2210 3%4 S Ritchey St # WCC01 - Plan

Home Browse Search

o Photos showing each individual sector after installation of modifications. Each entire sector must be in one photo to show the interconnection of members. ▪ These photos shall also certify that the placement and geometry of the equipment on the mount is as depicted in the antenna placement diagram in this form. o Photos that show the model number of each antenna and piece of equipment installed per sector. o Photos of each installed modification per the modification drawings; pictures shall also include connection hardware (U-bolts, bolts, nuts, all-threaded rods, etc.) o Photos showing the distances (relative distance between collars) of the installed modifications from the appropriate reference locations shown in the modification drawings. o Photos showing the installed modifications onto the tower (i.e. ring/collar mounts, tie- backs, V-bracing kits, etc.); if the existing mount elevation needs to be changed according to the modification drawings, an elevation measurement shall be provided before the elevation change. Material Certification: • Materials utilized must be as per specification on the drawings or the equivalent as validated by the SMART Tool vendor. o If the materials are as specified on the drawings ▪ The contractor shall provide the packing list, or the materials certifications for the materials utilized to perform the mount modification ▪ Commscope, Metrosite, Perfect Vision, Sabre, and Site Pro have all agreed to support Verizon vendors with the necessary material certifications o If seeking permission to use an equivalent ▪ It is required that the SMART Tool engineering vendor approval of such is included in the contractor submission package. There may be an additional charge for approval if the equivalent submission doesn’t meet specifications as prescribed in the drawings. ☐ All hardware has been properly installed, and the existing hardware was inspected. ☐ The material utilized was as specified on the SMART Tool engineering vendor Mount Modification Drawings and included in the material certification folder is a packing list or invoice for these materials. OR ☐ The material utilized was approved by a SMART Tool engineering vendor as an “equivalent” and this approval is included as part of the contractor submission. Antenna & Equipment Placement and Geometry Confirmation: ☐ The contractor certifies that the photos support and the equipment on the mount is as depicted on the sketch and table included in this form and with the mount analysis provided. 2210 3%4 S Ritchey St # WCC018/5/2024