Laserfiche WebLink
www.hilti.com <br />Hilti PROFIS Engineering 3.0.91 <br />Input data and results must be checked for conformity with the existing conditions and for plausibility! <br />PROFIS Engineering ( c ) 2003-2024 Hilti AG, FL-9494 Schaan Hilti is a registered Trademark of Hilti AG, Schaan <br />5 <br />Company: <br />Address: <br />Phone I Fax: <br />Design: <br />Fastening point: <br /> | <br />RAUN 216-6 POLYDOROS R80 GEN CABINET <br />Page: <br />Specifier: <br />E-Mail: <br />Date: <br />5 <br />3/11/2024 <br />6 Installation data <br /> Anchor type and diameter: Kwik Bolt TZ2 - CS 3/8 (1 1/2) <br /> hnom1 <br /> Profile: - Item number: 2210234 KB-TZ2 3/8x2 1/2 <br /> Hole diameter in the fixture: - Maximum installation torque: 361 in.lb <br /> Plate thickness (input): - Hole diameter in the base material: 0.375 in. <br /> Hole depth in the base material: 2.000 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material: 3.250 in. <br /> Cleaning: Manual cleaning of the drilled hole according to instructions for use is <br /> required. <br /> Hilti KB-TZ2 stud anchor with 1.875 in embedment, 3/8 (1 1/2) hnom1, Carbon steel, installation per ESR-4266 <br />6.1 Recommended accessories <br />Drilling Cleaning Setting <br />• Suitable Rotary Hammer <br />• Properly sized drill bit <br />• Manual blow-out pump • Torque controlled cordless impact tool <br />• Torque wrench <br />• Hammer <br />Coordinates Anchor in. <br />Anchor x y c-x c+x c-y c+y <br />1 0.000 0.000 ---- <br />1900 E 4th St - <br />1011190678/9/2024