|
WALL FINISH NOTES:
<br />1. PROVIDE CORNER GUARDS ON EXPOSED CORNERS
<br />AS INDICATED IN RETAIL SALES.
<br />2. PROVIDE FRP CORNER GUARDS ON EXPOSED
<br />CORNERS AS INDICATED IN OPEN OFFICE.
<br />3. PROVIDE FRP TO +52" A.F.F.,TYP.
<br />4. PROVIDE FRP BETWEEN BACKSPLASH AND BOTTOM
<br />OF UPPER CABINET AT LAMINATE COUNTER LOCATION,
<br />TYP.
<br />5. PAINT DOORS & FRAMES IN SALES AREA TO MATCH
<br />ADJACENT WALL FINISH, HEAVY DUTY WASHABLE SEMI-
<br />GLOSS.
<br />6. PAINT DOORS AND FRAMES IN NON-SALES AREA TO
<br />MATCH ADJACENT WALL UNLESS OTHERWISE NOTED IN
<br />THE DOOR SCHEDULE, HEAVY DUTY WASHABLE SEMI
<br />GLASS ALKYD.
<br />7. OMIT WALL BASE BEHIND ALL MILLWORK WALL
<br />DISPLAY UNITS. ALL MILLWORK WALL DISPLAY UNITES
<br />COME WITH A PRE-INSTALLED BASE.
<br />FLOOR FINISH NOTES:
<br />1. ALL DIMENSIONS ARE FINISH DIMENSIONS.
<br />2. CONTRACTOR SHALL VERIFY ALL DIMENSIONS
<br />PRIOR TO ORDERING MATERIALS
<br />3. SEE FINISH SCHEDULE FOR SPECIFICATIONS
<br />4. GC SHALL APPLY TWO-PART EPOXY FLOOR SEALER
<br />TO SLAB.
<br />FLOOR FINISH PLAN LEGEND
<br />* SEE ROOM FINISH SCHEDULE
<br />XXX
<br />CG
<br />FINISH KEY:
<br />FINISH SYMBOL, REFER TO
<br />FINISH SCHEDULE
<br />FRP FINISH ON WALL
<br />FLOOR FINISH TRANSITION
<br />CORNER GUARDS
<br />X-X
<br />REFER TO SHEET A.6.1 FOR FINISH SCHEDULE
<br />(VF-2) VINYL COMPOSITE
<br />FLOORING
<br />(C-4) CARPET
<br />(M-4) ENTRANCE MATTING
<br />(CT-4) CERAMIC/PORCELAIN TILE
<br />(CP-1) CONCRETE SEALER
<br />LINE OF EXISTING FINISHED FLOOR
<br />SETTING BED AS REQUIRED
<br />BLACK HONED MARBLE SADDLE
<br />LINE OF FINISHED
<br />WALL
<br />LINE OF FINISHED WALL
<br />CERAMIC/PORCELAIN TILE
<br />1/8"
<br />V.I.F.
<br />±
<br />3
<br />/
<br />8
<br />"
<br />4 7/8"
<br />3/
<br />8
<br />"
<br />1/
<br />4
<br />"
<br />CARPET TILE
<br />CARPET TILE
<br />LINE OF EXISTING
<br />CONCRETE SLAB
<br />BURKE MERCER MOULDING
<br />#710 OR EQUAL,
<br />COLOR: 523 BLACK BROWN
<br />CONCRETE SLAB
<br />LINE OF EXISTING
<br />CONCRETE SLAB
<br />CARPET TILE
<br />1/8" THICK SATIN ANODIZED ALUMINUM ANGLE,
<br />"SCHENE" #AE45 (VERIFY HEIGHT AS
<br />REQUIRED) BY
<br />SCHLUTER SYSTEMS,
<br />TEL: (800) 472-4588, OR APPROVED EQUALVINYLTILE
<br />VINYLTILE
<br />LINE OF EXISTING FINISHED FLOOR
<br />SETTING BED AS REQUIRED
<br />BLACK HONED MARBLE SADDLE
<br />LINE OF FINISHED
<br />WALL
<br />LINE OF FINISHED WALL
<br />PORCELAIN TILE
<br />1/8"
<br />V.I.F.
<br />±
<br />3
<br />/
<br />8
<br />"
<br />4 7/8"
<br />3/
<br />8
<br />"
<br />1/
<br />4
<br />"
<br />ALUMINUM DOOR THRESHOLD
<br />PROVIDE FRP-6 TO +52" A.F.F.
<br />(TYP.), UNLESS OTHERWISE NOTED.
