENT LIMITER. "#" DENOTES AMPS RATING.
<br />POWER SUPPLY/DRIVER, CLASS 2 FOR LED
<br />FLOOR BOX SPECIFICATIONS
<br />SINGLE SERVICE IN FLOOR BOX. PROVIDE DEVICES PER PLAN.
<br />WIREMOLD RFB2-OG/FPCTC WHEN SHOWN IN ON-GRADE
<br />WIRE MOLD 6ATCP, 6ATP, OR 6ATCPAV AS REQUIRED WHEN SHOWN IN ABOVE GRADE.
<br />TWO SERVICE IN FLOOR BOX. PROVIDE DEVICES PER PLAN.
<br />WIREMOLD RFB2-OG/FPCTC WHEN SHOWN IN ON-GRADE
<br />WIRE MOLD 6ATCP, 6ATP, OR 6ATCPAV AS REQUIRED WHEN SHOWN IN ABOVE GRADE.
<br />SIGNAL
<br />TELEPHONE OUTLET
<br />DATA OUTLET
<br />COMBINATION TELEPHONE/COMPUTER OUTLET
<br />LIGHTING CONTROL SYMBOLS
<br />SINGLE POLE SWITCH, 20A, 120/277V or CAT5e WIRED WALL SWITCH TO BE USED WITH
<br />NON-DIMMING POWER/RELAY PACK
<br />LOW VOLTAGE (0-10V) WALL MOUNTED SWITCH FOR MANUAL ON/OFF AND DIMMING
<br />(STEPPED/CONTINUOUS) CONTROL OF LIGHTING. "a" INDICATES ZONE WHERE SHOWN ON
<br />DRAWINGS.
<br />OCCUPANCY SENSOR - WALL MOUNTED. "a" INDICATES CONTROLLED ZONE. SEE CONTROL
<br />CONFIGURATIONS FOR MORE INFORMATION.
<br />OCCUPANCY SENSOR w/ DIMMER - WALL MOUNTED. "a" INDICATES CONTROLLED ZONE.
<br />SEE CONTROL CONFIGURATIONS FOR MORE INFORMATION.
<br />1-WAY/2-WAY DIRECTIONAL CEILING MOUNTED, NON-NETWORKED/ INTERCONNECTED/
<br />NETWORKED, SYSTEM-BASED OCCUPANCY SENSOR. QUANTITY OF ADJACENT LOWER CASE
<br />LETTERS INDICATES QUANTITY OF RELAYS/DIMMING CIRCUITS REQUIRED - SEE CONTROL
<br />CONFIGURATIONS BELOW FOR MORE INFORMATION. EXACT CONTROL FUNCTION IS DETERMINED
<br />BY THE BALLAST/FIXTURE TYPE.
<br />AUTOMATIC CONTINUOUS DIMMING DAYLIGHTING CONTROLLER USED TO DIM LIGHTS WHEN
<br />SUFFICIENT NATURAL LIGHT IS PRESENT. NUMBER IN PARENTHESIS INDICATES THE AVERAGE
<br />WORKPLANE "TARGET ILLUMINATION" SYMBOL VALUE. ADJACENT LOWER CASE LETTER(S)
<br />INDICATES SWITCH LEG(S) CONTROLLED. ADJACENT "+, ++ AND *" INDICATES PORTION OF SWITCH
<br />LEG CONTROLLED BY SENSOR WHERE "+" INDICATES PRIMARY SIDELIT DAYLIT ZONE, "++"
<br />INDICATES SECONDARY SIDELIT DAYLIT ZONE, AND "*" INDICATES SKYLIT DAYLIT ZONE.
<br />CONTROL CONFIGURATIONS
<br />y "y" INDICATES THAT SWITCH LEG "y" TO BE CONFIGURED IN A "AUTO ON 100% / AUTO OFF" AND BE
<br />CONTROLLED (CONTINUOUSLY DIMMED) BY THE ASSOCIATED CEILING SENSOR REMOTE SWITCH
<br />ON THE WALL.
<br />y,(y)"y,(y)" INDICATES THAT SWITCH LEG "y" TO BE CONFIGURED IN A "AUTO ON 50% / MANUAL ON 100%
<br />/ AUTO OFF" AND BE CONTROLLED (CONTINUOUSLY DIMMED) BY THE ASSOCIATED DISTRIBUTED
<br />LIGHTING CONTROLS.
<br />(y)"(y)" INDICATES THAT SWITCH LEG "y" IS TO BE CONFIGURED IN A "MANUAL ON / AUTO OFF"
<br />(VACANCY SENSOR) AND BE CONTROLLED BY THE ASSOCIATED DISTRIBUTED LIGHTING
<br />CONTROLS.
<br />J
<br />J
<br />J
<br />30/1
<br />30/3RF
<br />5
<br />F
<br />y,(y)
<br />(40)
<br />y+,y++
<br />APPLICABLE CODES
<br />2022 CALIFORNIA BUILDING CODE (CBC)
<br />2022 CALIFORNIA ELECTRICAL CODE
<br />2022 CALIFORNIA MECHANICAL CODE (CMC)
<br />2022 CALIFORNIA PLUMBING CODE (CPC)
<br />2022 CALIFORNIA ENERGY CODE
<br />2022 CALIFORNIA FIRE CODE
<br />2022 NATIONAL FIRE ALARM AND SIGNALING CODE
<br />2022 CALIFORNIA GREEN BUILDING STANDARDS CODE (CGBSC)
<br />ALLOWED SPECIFICATIONS DEVIATIONS
<br />THE FOLLOWING ITEM(S) ARE ALLOWED DEVIATIONS FROM THE DRAWINGS AND
<br />SPECIFICATIONS. THESE DEVIATIONS ARE AT THE DIRECTION OF THE OWNER.
