Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.0.93 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2024 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />6 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />Copy - RAUN 216-10 - Base Anchor <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />6 <br />4/19/2024 <br />Coordinates Anchor [in.] <br />Anchor x y c-x c+x c-y c+y <br />1 -0.000 -4.000 ---- <br />2 -0.000 4.000 ---- <br />1.6 Installation data <br /> Anchor type and diameter: Kwik Bolt TZ2 - CS 3/4 (3 1/4) <br /> hnom1 <br /> Profile: Square HSS (AISC), HSS5X5X.375; (L x W x T) = 5.000 in. x 5.000 in. <br /> x 0.375 in. <br /> Item number: 2210311 KB-TZ2 3/4x5 1/2 <br /> Hole diameter in the fixture: df = - in. Maximum installation torque: 1,324 in.lb <br /> Plate thickness (input): 0.375 in. Hole diameter in the base material: 0.750 in. <br /> Hole depth in the base material: 4.250 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 5.500 in. <br /> Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br /> required. <br /> Hilti KB-TZ2 stud anchor with 4 in embedment, 3/4 (3 1/4) hnom1, Carbon steel, installation per ESR-4266 <br />1.6.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Manual blow-out pump • Torque wrench <br />• Hammer <br />1900 E 4th St - <br />1011190678/9/2024