<br />PROVIDE FRP-6
<br />BETWEEN BACKSPLASH
<br />AND BOTTOM OF
<br />UPPER CABINET AT
<br />LAMINATE COUNTER
<br />LOCATION, TYP.
<br />VINYL TILE LAYOUT START POINT
<br />AND INSTALL IN STACKED BOND PATTERN
<br />PER MANUFACTURERS INSTALLATION
<br />METHODS.
<br />CORNER GUARD (CG-1)
<br />BLACK HONED MARBLE
<br />SADDLE, TYP.
<br />VF-2 CT-4
<br />RECESSED SLATWALL, SEE
<br />DETAIL 2/A.5.0
<br />RETAIL SALES
<br />101
<br />OPEN OFFICE
<br />104
<br />RESTROOM
<br />102
<br />RESTROOM
<br />103
<br />J.C.
<br />107
<br />TELCO
<br />108
<br />MANAGER
<br />106
<br />INVENTORY
<br />105
<br />EXISTING STAIR
<br />(N.I.C.)
<br />CL VF-2, ENTRY MAT &
<br />NEW ENTRY DOORS
<br />CT
<br />-4
<br />C-4
<br />CERAMIC TILE
<br />LAYOUT START POINT
<br />CT-4 CT-4
<br />CERAMIC TILE
<br />LAYOUT START POINT
<br />CL
<br />10'-0"
<br />VF-2 M-4
<br />VF-2
<br />PAINT EXISTING COLUMN P-1
<br />(PLUG ANY HOLES PRIOR TO PAINTING)
<br />WALL FLOOR BASE
<br />RETAIL SALES
<br />101
<br />P-1, CG-1 VF-2, M-4 VB-1
<br />WALL FLOOR BASE
<br />J.C.
<br />107
<br />P-3,
<br />FRP-6
<br />CP-1 VB-1
<br />WALL FLOOR BASE
<br />TELCO
<br />108
<br />P-3 CP-1 VB-1
<br />WALL FLOOR BASE
<br />OPEN OFFICE
<br />104
<br />P-3,
<br />FRP-6,
<br />CG-6
<br />C-4, M-4 VB-1
<br />WALL FLOOR BASE
<br />RESTROOM
<br />103
<br />P-3,
<br />FRP-6
<br />CT-4 CTB-4
<br />WALL FLOOR BASE
<br />RESTROOM
<br />102
<br />P-3,
<br />FRP-6
<br />CT-4 CTB-4
<br />WALL FLOOR BASE
<br />INVENTORY
<br />105
<br />P-3 C-4 VB-1
<br />WALL FLOOR BASE
<br />MANAGER
<br />106
<br />P-3 C-4 VB-1
<br />BLACK HONED
<br />MARBLE SADDLE, TYP.
<br />ALUMINUM DOOR THRESHOLD
<br />CORNER GUARD (CG-1)
<br />CORNER
<br />GUARD (CG-1)
<br />M-4
<br />1'-6"1'-6"
<br />LOCATION
<br />OF FRP-6
<br />3'-0"
<br />
<br />
<br />
<br />
<br />3
<br />'
<br />-
<br />0
<br />"
<br />CG-6, ACROVYN CORNER
<br />GUARDS TYP AT BOH
<br />WHERE INDICATED
<br />C-4 CP-1
<br /> 5'-0"
<br />4'
<br />-
<br />0
<br />"
<br />M-4
<br />CARPET TILE LAYOUT
<br />START POINT
<br />C-4
<br />M-4
<br />PROVIDE FRP-6
<br />BETWEEN BACKSPLASH
<br />AND BOTTOM OF
<br />UPPER CABINET AT
<br />LAMINATE COUNTER
<br />LOCATION, TYP.
<br />C-4
<br />C-4
<br />C-4
<br />C-4
<br />C-4
<br />CP-1
<br />CP-1
<br />C-4
<br />APPROXIMATE LOCATION OF
<br />NEW LEASE LINE
<br />NEW CORIAN SILL (SS-1)
<br />P-1
<br />P-
<br />1
<br />P-1
<br />SEE DETAIL 8 FOR
<br />RESTROOM TILE BASE, TYP.
<br />M-4 CP-1
<br />COOL GRAY 10 WINDOW FILM COOL GRAY 10 WINDOW FILM
<br />C-4 VF-2
<br />FUTURE TENANT
<br />(N.I.C.)
<br />3'
<br />-
<br />0
<br />"
<br />SEE DETAIL 5, SIM.