<br />NONE
<br />SCOPE OF WORK
<br />ELECTRICAL DESIGN FOR RETAIL AND BACKBAR RENOVATION.
<br />DEFERRED APPROVAL
<br />A.FIRE ALARM SYSTEM SHALL BE UNDER SEPARATE PERMIT. SEPARATE PLANS
<br />SHALL BE SUBMITTED FOR APPROVAL BY A FIRE ALARM ENGINEER AND ALL
<br />PERMITS, INSPECTIONS AND APPROVALS SHALL BE OBTAINED FROM THE FIRE
<br />DEPARTMENT HAVING JURISDICTION.
<br />B.VIA SEPARATE SUBMITTAL BY SIGN CONTRACTOR, OBTAIN APPROVALS AND
<br />PERMITS FOR ALL SIGNS INCLUDING SIGN LIGHTING CERTIFICATE OF
<br />COMPLIANCE.
<br />C.VIA SEPARATE SUBMITTAL, OBTAIN APPROVALS AND PERMITS FOR ALL
<br />ELECTRICAL SUBSYSTEMS WITH POWER SUPPLIES OF MORE THAN 50 VA AND/OR
<br />250 VOLTS [E.G. SECURITY, TELCO/DATA, P.A, AUDIOVISUAL, HVAC CONTROLS,
<br />ETC.]
<br />DEMOLITION AND REWIRING SYMBOLS
<br />"E"ADJACENT TO LIGHT FIXTURE OR OUTLET SYMBOL OR IN CONDUIT RUN
<br />INDICATES EXISTING TO REMAIN. EXISTING CONDUCTORS TO REMAIN
<br />UNLESS OTHERWISE NOTED ON DRAWINGS.
<br />"EX"IN CONDUIT RUN INDICATES EXISTING CONDUIT RUN TO BE REWIRED.
<br />PULL OUT EXISTING WIRES AND INSTALL NEW WIRES, QUANTITY AS
<br />INDICATED BY HASH MARKS. REFER TO PLANS FOR WIRING
<br />REQUIREMENTS. PROVIDE OTHER SYSTEM CONDUCTORS PER
<br />SPECIFICATIONS.
<br />"EA"ADJACENT TO LIGHT FIXTURE OR OUTLET SYMBOL OR IN CONDUIT RUN
<br />INDICATES EXISTING TO BE ABANDONED. REMOVE DEVICE AND INSTALL
<br />BLANK PLATE AND PULL WIRES FROM CONDUIT AS REQUIRED.
<br />"R"ADJACENT TO LIGHT FIXTURE OR OUTLET SYMBOL OR IN CONDUIT RUN
<br />INDICATES EXISTING TO BE REMOVED. EXISTING CONDUIT AND WIRE TO
<br />BE COMPLETELY DISCONNECTED AND REMOVED BACK TO LAST
<br />REMAINING OUTLET OR DEVICE.
<br />"RR"ADJACENT TO ELECTRICAL OUTLET, EQUIPMENT, ETC. INDICATES
<br />EXISTING TO BE REMOVED AND REPLACE WITH NEW.
<br />"RL"ADJACENT TO ELECTRICAL OUTLET, EQUIPMENT, ETC. INDICATES
<br />EXISTING TO BE REMOVED AND RELOCATED.
<br />"R-X-E"
<br />"E-X-R"
<br />“X” INDICATES APPROXIMATE POINT OF INTERCEPTION OF EXISTING
<br />CONDUIT RUN. CONDUIT TO BE REMOVED AT “R” SIDE OF “X”. REMOVE
<br />ALL CONDUCTORS PRIOR TO CUTTING CONDUIT. EXACT LOCATION OF ALL
<br />CONDUITS SHALL BE FIELD VERIFIED. EXTEND CONDUIT AND WIRES TO
<br />MATCH EXISTING OR AS INDICATED ON PLANS. PROVIDE PULL BOX SIZE
<br />PER CEC REQUIREMENT.
<br />STAMP DATE: 04/13/2024
<br />PR
<br />O
<br />J
<br />E
<br />C
<br />T
<br />
<br />N
<br />A
<br />M
<br />E
<br />:
<br />PR
<br />O
<br />J
<br />E
<br />C
<br />T
<br />
<br />A
<br />D
<br />D
<br />R
<br />E
<br />S
<br />S
<br />:
<br />TU
<br />S
<br />T
<br />I
<br />N
<br />
<br />&
<br />
<br />S
<br />A
<br />N
<br />T
<br />A
<br />CL
<br />A
<br />R
<br />A
<br />23
<br />0
<br />1
<br />
<br />N
<br />
<br />T
<br />U
<br />S
<br />T
<br />I
<br />N
<br />
<br />A
<br />V
<br />E
<br />,
<br />
<br />S
<br />U
<br />I
<br />T
<br />E
<br />
<br />A
<br />SA
<br />N
<br />T
<br />A
<br />
<br />A
<br />N
<br />A
<br />,
<br />
<br />C
<br />A
<br />,
<br />
<br />9
<br />2
<br />7
<br />0
<br />5
<br />STORE #:
<br />PROJECT #:
<br />ISSUE DATE:
<br />DESIGN MANAGER:
<br />PRODUCTION DESIGNER:
<br />CHECKED BY:
<br />76085-018
<br />04-15-2024
<br />51969
<br />CHARLIE CHANG
<br />SEPIDEH SHARIFI
<br />MAGED GERGES
<br />2301 N Tustin Ave
<br />#A8/22/2024
|