2907 S Halladay St - 101119070, 20182651, 30147179 & 40139034 - Plan

Home Browse Search

Planning & Building Agency Building Safety Division 20 Civic Center Plaza P.O. Box 1988 (M-19) Santa Ana, CA 92702 (714) 647-5800 www.santa-ana.org INFORMATION REQUIRED FOR COMMERCIAL CANNABIS BUSINESS ELECTRICAL PLAN CHECK ELC_CCB-01 CEC A. APPLICABLE BUILDING STANDARDS B. PLAN CHECK REQUIRED 1.In addition to the requirements in the “Information Required for Electrical Plan Check Submittal” handout (ELC-01), the following requirements shall be included as part of an electrical plan submitted for a Commercial Cannabis Businesses (CCB). a.CCBs that perform extraction operations often use hazardous materials—volatile materials or asphyxiants. If the project includes the use of hazardous materials, detailed information is required. Without acceptable information, plan approval will not be given. i.Classification of hazardous areas or locations is not the responsibility of the authority having jurisdiction or the installing electrical contractor but of the design professional. ii.Classification requires the disclosure of materials involved, quantities, storage location and methods, handling, etc. iii.Hazardous area classification requires reference to other applicable standards to determine the classification of an area and the extent of that area or location. This process should include a team of professionals (experts in their fields) in the risk analysis and assessment. NFPA 497 Recommended Practice for the Classification of Flammable Liquids, Gases, or Vapors and of Hazardous (Classified) Locations for Electrical Installations in Chemical Process Area is among the other standards that must be used. iv.All hazardous (classified) locations must be properly documented. The documentation must be available to those who are authorized to design, install, inspect, maintain, or operate the electrical equipment. 2019 California Electrical Code (CEC) 500.4 b.For Hazardous locations, refer to CEC Articles 500, 501, and 502. c.All equipment located within hazardous locations must be approved. This requires that listing information and manufacturer’s installation instructions be provided. d.Any measures to mitigate the hazard or processes that cannot be suddenly stopped without increasing the hazard must be provided with a 2-hour emergency system as per CEC Articles 700, 701. e.Any generators and ATS equipment must be fully designed and detailed. Refer to CEC Articles 445, 700, 701, 702, 705. 2.This list of CCB requirements does not give permission for the installer/owner/operator, of said CCB, to violate any of the provisions set forth in the California Building Codes. California Building Code (CBC) California Electrical Code (CEC) California Green Building Standards (CAL Green) California Mechanical Code (CMC) California Plumbing Code (CPC) California Fire Code (CFC) Santa Ana Municipal Code (SAMC) California Energy Code (Title 24, Part 6) Page 1 of 1 Rev: 04/29/21 2907 S Halladay St - 101119070, 20182651, 30147179 & 40139034 7/22/2024