<br />SEE DETAIL 6
<br />SEE DETAIL 3
<br />SEE DETAIL 4
<br />2
<br />A.1.5
<br />P-1
<br />P-1P-3
<br />P-1 P-3
<br />ALCOVE FINISH
<br />IS P-1, (NO FRP)
<br />FLOORING PREP NOTES
<br />ALL CONCRETE FLOORING SUBSTRATES SHALL BE COATED WITH SPECIFIED 2-PART EPOXY
<br />MOISTURE BARRIER, EXCEPT FOR TELCO & JANITOR CLOSET, PRIOR TO INSTALLATION OF NEW
<br />FLOOR FINISHES. REFER TO SPECIFICATION IN STANDARD FINISHES SCHEDULE ON SHEET.
<br />INSTALLATION SHALL BE PER THE MANUFACTURER’S INSTRUCTIONS. CONCRETE SUBSTRATE SHALL
<br />BE GROUND OR SHOT-BLASTED PRIOR TO EPOXY COATING. GRINDING & SHOP BLASTING INCLUDES
<br />REMOVAL OF ANY EXISTING MASTIC, ADHESIVE, FLOOR STONE, OR LEVELING COMPOUND. A
<br />MANUFACTURER-RECOMMENDED PRIMER SHALL BE INSTALLED DIRECTLY OVER EPOXY COATING
<br />PRIOR TO INSTALLATION OF ANY NEW FLOOR FINISH OTHER THAN CARPET, INCLUDING NEW FLOOR
<br />STONE, LEVELING COMPOUND, OR OTHER UNDERLAYMENT MATERIAL.
<br />NEW CARPET AREAS:
<br />WHERE NEW CARPET WILL BE LOCATED IN AREAS OF EXISTING EPOXY/POLYMER FLOORING,
<br />INSTALL CARPET DIRECTLY OVER EPOXY/POLYMER. PRIOR TO CARPET INSTALLATION, CLEAN
<br />EPOXY/POLYMER AND VERIFY THAT THERE ARE NO EXISTING AREAS OF DELAMINATION.
<br />NEW CERAMIC TILE AREAS:
<br />WHERE NEW CERAMIC TILE WILL BE LOCATED IN AREAS OF EXISTING EPOXY/POLYMER FLOORING,
<br />CLEAN THE EPOXY/POLYMER WITH A HIGH ALKALINE PSP PRODUCT, FOLLOWED BY INSTALLATION
<br />OF TEC TA560 MULTI-PURPOSE PRIMER AT FULL STRENGTH. PRIOR TO PRIMER COATING, VERIFY
<br />THAT THERE ARE NO EXISTING AREAS OF DELAMINATION. INSTALL TILE USING A MODIFIED LATEX
<br />MORTAR.
<br />NEW LUXURY VINYL TILE AREAS:
<br />FOR ANY PORTIONS OF LUXURY VINYL TILE TO BE INSTALLED OVER EXISTING EPOXY/POLYMER
<br />FLOORING, SCARIFY THE EPOXY/POLYMER BY BEAD-BLASTING. PRIOR TO INSTALLING LVT OR
<br />ANY LEVELING COMPOUNDS, VERIFY THAT THERE ARE NO EXISTING AREAS OF DELAMINATION.
<br />APPLY GLUE AND INSTALL THE LVT AS DIRECTED BY THE MANUFACTURER.
<br />SUBSTRATE CERTIFICATION AND INSPECTION
<br />MEASUREMENTS FOR FLATNESS ARE TO BE PERFORMED WITH A ROTARY LASER, A DRY
<br />LINE, AND A 10' STRAIGHTEDGE.
<br />THE ROTARY LASER IS TO BE SET LEVEL AND A MINIMUM OF 8 MEASUREMENTS MADE IN A
<br />RADIAL PATTERN.
<br />THE SLAB MUST MEET THE TOLERABLE LIMITS OF THE MANUFACTURER, CONCRETE, AND
<br />WOOD SUBFLOORS FLAT TO WITHIN 3/16" IN 10 FEET.
<br />ARCHITECTURAL SYSTEMS, INC. IS THE ACCEPTABLE STANDARD FOR THE INSPECTION.
<br />A REPORT ALONG WITH PHOTOS MUST BE SUBMITTED AFTER THE INSPECTION IS
<br />PERFORMED SIMILAR TO THE ATTACHED FILE.
<br />PLEASE REFER THE GC'S TO THE NATIONAL INSTITUTE OF CERTIFIED FLOORCOVERING
<br />INSPECTORS TO FIND QUALIFIED INSPECTORS IN THEIR AREA. THE WEBSITE IS
<br />HTTP://WWW.NICFI.ORG/
<br />ALUMINUM 1/2" SADDLE THRESHOLD
<br />AS PER A.D.A. REQUIREMENTS
<br />1/8" THICK SATIN ANODIZED ALUMINUM
<br />ANGLE "SCHIENE" AE110 (VERIFY HEIGHT
<br />AS REQUIRED) BY SCHLUTER SYSTEMS
<br />OR APPROVED EQUAL.
<br />VINYL FLOORINGEXISTING UNFINISHED FLOOR
<br />CONTRACTOR SHALL FEATHER IN FLASHING A
<br />MINIMUM OF 12" ALL AROUND HIGH POINT (OR AS
<br />REQUIRED) TO KEEP A SMOOTH AND FLUSH
<br />TRANSITION AND MAINTAIN A 1:48 MAX. SLOPE.
<br />EXISTING EXTERIOR SURFACE FINISH
<br />2
<br />1
<br />ENTRY MAT
<br />FRONTRUNNER LP PLUS
<br />1/
<br />4
<br />"
<br />
<br />M
<br />A
<br />X
<br />.
<br />MA
<br />X
<br />.
<br />1/
<br />2
<br />"
<br /> 15/16"
<br />SLOPED
<br />12" MIN.±3
<br />/
<br />1
<br />6
<br />"
<br />±3
<br />/
<br />1
<br />6
<br />"
<br />SEE PLAN
<br />ADD CAULKING AT
<br />WALL PERIMETER
<br />SCHLUTER EDGE TRIM,
<br />SEE FINISH SCHEDULE
<br />TILE BASE, SEE FINISH
<br />SCHEDULE
<br />FINISH FLOORING
<br />PLACE TILE BASE ABOVE
<br />FINISH FLOORING
<br />FACE OF WALL
<br />ADD GROUT BETWEEN
<br />TILE BASE AND
<br />SCHLUTER, SEE FINISH
<br />SCHEDULE
<br />ADD GROUT BETWEEN
<br />FLOORING AND TILE BASE,
<br />SEE FINISH SCHEDULE
<br />LINE OF EXISTING
<br />CONCRETE SLAB
<br />CARPET TILE
<br />1/8" THICK SATIN ANODIZED ALUMINUM ANGLE,
<br />"SCHENE" #AE45 (VERIFY HEIGHT AS
<br />REQUIRED) BY
<br />SCHLUTER SYSTEMS,
<br />TEL: (800) 472-4588, OR APPROVED EQUALPORCELAIN TILE
<br />Kenneth A. Gruskin AIA
<br />No. Date Description
<br />Consultant:
<br />Checked By:
<br />Drawn By:
<br />Job Address:
<br />Drawing Title:
<br />Revision Issue:
<br />Professional Seal:
<br />Drawing Number:
<br />2024 Gruskin Architecture + Design, P.C.c
<br />This document and the ideas and designs incorporated
<br />herein, as an instrument of professional service, is the
<br />property of GRUSKIN ARCHITECTURE + DESIGN, P.C.,
<br />and is not to be used in whole or in part for any other
<br />project without the written authorization of GRUSKIN
<br />ARCHITECTURE + DESIGN, P.C.
<br />North
<br />Arrow:
<br />Job Name and Number:
<br />Date Issued For
<br />All Rights Reserved
<br />Client:
<br />Landlord:
<br />Permit:
<br />Bid:
<br />Construction:
<br />0006261
<br />AR91629
<br />5421
<br />9613
<br />39209
<br />10635
<br />2537
<br />11016
<br />5734
<br />ARC 2596
<br />4674
<br />2666
<br />AI 09999
<br />2796
<br />0401 011223
<br />2572
<br />17680
<br />RA-015432-B
<br />025528-1 NY
<br />TX
<br />VA
<br />VT
<br />MA
<br />MT
<br />RI
<br />PA
<br />NY
<br />NJ
<br />NH
<br />MD
<br />LA
<br />ME
<br />KS
<br />FL
<br />DE
<br />CT
<br />AZ
<br />AL
<br />C-1967WY
<br />RA011075GA
<br />AR10400066IN
<br />C 29898CA
<br />NM 004168
<br />ARC-400347CO
<br />HI AR 11489
<br />PR 19965
<br />OR 4899
<br />SC 6834
<br />NC 9961
<br />13761OH
<br />05713IA
<br />WV 3727
<br />IL 001-019152
<br />UT 5881358-0301
<br />ID AR-984459
<br />1301052379MI
<br />ARC100723DC
<br />WI 9900-005MN 44326
<br />A-3547NE
<br />3811AR
<br />5967KY 101374TN
<br />MS 3860
<br />1666ND
<br />A-2005029740MO
<br />a4895OK
<br />NV 5521
<br />WA 10344
<br />13167AK
<br />SD 11532
<br />J:
<br />\
<br />V
<br />e
<br />r
<br />i
<br />z
<br />o
<br />n
<br />\
<br />0
<br />0
<br />
<br />S
<br />t
<br />o
<br />r
<br />e
<br />s
<br />
<br />b
<br />y
<br />
<br />S
<br />t
<br />a
<br />t
<br />e
<br />\
<br />C
<br />a
<br />l
<br />i
<br />f
<br />o
<br />r
<br />n
<br />i
<br />a
<br />\
<br />2
<br />0
<br />2
<br />3
<br />-
<br />0
<br />0
<br />6
<br />9
<br />
<br />M
<br />e
<br />t
<br />r
<br />o
<br />
<br />P
<br />o
<br />i
<br />n
<br />t
<br />e
<br />-
<br />S
<br />a
<br />n
<br />t
<br />a
<br />
<br />A
<br />n
<br />a
<br />,
<br />
<br />C
<br />A
<br />\
<br />2
<br />.
<br />D
<br />r
<br />a
<br />w
<br />i
<br />n
<br />g
<br />s
<br />\
<br />2
<br />.
<br />4
<br />
<br />C
<br />D
<br />\
<br />0
<br />0
<br />-
<br />2
<br />0
<br />2
<br />3
<br />-
<br />0
<br />0
<br />6
<br />9
<br />-
<br />C
<br />u
<br />r
<br />r
<br />e
<br />n
<br />t
<br />\
<br />2
<br />0
<br />2
<br />3
<br />-
<br />0
<br />0
<br />6
<br />9
<br />-
<br />B
<br />I
<br />M
<br />2
<br />3
<br />.
<br />r
<br />v
<br />t
<br />2023-0069
<br />Proposed
<br />Store Design
<br />for: VERIZON
<br />Metro Pointe
<br />3500 South Bristol Street
<br />Suite 100
<br />Santa Ana, CA 92704
<br />3/15/24
<br />3/15/24
<br />FLOOR AND WALL FINISH
<br />PLAN AND DETAILS
<br />A.1.5
<br />MB
<br />KG
<br />15 OF 81
<br />FLOOR FINISH AREAS
<br />FINISH TAG FINISH DESCRIPTION
<br />APPROXIMATE
<br />AREA
<br />C-4 CARPET (C-4)930 SF
<br />CP-1 CONCRETE SEALER (CP- 1) 165 SF
<br />CT-4 CERAMIC TILE (CT-4) 136 SF
<br />M-4 CARPET (M-4)83 SF
<br />VF-2 VINYL FLOORING (VF-2)-GRID 1342 SF
<br />12" = 1'-0"6 CARPET TO CERAMIC/PORCELAIN TILE DETAIL
<br />12" = 1'-0"5 CARPET TO SLAB DETAIL
<br />12" = 1'-0"4
<br />VINYL TILE FLOOR
<br />TO CARPET DETAIL
<br />12" = 1'-0"3
<br />VINYL TILE FLOOR
<br />TO CERAMIC/PORCELAIN TILE DETAIL
<br />1/4" = 1'-0"
<br />Version: 070720
<br />1 FLOOR FINISH PLAN
<br />**ALL QUANTITIES GIVEN ARE CALCULATED FROM
<br />DRAWINGS PROVIDED AND ARE INTENDED TO ASSIST THE
<br />VENDOR IN COMPILING ORDERS. VENDOR IS STILL
<br />RESPONSIBLE FOR TOTAL QUANTITIES REQUIRED TO
<br />INSTALL A FULL AND COMPLETE JOB AND FOR FINAL FIELD
<br />MEASUREMENTS IF NECESSARY.
<br />12" = 1'-0"2 ENTRY THRESHOLD TO ENTRY MAT TO VINYL TILE FLOOR DETAIL
<br />Version: 052720
<br />12" = 1'-0"8 TYPICAL RESTROOM WALL BASE DETAIL
<br />Version: 110620
<br />12" = 1'-0"7 PORCELAIN TILE TO CARPET DETAILNOT U
<br />S
<br />E
<br />D
<br />3500 S Bristol St Unit# 100 -
<br />101119098, 20182666 &
<br />401390437/11/2024
|